Turn signal screws

sze5003 · September 13th, 2012, 05:44 PM

So as I have been riding my ninja this summer, finally got into traffic! So much fun..but it seems I lost the left side rear turn signal screw. Does anyone know the dimensions of this screw I could pick up tomorrow at a hardware store?

I want to ride after work tomorrow but I am afraid I may get pulled over as the left rear signal hangs kind of down. I also plan on taking the bike to get inspected soon too.

Just don't know if I will be pulled over for this? I didn't drop the bike I'm not sure how the screw got loose other than I was going over bumps in the road. Or my cover must have snagged and it got loose.

Hunsy34 · September 13th, 2012, 06:34 PM

I lost my right rear screw the other day and would need the dimensions of the also

sze5003 · September 13th, 2012, 07:00 PM

I found some normal fat looking screws around the house. I'm going to try it tomorrow to see if it holds it well. I can easily order it from powersportsplus but it would take so long to get to me I wouldn't be able to ride when I want.

Hunsy34 · September 14th, 2012, 10:45 AM

I'll probably just take the other screw out go to a hardware store and have them match it up for me.

sze5003 · September 14th, 2012, 11:09 PM

You can use any medium thickness screw just not so long. I found an extra one that came with the battery I bought a while back and that went on fine. Just careful not to hit big bumps going so fast. The tail light section is sticking out a bit too but I checked it and it seems to be secured fine under the seat.

September 13th, 2012, 05:44 PM	#1
sze5003 ninjette.org member Name: Salim Location: Philadelphia Join Date: May 2012 Motorcycle(s): 2005 SV650S Posts: 195	Turn signal screws So as I have been riding my ninja this summer, finally got into traffic! So much fun..but it seems I lost the left side rear turn signal screw. Does anyone know the dimensions of this screw I could pick up tomorrow at a hardware store? I want to ride after work tomorrow but I am afraid I may get pulled over as the left rear signal hangs kind of down. I also plan on taking the bike to get inspected soon too. Just don't know if I will be pulled over for this? I didn't drop the bike I'm not sure how the screw got loose other than I was going over bumps in the road. Or my cover must have snagged and it got loose.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Looking for 09 oem rear turn signal and front turn signals and tail fairings	mbbernas	Items Wanted	1	September 11th, 2013 10:48 AM
turn signal help	akcalhoun	2008 - 2012 Ninja 250R Tech Talk	24	February 25th, 2013 06:09 PM
'08 Turn Signal Relay	Countersteer	Motorcycle-related	0	June 10th, 2012 01:54 PM
Turn signal went out, looking for a new turn signal	austinm911	2008 - 2012 Ninja 250R Farkles	3	January 23rd, 2011 08:58 PM
WTB: Windscreen screws and stock turn signal lights	00v_Lucky	Items Wanted	1	August 16th, 2009 10:52 PM

September 13th, 2012, 06:34 PM	#2
Hunsy34 ninjette.org member Name: Jason Location: Doylestown, PA Join Date: Feb 2010 Motorcycle(s): 2009 Ninja 250 2016 Ninja 300 1994 KTM 300 EXC Posts: 123	I lost my right rear screw the other day and would need the dimensions of the also

September 13th, 2012, 07:00 PM	#3
sze5003 ninjette.org member Name: Salim Location: Philadelphia Join Date: May 2012 Motorcycle(s): 2005 SV650S Posts: 195	I found some normal fat looking screws around the house. I'm going to try it tomorrow to see if it holds it well. I can easily order it from powersportsplus but it would take so long to get to me I wouldn't be able to ride when I want.

September 14th, 2012, 10:45 AM	#4
Hunsy34 ninjette.org member Name: Jason Location: Doylestown, PA Join Date: Feb 2010 Motorcycle(s): 2009 Ninja 250 2016 Ninja 300 1994 KTM 300 EXC Posts: 123	I'll probably just take the other screw out go to a hardware store and have them match it up for me.

September 14th, 2012, 11:09 PM	#5
sze5003 ninjette.org member Name: Salim Location: Philadelphia Join Date: May 2012 Motorcycle(s): 2005 SV650S Posts: 195	You can use any medium thickness screw just not so long. I found an extra one that came with the battery I bought a while back and that went on fine. Just careful not to hit big bumps going so fast. The tail light section is sticking out a bit too but I checked it and it seems to be secured fine under the seat.