FS: 2008 Ninja 250 (Black) Complete Part Out - Page 2

Baddog · August 20th, 2012, 11:28 AM

Quote:

Originally Posted by Bob2010

Let me know if i should PM my question I posted

Sorry Bob, I took your initial post to mean that you were checking on this. I'm afraid I'm not that familiar with the body styles of the 250, so perhaps someone here with more experience could assist? I'm just parting the bike out for a bud who isn't that familiar with forums etc and just started college again so has limited time.

Bob2010 · August 20th, 2012, 03:11 PM

It's ok. I'm not an expert as of yet either. I was checking too, but didnt know if yo knew off hand.

walty87 · August 20th, 2012, 03:39 PM

Would you sell the carb vacuum diaphragm seals?
Posted via Mobile Device

Sparkz63 · August 20th, 2012, 10:28 PM

I need a stock kickstand & safety switch, if they're still available.

Also, do you have the clutch safety switch available? I don't need the lever, just the switch.

leed · August 21st, 2012, 04:43 AM

I may take that turn signal/lights switch housing/cluster later on this week.

Baddog · August 21st, 2012, 05:09 AM

Quote:

Originally Posted by walty87

Would you sell the carb vacuum diaphragm seals?
Posted via Mobile Device

Sorry, selling the carbs as a unit.

Baddog · August 21st, 2012, 05:10 AM

Quote:

Originally Posted by Sparkz63

I need a stock kickstand & safety switch, if they're still available.

Also, do you have the clutch safety switch available? I don't need the lever, just the switch.

I have all this stuff yet. I'll get a price and shoot you a PM.

Baddog · August 21st, 2012, 05:11 AM

Quote:

Originally Posted by leed

I may take that turn signal/lights switch housing/cluster later on this week.

Sounds good, just let me know.

Baddog · August 21st, 2012, 05:40 AM

All PM's replied to and posts addressed.

If I missed you, please PM me to get my attention.

Thanks!

Baddog · August 22nd, 2012, 04:24 AM

Quote:

Originally Posted by Ausoi

Do you have the upper fairing stay? And is it bent? I'd be interested if you do.

Sent you a PM with pics

Baddog · August 22nd, 2012, 04:30 AM

Quote:

Originally Posted by Squalo

Could I get pictures of the mirrors. Pm if you would like email.

Cheers

PM Sent

abhijitz · August 22nd, 2012, 06:20 PM

will you sell the tank petcock system separately? If so, how much shipped to 94065 work zipcode

gt_turbo · August 23rd, 2012, 07:25 PM

you got that black plastic piece that goes over the rear tail light? if so pm me a pic and a price shipped to 53225.

Baddog · August 24th, 2012, 06:38 AM

Quote:

Originally Posted by gt_turbo

you got that black plastic piece that goes over the rear tail light? if so pm me a pic and a price shipped to 53225.

Sure do. How does $20 plus shipping sound? I will get you a shipping cost when the wife gets up.

Pics:

gt_turbo · August 24th, 2012, 03:10 PM

Quote:

Originally Posted by Baddog

Sure do. How does $20 plus shipping sound? I will get you a shipping cost when the wife gets up.

looks ok, but brand new from my local dealer is $16. if you can do $10 shipped i'd take it. lmk.

Baddog · August 24th, 2012, 07:02 PM

Quote:

Originally Posted by gt_turbo

looks ok, but brand new from my local dealer is $16. if you can do $10 shipped i'd take it. lmk.

I replied to this last night but it was the wrong part.

Ok, looking at microfische without enough caffeine is bad.

Looking again you are right. I see the part as:

36040H 36040-0063-6Z COVER-TAIL,CNT,F.BLAC 1 $15.88

Let me double check with the wife on shipping and I'll let ya know.

Trailerboy531 · August 24th, 2012, 08:11 PM

Any update on the condition of the forks?

kingkang204 · August 24th, 2012, 09:28 PM

Would you be willing to sell just the spring that actives the rear brake light?

Also is the Shifter Lever still available?

H8tred · August 25th, 2012, 06:20 AM

need the headlight and the center fairing for the headlight,still have them and will you ship to 07747?

jwollam · August 25th, 2012, 05:13 PM

Do you have the toolkit? In particular I'm looking for the tool that adjusts the rear shock out of that kit.

JA-Moo · August 25th, 2012, 10:10 PM

I PMed yesterday about the tool kit, mine didn't have one at all......

Baddog · August 25th, 2012, 10:27 PM

Quote:

Originally Posted by gt_turbo

looks ok, but brand new from my local dealer is $16. if you can do $10 shipped i'd take it. lmk.

Just checked shipping with the wife and that's fine. I'll send you a pm with payment address. Then you will get a tracking # when paid and shipped.

Baddog · August 25th, 2012, 10:37 PM

Quote:

Originally Posted by Trailerboy531

Any update on the condition of the forks?

Left fork looks straight, right fork has a slight bend to it.

I can take more pics of the forks if you like.

Baddog · August 25th, 2012, 10:49 PM

Quote:

Originally Posted by kingkang204

Would you be willing to sell just the spring that actives the rear brake light?

Also is the Shifter Lever still available?

The shift lever was sold already, but I can sell the rear brake switch spring. I can't locate it on Ronayers site (I must be low on caffeine) so what would you offer (plus shipping) for it?

Baddog · August 25th, 2012, 11:07 PM

Quote:

Originally Posted by H8tred

need the headlight and the center fairing for the headlight,still have them and will you ship to 07747?

PM me if interested and I'll send you shipping calculation.

Headlight Assembly: 135.00

Ron Ayers has the upper headlight cowling listed as:
55028 55028-0153-H8 COWLING,UPP,EBONY 1 $191.51

How about $40 plus shipping.

Here is a pic of the damage. Completely repairable. The rest of the fairing is in great condition.

Hunsy34 · August 26th, 2012, 08:58 AM

How much for the left fairing if your willing to sell seperately? PM me

Baddog · August 26th, 2012, 09:17 AM

Quote:

Originally Posted by JA-Moo

I PMed yesterday about the tool kit, mine didn't have one at all......

Sorry bud, I didn't see a PM from you.

Tool kit is in perfect condition and is complete.

OEM Tool Kit on RonAyers.com lists as:
56007 56007-0049 TOOL-KIT 1 $75.99

How about $40 plus shipping?

I don't see any on ebay to gauge a used price, but I think that would be fine.

Baddog · August 26th, 2012, 09:21 AM

Quote:

Originally Posted by Hunsy34

How much for the left fairing if your willing to sell seperately? PM me

Sent you a PM.

Baddog · August 26th, 2012, 09:22 AM

Quote:

Originally Posted by jwollam

Do you have the toolkit? In particular I'm looking for the tool that adjusts the rear shock out of that kit.

Tool kit is in perfect condition and is complete.

OEM Tool Kit on RonAyers.com lists as:
56007 56007-0049 TOOL-KIT 1 $75.99

How about $40 plus shipping?

I don't see any on ebay to gauge a used price, but I think that would be fine. Not parting the toolkit tools out individually.

Baddog · August 26th, 2012, 09:25 AM

Quote:

Originally Posted by abhijitz

will you sell the tank petcock system separately? If so, how much shipped to 94065 work zipcode

Looks like ronayers.com shows this as:

51023 51023-0032 TAP-ASSY,FUEL 1 $62.75 OEM

Perfect working condition. How about $35 plus shipping? PM me if interested

Baddog · August 26th, 2012, 09:32 AM

Quote:

Originally Posted by H8tred

need the headlight and the center fairing for the headlight,still have them and will you ship to 07747?

PM if interested.

is this the part you are looking for?

https://www.ronayers.com/Fiche/TypeI...Group/Cowling_
55028 55028-0153-H8 COWLING,UPP,EBONY 1 $191.51

Will sell for $40 plus shipping.

Easy repair

Headlight Assembly: 135.00 plus shipping.

JA-Moo · August 26th, 2012, 09:42 AM

Quote:

Originally Posted by Baddog

Tool kit is in perfect condition and is complete.

OEM Tool Kit on RonAyers.com lists as:
56007 56007-0049 TOOL-KIT 1 $75.99

How about $40 plus shipping?

I don't see any on ebay to gauge a used price, but I think that would be fine. Not parting the toolkit tools out individually.

I'll take it!

Baddog · August 26th, 2012, 09:47 AM

I think I have all PM's and posts replied to. If you had a question and haven't heard from me, please PM me.

No takers on the engine huh? The thing ran sweet right until the bike was taken apart

jwollam · August 26th, 2012, 01:14 PM

Quote:

Originally Posted by Baddog

Tool kit is in perfect condition and is complete.

OEM Tool Kit on RonAyers.com lists as:
56007 56007-0049 TOOL-KIT 1 $75.99

How about $40 plus shipping?

I don't see any on ebay to gauge a used price, but I think that would be fine. Not parting the toolkit tools out individually.

Sounds like Ja-Moo beat me to it.
Greatly appreciate the offer, if for some reason it doesn't work please let me know.

Thanks!

Trailerboy531 · August 27th, 2012, 01:56 AM

Quote:

Originally Posted by Baddog

Left fork looks straight, right fork has a slight bend to it.

I can take more pics of the forks if you like.

So one is probably straight and one isn't? How's $25 for the set + shipping since I'll have to get one straightened out and the other checked. I highly doubt one fork was bent and the other went on vacation.

Baddog · August 28th, 2012, 04:50 AM

Quote:

Originally Posted by Trailerboy531

So one is probably straight and one isn't? How's $25 for the set + shipping since I'll have to get one straightened out and the other checked. I highly doubt one fork was bent and the other went on vacation.

The right one doesn't appear to be more than a slight bend. the left one does look straight (eyeballin) but I can't be sure.

The bike was endo'd into a field and landed on the tail and then fell on it's side. So the majority of the damage was to the rear subframe. I can take more pics, your call.

I was looking to get $75 plus shipping. Would you meet in the middle at $50 plus shipping? I already have an offer for $40.

Trailerboy531 · August 28th, 2012, 05:56 PM

Let them have it then. It would cost at least $100 to get it straightened as useable. So I'd be looking at $150 for the set minimum.

Baddog · August 28th, 2012, 06:23 PM

Quote:

Originally Posted by Trailerboy531

Let them have it then. It would cost at least $100 to get it straightened as useable. So I'd be looking at $150 for the set minimum.

Fair enough. Thanks.

Baddog · August 31st, 2012, 03:30 AM

All PM's replied to. Thanks folks! Happy Friday!

dccseek · August 31st, 2012, 12:45 PM

Need the shifter Rear set (bracket with footpeg only) Could you do 30 shipped to 78681, it should fit in the usps flat rate for like 6 bucks

August 20th, 2012, 03:11 PM	#42
Bob2010 ninjette.org sage Name: Bob Location: NY Join Date: Jul 2012 Motorcycle(s): 2010 Ninja 250 2009 Ninja 250 Posts: 730	It's ok. I'm not an expert as of yet either. I was checking too, but didnt know if yo knew off hand. __________________________________________________ 2010 Red Ninja 250 2009 Black Ninja 250 -If you ride like lightning,you're gonna crash like thunder-

August 22nd, 2012, 06:20 PM	#52
abhijitz ninjette.org sage Name: Abhijit Location: San Francisco Join Date: Nov 2011 Motorcycle(s): Many Two Wheels .. Posts: 611	will you sell the tank petcock system separately? If so, how much shipped to 94065 work zipcode __________________________________________________ [ex-AFM #828 \| SMUSA #828 \| Sponsors : MotionPro \| LeoVince \| Insurrection Racing Gloves \| QstarZ Laptimers + OEM Parts @ 30-40% OFF : Harry @ 1-877-437-1631,17 harry@hondaeasttoledo.com

August 24th, 2012, 09:28 PM	#58
kingkang204 ninjette.org guru Name: Matthew Location: Washington Join Date: Aug 2010 Motorcycle(s): Bike-less, Can I ride yours? Posts: 318	Would you be willing to sell just the spring that actives the rear brake light? Also is the Shifter Lever still available? __________________________________________________ RR stands for Responsible Riding... Right?

August 25th, 2012, 06:20 AM	#59
H8tred ninjette.org member Name: James Location: matawan Join Date: Aug 2011 Motorcycle(s): ninja 250R Posts: 12	hello need the headlight and the center fairing for the headlight,still have them and will you ship to 07747?

August 31st, 2012, 12:45 PM	#80
dccseek ninjette.org newbie Name: D Location: round rock tx Join Date: Aug 2012 Motorcycle(s): ninja 250 2008 Posts: 6	Need the shifter Rear set (bracket with footpeg only) Could you do 30 shipped to 78681, it should fit in the usps flat rate for like 6 bucks Last futzed with by dccseek; September 1st, 2012 at 12:21 PM.

August 20th, 2012, 03:39 PM	#43
walty87 ninjette.org guru Name: andrew Location: oakdale california Join Date: Nov 2011 Motorcycle(s): 2012 ninja 250 Posts: 296	Would you sell the carb vacuum diaphragm seals? Posted via Mobile Device

August 20th, 2012, 10:28 PM	#44
Sparkz63 ninjette.org member Name: Colton Location: Kentucky Join Date: Apr 2012 Motorcycle(s): '09 Ninja 250r Posts: 16	I need a stock kickstand & safety switch, if they're still available. Also, do you have the clutch safety switch available? I don't need the lever, just the switch.

August 21st, 2012, 04:43 AM	#45
leed ninjette.org sage Name: David Location: Loves Park, IL Join Date: Feb 2011 Motorcycle(s): Time will tell Posts: 969	I may take that turn signal/lights switch housing/cluster later on this week.

August 21st, 2012, 05:40 AM	#49
Baddog ninjette.org member Name: Kevin Location: NE PA Join Date: Jun 2012 Motorcycle(s): 04 ZX 6R-636, 06 ZX 10 Posts: 203	All PM's replied to and posts addressed. If I missed you, please PM me to get my attention. Thanks!

August 23rd, 2012, 07:25 PM	#53
gt_turbo ninjette.org sage Name: L Location: WI Join Date: Apr 2011 Motorcycle(s): '09 250R, '13 CBR500R Posts: 709	you got that black plastic piece that goes over the rear tail light? if so pm me a pic and a price shipped to 53225.

August 24th, 2012, 08:11 PM	#57
Trailerboy531 Gear crash test dummy Name: Max Location: South Bay (So. Cal) Join Date: May 2011 Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r Posts: A lot.	Any update on the condition of the forks?

August 25th, 2012, 05:13 PM	#60
jwollam ninjette.org member Name: John Location: Chico, CA Join Date: Aug 2012 Motorcycle(s): 2008 Ninja 250R Posts: 95	Do you have the toolkit? In particular I'm looking for the tool that adjusts the rear shock out of that kit.

August 25th, 2012, 10:10 PM	#61
JA-Moo ninjette.org member Name: John Location: Rio Rancho Join Date: Aug 2012 Motorcycle(s): many kawasaki 2 stroke triples and a 250R now. Well no more 250R, 2013 300 now Posts: 146	I PMed yesterday about the tool kit, mine didn't have one at all......

August 26th, 2012, 08:58 AM	#66
Hunsy34 ninjette.org member Name: Jason Location: Doylestown, PA Join Date: Feb 2010 Motorcycle(s): 2009 Ninja 250 2016 Ninja 300 1994 KTM 300 EXC Posts: 123	How much for the left fairing if your willing to sell seperately? PM me

August 26th, 2012, 09:47 AM	#73
Baddog ninjette.org member Name: Kevin Location: NE PA Join Date: Jun 2012 Motorcycle(s): 04 ZX 6R-636, 06 ZX 10 Posts: 203	I think I have all PM's and posts replied to. If you had a question and haven't heard from me, please PM me. No takers on the engine huh? The thing ran sweet right until the bike was taken apart

August 28th, 2012, 05:56 PM	#77
Trailerboy531 Gear crash test dummy Name: Max Location: South Bay (So. Cal) Join Date: May 2011 Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r Posts: A lot.	Let them have it then. It would cost at least $100 to get it straightened as useable. So I'd be looking at $150 for the set minimum.

August 31st, 2012, 03:30 AM	#79
Baddog ninjette.org member Name: Kevin Location: NE PA Join Date: Jun 2012 Motorcycle(s): 04 ZX 6R-636, 06 ZX 10 Posts: 203	All PM's replied to. Thanks folks! Happy Friday!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2004 ninja 250, complete part-out	thedrewski86	Motorcycle-related	67	April 24th, 2015 09:29 AM