FS: 2008 Ninja 250 (Black) Complete Part Out

Baddog · August 16th, 2012, 11:45 AM

I'll get pictures up as soon as I can get them all taken and uploaded. For now here is a list of the parts, OBO asking prices and a video of the engine running prior to breakdown of the bike. Please PM me if you need a part and it isn't listed.

** Note **
While I am new to this forum, I'm not new to the bike scene or to selling bike parts. Please don't PM me (or ask in a public post) for a lowball figure on a part. I understand prices are OBO and everyone wants a deal, but I can't give the stuff away.

Engine Video
http://youtu.be/YyY6SlbavEg

Pictures So Far:
http://s488.photobucket.com/albums/r...008_Ninja_250/

All Prices OBO Plus Shipping from 17777

Engine 5630 Miles 650.00
Starter 55.00
Starter Solenoid 20.00
Clip On (Left) 80.00
Clip on (Right) 80.00
turn signal/light cluster 30.00
Horn 5.00
choke cable 15.00
Clutch Cable 10.00
Instrument Cluster 120.00
Tank (Small Dent) 120.00
Fuel pump 50.00
Tank Side Covers 35.00 (Sold RH)
rear sets 160.00
air box 30.00
tail light 30.00
rear seat 50.00
rider seat 65.00
rear caliper/assy 40.00
Swingarm 40.00
Shock Linkage 25.00
reservoirs
wiring harness 50.00
Throttle Cables 10.00
ecu 75.00
battery tray 20.00
chain 20.00
radiator 175.00
front fender 70.00
chain guard 20.00
Front Engine Mounts 15.00
Tweeked Frame
Forks (one slightly bent, other looks straight) Bike hit on the top of the sub frame. Bend in fork from rolling on to side.
Lower Triple Tree 80.00
Upper Triple Tree w/ignition 150.00
Tail fairings

Squalo · August 16th, 2012, 12:01 PM

Could I get pictures of the mirrors. Pm if you would like email.

Cheers

Baddog · August 16th, 2012, 12:17 PM

Quote:

Originally Posted by Squalo

Could I get pictures of the mirrors. Pm if you would like email.

Cheers

Sure: The one just needs the glass but the other is perfect

BlueJeepYJ · August 16th, 2012, 07:53 PM

Hi!

My plastic on my gauge cluster is cracked. I am interested in just the cover if you would split it up. No worries if not!

Thanks!

Jeff

Ausoi · August 16th, 2012, 08:06 PM

Do you have the upper fairing stay? And is it bent? I'd be interested if you do.

Bob2010 · August 16th, 2012, 08:39 PM

Willing to split the fairings?

Kygirl · August 16th, 2012, 09:09 PM

Found a buyer for the stock levers? Also looking for the smaller black right side cover and carb boots and carb clamps if you are selling them separately from the carbs. Thanks!

Ambar · August 16th, 2012, 09:12 PM

Interested in the forks if they're straight

Domagoj · August 17th, 2012, 02:49 AM

I am interested in both wheels if you are willing to ship to Croatia (Europe). I realise that shipping will be pretty steep but I'm fine with that.

Baddog · August 17th, 2012, 03:33 AM

Quote:

Originally Posted by BlueJeepYJ

Hi!

My plastic on my gauge cluster is cracked. I am interested in just the cover if you would split it up. No worries if not!

Thanks!

Jeff

Sorry Jeff, can't do that.

Baddog · August 17th, 2012, 03:33 AM

Quote:

Originally Posted by Bob2010

Willing to split the fairings?

Sure thing. Which ones were you interested in?

Baddog · August 17th, 2012, 03:35 AM

Quote:

Originally Posted by Ambar

Interested in the forks if they're straight

I have to pull them and the engine today yet then I think I'm done with teardown. I'll let you know after I check them.

Baddog · August 17th, 2012, 03:36 AM

Quote:

Originally Posted by Domagoj

I am interested in both wheels if you are willing to ship to Croatia (Europe). I realise that shipping will be pretty steep but I'm fine with that.

Normally I'd dismiss such an offer as spam, but as you have almost 300 posts I am guessing yer a valid member. I'd be happy to ship, but you really can't find any local there for less money?

Baddog · August 17th, 2012, 03:39 AM

Quote:

Originally Posted by Kygirl

Found a buyer for the stock levers? Also looking for the smaller black right side cover and carb boots and carb clamps if you are selling them separately from the carbs. Thanks!

I have not sold anything yet, so yer in luck. I can send you pics of the levers if you like. The one is perfect but the other has a few scratches on the end. nothing hideous.

I'm not sure which cover you are referring to? The one that runs between the tank and the upper fairings? or the little round frame covers?

I can sell the boots and clamps separate. I'll check on what they run. In the mean time, let me know about that cover and i'll grab a pic of the levers for you.

Baddog · August 17th, 2012, 03:41 AM

Just as a side note folks. If I miss replying to you in the thread, please feel free to PM me so I see it. I have a terrible attention span and well...Squirrel!! lol

Ambar · August 17th, 2012, 08:49 AM

Quote:

Originally Posted by Baddog

I have to pull them and the engine today yet then I think I'm done with teardown. I'll let you know after I check them.

No worries. I'm not in a huge hurry

nycsteve · August 17th, 2012, 01:39 PM

I need the front rotor ASAP. PM me. I sent a PM just in case!

nycsteve · August 17th, 2012, 01:44 PM

I'll also take the front brake caliper. I'll pick up locally if thats ok and I pay CASH ASAP.

xSean13 · August 18th, 2012, 07:02 AM

Just wondering if you have the bolts for the clutch and brake lever. I need the front brake lever bolt & I know someone else on here needs the clutch lever bolt.

I ordered some "OEM" ones via ronayers but they're completely different and don't work

Let me know, thanks.

Baddog · August 19th, 2012, 10:07 AM

Ok, I think I have replied to all PM's. If I've missed you, please let me know via PM so I get an alert.

Baddog · August 19th, 2012, 10:07 AM

Quote:

Originally Posted by xSean13

Just wondering if you have the bolts for the clutch and brake lever. I need the front brake lever bolt & I know someone else on here needs the clutch lever bolt.

I ordered some "OEM" ones via ronayers but they're completely different and don't work

Let me know, thanks.

Sure, let me check what a good price might be. I'll PM you.

Baddog · August 19th, 2012, 10:32 AM

Quote:

Originally Posted by Baddog

Sure, let me check what a good price might be. I'll PM you.

Replied via PM.

Panda · August 19th, 2012, 11:23 AM

Would you be willing to part out the gear shift peddle?

Baddog · August 19th, 2012, 12:08 PM

Quote:

Originally Posted by rPanda

Would you be willing to part out the gear shift peddle?

Sure. Did you just need the lever and the boot or did you need the linkage as well?

The pedal bolt is pending a sale already.

Panda · August 19th, 2012, 12:33 PM

Just the lever itself

Bob2010 · August 19th, 2012, 01:49 PM

I'm checking to see if the left side fairing is (1) the same style from 2008-2009 and (2) if it's same paint code , diablo black

fleemos · August 19th, 2012, 07:45 PM

How much would both lower swingarm bolt caps be to 30342?

psych0hans · August 19th, 2012, 08:20 PM

Can you please quote me for the tail fairings?

soundsfasterthanitis · August 19th, 2012, 08:47 PM

Is the clutch cable boot in good shape? How much shipped to 53190?

abhijitz · August 19th, 2012, 08:55 PM

Wheels and Engine still available?

Panda · August 19th, 2012, 09:34 PM

Quote:

Originally Posted by Baddog

Sure. Did you just need the lever and the boot or did you need the linkage as well?

The pedal bolt is pending a sale already.

Just the lever it is art 13242A. How much would it be to ship to 10010?

Thanks

Baddog · August 20th, 2012, 06:44 AM

Quote:

Originally Posted by fleemos

How much would both lower swingarm bolt caps be to 30342?

Can you let me know what part number you're looking for? I'm not familiar with the swingarm cap.

http://www.ronayers.com/Fiche/TypeID...roup/Swingarm_

Thanks!

Baddog · August 20th, 2012, 06:57 AM

Quote:

Originally Posted by psych0hans

Can you please quote me for the tail fairings?

Are these the items you are talking about?

36040H 36040-0063-6Z COVER-TAIL,CNT,F.BLAC 1
36040 36040-0061-H8 COVER-TAIL,LH,EBONY 1
36040D 36040-0062-H8 COVER-TAIL,RH,EBONY 1

http://www.ronayers.com/Fiche/TypeID...s_Chain_Cover_

Baddog · August 20th, 2012, 06:57 AM

Quote:

Originally Posted by abhijitz

Wheels and Engine still available?

Wheels are pending sale.

Engine is still available.

Baddog · August 20th, 2012, 07:06 AM

Quote:

Originally Posted by soundsfasterthanitis

Is the clutch cable boot in good shape? How much shipped to 53190?

Clutch cable is in great shape yet.

$10 for the cable

Shipping is $5 With Signature Conf. Just PM me if you want it and I'll provide paypal address.

Baddog · August 20th, 2012, 07:18 AM

Quote:

Originally Posted by rPanda

Just the lever it is art 13242A. How much would it be to ship to 10010?

Thanks

I'm looking at these 2 parts. Please confirm:

13242A 13242-0050 LEVER-ASSY-CHANGE,PED 1
92161 92161-1300 DAMPER,CHANGE LEVER 1

http://www.ronayers.com/Fiche/TypeID...nge_Mechanism_

Parts: $25
I can ship to you for $5 with signature confirmation

So a total of $30 if you like.

PM me if you'd like it and i'll provide you with a paypal address.

Baddog · August 20th, 2012, 07:19 AM

I "think" I've replied to everyone. If you messaged me or posted and I haven't replied, please PM me.

Thanks folks.

psych0hans · August 20th, 2012, 07:53 AM

Quote:

Originally Posted by Baddog

I "think" I've replied to everyone. If you messaged me or posted and I haven't replied, please PM me.

Thanks folks.

Hey bro, this is what I'm looking for...

Rear tail fairing

Baddog · August 20th, 2012, 08:10 AM

Quote:

Originally Posted by psych0hans

Hey bro, this is what I'm looking for...

Rear tail fairing

The left one is perfect, the right one has 2 cracks that are repairable.
http://i488.photobucket.com/albums/r.../tail-assy.jpg
http://i488.photobucket.com/albums/r...a_250/tail.jpg

$60 for both plus shipping?

Bob2010 · August 20th, 2012, 11:24 AM

Let me know if i should PM my question I posted

August 16th, 2012, 11:45 AM	#1
Baddog ninjette.org member Name: Kevin Location: NE PA Join Date: Jun 2012 Motorcycle(s): 04 ZX 6R-636, 06 ZX 10 Posts: 203	FS: 2008 Ninja 250 (Black) Complete Part Out I'll get pictures up as soon as I can get them all taken and uploaded. For now here is a list of the parts, OBO asking prices and a video of the engine running prior to breakdown of the bike. Please PM me if you need a part and it isn't listed. Note While I am new to this forum, I'm not new to the bike scene or to selling bike parts. Please don't PM me (or ask in a public post) for a lowball figure on a part. I understand prices are OBO and everyone wants a deal, but I can't give the stuff away. Engine Video http://youtu.be/YyY6SlbavEg Pictures So Far: http://s488.photobucket.com/albums/r...008_Ninja_250/ All Prices OBO Plus Shipping from 17777 Engine 5630 Miles 650.00 Starter 55.00 Starter Solenoid 20.00 Clip On (Left) 80.00 Clip on (Right) 80.00 turn signal/light cluster 30.00 Horn 5.00 choke cable 15.00 Clutch Cable 10.00 Instrument Cluster 120.00 Tank (Small Dent) 120.00 Fuel pump 50.00 Tank Side Covers 35.00 (Sold RH) rear sets 160.00 air box 30.00 tail light 30.00 rear seat 50.00 rider seat 65.00 rear caliper/assy 40.00 Swingarm 40.00 Shock Linkage 25.00 reservoirs wiring harness 50.00 Throttle Cables 10.00 ecu 75.00 battery tray 20.00 chain 20.00 radiator 175.00 front fender 70.00 chain guard 20.00 Front Engine Mounts 15.00 Tweeked Frame Forks (one slightly bent, other looks straight) Bike hit on the top of the sub frame. Bend in fork from rolling on to side. Lower Triple Tree 80.00 Upper Triple Tree w/ignition 150.00 Tail fairings Last futzed with by Baddog; October 9th, 2012 at 09:30 AM.

August 16th, 2012, 08:39 PM	#6
Bob2010 ninjette.org sage Name: Bob Location: NY Join Date: Jul 2012 Motorcycle(s): 2010 Ninja 250 2009 Ninja 250 Posts: 730	Willing to split the fairings? __________________________________________________ 2010 Red Ninja 250 2009 Black Ninja 250 -If you ride like lightning,you're gonna crash like thunder-

August 17th, 2012, 01:39 PM	#17
nycsteve Biker Name: Steve Location: Brooklyn, NY Join Date: Nov 2011 Motorcycle(s): 2010 Ninja 250 SE Posts: 723	I need the front rotor ASAP. PM me. I sent a PM just in case! __________________________________________________ S*** Happens! Design Stuff \| Tumblr James 1:2-4

August 17th, 2012, 01:44 PM	#18
nycsteve Biker Name: Steve Location: Brooklyn, NY Join Date: Nov 2011 Motorcycle(s): 2010 Ninja 250 SE Posts: 723	I'll also take the front brake caliper. I'll pick up locally if thats ok and I pay CASH ASAP. __________________________________________________ S*** Happens! Design Stuff \| Tumblr James 1:2-4

August 19th, 2012, 01:49 PM	#26
Bob2010 ninjette.org sage Name: Bob Location: NY Join Date: Jul 2012 Motorcycle(s): 2010 Ninja 250 2009 Ninja 250 Posts: 730	I'm checking to see if the left side fairing is (1) the same style from 2008-2009 and (2) if it's same paint code , diablo black __________________________________________________ 2010 Red Ninja 250 2009 Black Ninja 250 -If you ride like lightning,you're gonna crash like thunder-

August 16th, 2012, 12:01 PM	#2
Squalo ninjette.org member Name: Canada Location: Alberta Join Date: May 2011 Motorcycle(s): 09 Ninja 250 Posts: 55	Could I get pictures of the mirrors. Pm if you would like email. Cheers

August 16th, 2012, 07:53 PM	#4
BlueJeepYJ Lets go ride! Name: Jeff Location: Kennesaw, GA Join Date: Mar 2009 Motorcycle(s): Ninja 650 Posts: 234	Hi! My plastic on my gauge cluster is cracked. I am interested in just the cover if you would split it up. No worries if not! Thanks! Jeff

August 16th, 2012, 08:06 PM	#5
Ausoi ninjette.org member Name: Joshua Location: Loomis, CA Join Date: Jan 2012 Motorcycle(s): 2008 (Black) Kawasaki Ninja 250R Posts: 151	Do you have the upper fairing stay? And is it bent? I'd be interested if you do.

August 16th, 2012, 09:09 PM	#7
Kygirl ninjette.org member Name: Sarah Location: Kentucky Join Date: Apr 2012 Motorcycle(s): 2008 ninja 250R 1979 SuzukiGS425E Posts: 94	Found a buyer for the stock levers? Also looking for the smaller black right side cover and carb boots and carb clamps if you are selling them separately from the carbs. Thanks!

August 16th, 2012, 09:12 PM	#8
Ambar ninjette.org member Name: Sharon Location: Torrance CA Join Date: Apr 2011 Motorcycle(s): green ninja 250 Posts: 69	Interested in the forks if they're straight

August 17th, 2012, 02:49 AM	#9
Domagoj ninjette.org guru Name: Domagoj Location: Rijeka, Croatia Join Date: Aug 2010 Motorcycle(s): Ninja 250r 2009 Posts: 396	I am interested in both wheels if you are willing to ship to Croatia (Europe). I realise that shipping will be pretty steep but I'm fine with that.

August 17th, 2012, 03:41 AM	#15
Baddog ninjette.org member Name: Kevin Location: NE PA Join Date: Jun 2012 Motorcycle(s): 04 ZX 6R-636, 06 ZX 10 Posts: 203	Just as a side note folks. If I miss replying to you in the thread, please feel free to PM me so I see it. I have a terrible attention span and well...Squirrel!! lol

August 18th, 2012, 07:02 AM	#19
xSean13 ninjette.org certified postwhore Name: Sean Location: Middle TN Join Date: Apr 2012 Motorcycle(s): 2010 Ninja 250r (sold) / '03 CBR 600RR Posts: A lot.	Just wondering if you have the bolts for the clutch and brake lever. I need the front brake lever bolt & I know someone else on here needs the clutch lever bolt. I ordered some "OEM" ones via ronayers but they're completely different and don't work Let me know, thanks.

August 19th, 2012, 10:07 AM	#20
Baddog ninjette.org member Name: Kevin Location: NE PA Join Date: Jun 2012 Motorcycle(s): 04 ZX 6R-636, 06 ZX 10 Posts: 203	Ok, I think I have replied to all PM's. If I've missed you, please let me know via PM so I get an alert.

August 19th, 2012, 11:23 AM	#23
Panda not an actual panda Name: dan Location: philadelphia Join Date: Aug 2012 Motorcycle(s): 2008 Ninja 250, 2009 CBR600RR (Sold) Posts: A lot.	Would you be willing to part out the gear shift peddle?

August 19th, 2012, 12:33 PM	#25
Panda not an actual panda Name: dan Location: philadelphia Join Date: Aug 2012 Motorcycle(s): 2008 Ninja 250, 2009 CBR600RR (Sold) Posts: A lot.	Just the lever itself

August 19th, 2012, 07:45 PM	#27
fleemos ninjette.org guru Name: Darren Location: Sandy Springs, GA Join Date: Apr 2012 Motorcycle(s): 2012 Yamaha FZ6R, 2014 Suzuki GSX-R600 Posts: 299	How much would both lower swingarm bolt caps be to 30342?

August 19th, 2012, 08:20 PM	#28
psych0hans ninjette.org certified postwhore Name: Hansveer Location: Bombay, India Join Date: Jan 2012 Motorcycle(s): Ninja 250r - Track whore, Ninja 300 - SOLD, KTM RC390 - Orange Hulk, Ducati 899 Panigale - Red Devil. Posts: A lot.	Can you please quote me for the tail fairings? __________________________________________________ GETTING BACK INTO RIDING? Read this.

August 19th, 2012, 08:47 PM	#29
soundsfasterthanitis ninjette.org member Name: Jake Location: SE Wisconsin Join Date: Mar 2012 Motorcycle(s): 2008 Candy Plasma Blue Ninja 250R Posts: 58	Is the clutch cable boot in good shape? How much shipped to 53190?

August 19th, 2012, 08:55 PM	#30
abhijitz ninjette.org sage Name: Abhijit Location: San Francisco Join Date: Nov 2011 Motorcycle(s): Many Two Wheels .. Posts: 611	Wheels and Engine still available? __________________________________________________ [ex-AFM #828 \| SMUSA #828 \| Sponsors : MotionPro \| LeoVince \| Insurrection Racing Gloves \| QstarZ Laptimers + OEM Parts @ 30-40% OFF : Harry @ 1-877-437-1631,17 harry@hondaeasttoledo.com

August 20th, 2012, 07:19 AM	#37
Baddog ninjette.org member Name: Kevin Location: NE PA Join Date: Jun 2012 Motorcycle(s): 04 ZX 6R-636, 06 ZX 10 Posts: 203	I "think" I've replied to everyone. If you messaged me or posted and I haven't replied, please PM me. Thanks folks.

August 20th, 2012, 11:24 AM	#40
Bob2010 ninjette.org sage Name: Bob Location: NY Join Date: Jul 2012 Motorcycle(s): 2010 Ninja 250 2009 Ninja 250 Posts: 730	Let me know if i should PM my question I posted __________________________________________________ 2010 Red Ninja 250 2009 Black Ninja 250 -If you ride like lightning,you're gonna crash like thunder-

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2004 ninja 250, complete part-out	thedrewski86	Motorcycle-related	67	April 24th, 2015 09:29 AM