FS: 2008 Ninja 250 (Black) Complete Part Out - Page 3

Old Guy on a '08 · September 3rd, 2012, 01:53 PM

Kevin,

Interested in the following if you still have them
All four turn signal
Right Side Mirror
Right Side panel that covers the battery ( one screw and friction pops off)
Brake Handle

Looks like some might be sold
Let me know what you still have!

Thanks
Chris - AKA "Old Guy on a '08"

nycsteve · September 8th, 2012, 06:59 AM

OMG, I can't believe I forgot to post here! Sorry about that.

The order was sent in a timely manner. Packaging was great! The parts were exactly as described and seem almost new! Great pricing and just great overall transaction.

You and your wife could run a shipping facility! Good luck with rest of sale!

kjohng · September 10th, 2012, 06:32 AM

Is the frame for sale?

Baddog · September 10th, 2012, 06:38 AM

Quote:

Originally Posted by kjohng

Is the frame for sale?

It is, but the subframe has a bend in it. As the owner didn't want to invest in repairing the bike it wasn't checked out further so it'd be sold "as is".

I've never shipped anything of that size/weight so if you are interested, I'd have to look at freight shipping options. Would you like any specific section additional pictures of the frame?

Baddog · September 10th, 2012, 06:44 AM

Let me check. I know I have the mirror and the side panel yet. I have all 4 turn signals but the front 2 are missing the electrical connector ends as he used them to wire the protons. I can cut them off the protons and send them along if you like.

I believe the brake lever was sold. I'll check and let you know. Wanna PM me a zip code to check shipping costs if interested?

Quote:

Originally Posted by Old Guy on a '08

Kevin,

Interested in the following if you still have them
All four turn signal
Right Side Mirror
Right Side panel that covers the battery ( one screw and friction pops off)
Brake Handle

Looks like some might be sold
Let me know what you still have!

Thanks
Chris - AKA "Old Guy on a '08"

Baddog · September 10th, 2012, 06:45 AM

Quote:

Originally Posted by nycsteve

OMG, I can't believe I forgot to post here! Sorry about that.

The order was sent in a timely manner. Packaging was great! The parts were exactly as described and seem almost new! Great pricing and just great overall transaction.

You and your wife could run a shipping facility! Good luck with rest of sale!

Thanks! She actually has a clothing business so is a real pro at shipping stuff.

Glad yer happy with your stuff.

Baddog · September 11th, 2012, 05:55 AM

Quote:

Originally Posted by dccseek

Need the shifter Rear set (bracket with footpeg only) Could you do 30 shipped to 78681, it should fit in the usps flat rate for like 6 bucks

Sure I can do that. I'll PM you my paypal address if interested.

Baddog · September 11th, 2012, 06:07 AM

Quote:

Originally Posted by kingkang204

Would you be willing to sell just the spring that actives the rear brake light?

Also is the Shifter Lever still available?

I have the shift lever yet. How about $30 plus shipping to your zip code?

PM me if interested and I'll provide you with a quote and a paypal address.

thanks!

kingkang204 · September 11th, 2012, 09:05 AM

Quote:

Originally Posted by Baddog

I have the shift lever yet. How about $30 plus shipping to your zip code?

PM me if interested and I'll provide you with a quote and a paypal address.

thanks!

Sold my ninja. Thanks though!

MrSavvy · September 13th, 2012, 11:26 AM

Radiator $150 shipped to 30907? Paypal of course =)

Baddog · September 13th, 2012, 12:04 PM

Quote:

Originally Posted by MrSavvy

Radiator $150 shipped to 30907? Paypal of course =)

PM'd

Domagoj · September 14th, 2012, 12:17 AM

Both wheels are here!

Thanks for great service and price! And the patience in dealing with overseas shipping!

Baddog · September 14th, 2012, 03:33 AM

Quote:

Originally Posted by Domagoj

Both wheels are here!

Thanks for great service and price! And the patience in dealing with overseas shipping!

Glad to help! Lets see some pics of the bike when she's all back together!

Baddog · September 15th, 2012, 07:29 AM

Quote:

Originally Posted by MrSavvy

Radiator $150 shipped to 30907? Paypal of course =)

I PM'd the other day and followed up today. Still interested?

$160 shipped

MrSavvy · September 15th, 2012, 09:24 PM

Quote:

Originally Posted by Baddog

I PM'd the other day and followed up today. Still interested?

$160 shipped

Replied and just sent the $. Thanks.

Baddog · September 17th, 2012, 05:43 PM

All PM's replied to folks.

Thanks for all the interest!

Still looking for a buyer for the engine. :0

CZroe · September 28th, 2012, 04:51 PM

Quote:

Originally Posted by Baddog

Can you let me know what part number you're looking for? I'm not familiar with the swingarm cap.

http://www.ronayers.com/Fiche/TypeID...roup/Swingarm_

Thanks!

I have the same question. They are usually called "frame caps," as they are stylized plastic caps that cover holes in the frame. The 2008+ bikes have four of them: two small, two large. They are not in the diagram you linked to. The ones we're asking about are the ones that cover the swingarm pivot bolt. In other words, to access the bolt that attaches the swingarm to the frame, you must pull off the round cap to reveal a deep hole in the frame. To remove the swingarm, you must then stick a socket into the frame hole with an extension. No one's asking you to go that far.

These caps come right off with your hand and are often lost accidentally.

Baddog · September 28th, 2012, 05:44 PM

Quote:

Originally Posted by CZroe

I have the same question. They are usually called "frame caps," as they are stylized plastic caps that cover holes in the frame. The 2008+ bikes have four of them: two small, two large. They are not in the diagram you linked to. The ones we're asking about are the ones that cover the swingarm pivot bolt. In other words, to access the bolt that attaches the swingarm to the frame, you must pull off the round cap to reveal a deep hole in the frame. To remove the swingarm, you must then stick a socket into the frame hole with an extension. No one's asking you to go that far.

These caps come right off with your hand and are often lost accidentally.

These were actually sold, but to help answer your question.

There are 4 in total, 2 different part numbers.

You can go to Ron Ayers.com (link below) and look under:
Home » Kawasaki » Motorcycle » 2008 »Ninja » Frame Fittings
http://www.ronayers.com/Fiche/TypeID...rame_Fittings_

The parts in question are:
11065 11065-0262-18T CAP,SWING ARM BRACKET 2 $5.86
11065A 11065-0263-18T CAP,SWING ARM BRACKET 2 $5.86

Hope that helps

CZroe · September 28th, 2012, 09:46 PM

Quote:

Originally Posted by Baddog

These were actually sold, but to help answer your question.

There are 4 in total, 2 different part numbers.

You can go to Ron Ayers.com (link below) and look under:
Home » Kawasaki » Motorcycle » 2008 »Ninja » Frame Fittings
http://www.ronayers.com/Fiche/TypeID...rame_Fittings_

The parts in question are:
11065 11065-0262-18T CAP,SWING ARM BRACKET 2 $5.86
11065A 11065-0263-18T CAP,SWING ARM BRACKET 2 $5.86

Hope that helps

I know. The "same question" was if you had them and how much, and I was too lazy to go look them up on whatever page they were on for actual numbers so I just got really specific instead. Hope you didn't waste too much time doing what I was too lazy to do.

Thanks though!

Baddog · September 29th, 2012, 03:25 AM

Quote:

Originally Posted by CZroe

I know. The "same question" was if you had them and how much, and I was too lazy to go look them up on whatever page they were on for actual numbers so I just got really specific instead. Hope you didn't waste too much time doing what I was too lazy to do.

Thanks though!

Not at all. RonAyers is a very easy to navigate resource. Have a great day.

Baddog · September 30th, 2012, 07:17 AM

Lots of good parts left! All PM's replied to. If I missed you or you haven't heard from me, please PM me.

CZroe · September 30th, 2012, 07:39 AM

I assume the Dunlop GT501 tires have the same 5630 miles that the engine has on it?

They look like they have life left in them, but that's around when I was well past needing a new rear. What is the tread depth?

Baddog · September 30th, 2012, 09:25 AM

Quote:

Originally Posted by CZroe

I assume the Dunlop GT501 tires have the same 5630 miles that the engine has on it?

They look like they have life left in them, but that's around when I was well past needing a new rear. What is the tread depth?

To my knowledge yes, they have the same miles on them. The guy had the bike less than a month when he wrenched it. Tread depth looks good, I took some pics with a penny for reference.

CZroe · September 30th, 2012, 11:57 AM

Thanks. Let me compare that to what I've got and I'll get back to you.

YunMing · October 3rd, 2012, 01:30 AM

I'm looking for a rear shock. PM me on Friday(payday) if you still have it.

Baddog · October 3rd, 2012, 03:01 AM

Quote:

Originally Posted by YunMing

I'm looking for a rear shock. PM me on Friday(payday) if you still have it.

Still have it currently.

YunMing · October 3rd, 2012, 03:10 PM

Quote:

Originally Posted by Baddog

Still have it currently.

How many miles are on it? Also I can do 70 if you pay for shipping.

NevadaWolf · October 3rd, 2012, 03:31 PM

What's the story with the handlebars? I see Clip On's listed in the original break down for 80 each, what is the brand/condition? I'm short with little arms and like to keep as close to stock height as possible.

Baddog · October 4th, 2012, 03:18 PM

Quote:

Originally Posted by NevadaWolf

What's the story with the handlebars? I see Clip On's listed in the original break down for 80 each, what is the brand/condition? I'm short with little arms and like to keep as close to stock height as possible.

These are the OEM clip on's. The right one does have a slight bend to it that could be corrected if you wanted. In the interest of bringing this part out closer to it's end, I'm leaving the throttle tube, grips and bar ends on. If you are interested, PM me with an offer for both and a zip code so I can calculate shipping. I can provide additional pictures if you like.

Right

Left

Baddog · October 4th, 2012, 03:19 PM

Quote:

Originally Posted by YunMing

How many miles are on it? Also I can do 70 if you pay for shipping.

5,600 miles. Same as is on the odometer. To what zip code? They are going for more than $80 on ebay, but again, in the sense of completing this project...

Baddog · October 4th, 2012, 03:22 PM

Quote:

Originally Posted by kjohng

Is the frame for sale?

Any interest in the frame yet?

Baddog · October 4th, 2012, 03:24 PM

Still interested in this?

Quote:

Originally Posted by Baddog

Let me check. I know I have the mirror and the side panel yet. I have all 4 turn signals but the front 2 are missing the electrical connector ends as he used them to wire the protons. I can cut them off the protons and send them along if you like.

I believe the brake lever was sold. I'll check and let you know. Wanna PM me a zip code to check shipping costs if interested?

Quote:

Originally Posted by Old Guy on a '08

Kevin,

Interested in the following if you still have them
All four turn signal
Right Side Mirror
Right Side panel that covers the battery ( one screw and friction pops off)
Brake Handle

Looks like some might be sold
Let me know what you still have!

Thanks
Chris - AKA "Old Guy on a '08"

NevadaWolf · October 4th, 2012, 08:28 PM

Thanks for the pics and info. Unfortunately, life hates me and between yesterday and today my truck decided it was jealous of the attention my bike was getting so it started having issues. ARGH I can't win.

Going to have to pass. :-(

YunMing · October 4th, 2012, 09:01 PM

Quote:

Originally Posted by baddog

5,600 miles. Same as is on the odometer. To what zip code? They are going for more than $80 on ebay, but again, in the sense of completing this project...

95403

Baddog · October 5th, 2012, 03:58 AM

Quote:

Originally Posted by NevadaWolf

Thanks for the pics and info. Unfortunately, life hates me and between yesterday and today my truck decided it was jealous of the attention my bike was getting so it started having issues. ARGH I can't win.

Going to have to pass. :-(

No Worries. Hope the truck is a cheap fix.

Baddog · October 5th, 2012, 04:10 AM

Quote:

Originally Posted by YunMing

95403

It's going to cost $15 just to ship it.

I can do $80 shipped. Let me know if you want it.

YunMing · October 5th, 2012, 11:40 AM

Quote:

Originally Posted by Baddog

It's going to cost $15 just to ship it.

I can do $80 shipped. Let me know if you want it.

80 and you pay for shipping?

Baddog · October 5th, 2012, 11:43 AM

Quote:

Originally Posted by YunMing

80 and you pay for shipping?

That is correct. PM me if you want it and i'll provide you with a paypal address. I will ship once pmt is received.

YunMing · October 5th, 2012, 11:47 AM

pm sent

amsegura · October 5th, 2012, 03:11 PM

You still have the flush mounts and rear tail?

September 3rd, 2012, 01:53 PM	#81
Old Guy on a '08 Chris Name: Chris Location: Charlotte, NC near UNCC Join Date: Aug 2012 Motorcycle(s): BLACK!!! '08 250R Posts: 957	Parts Kevin, Interested in the following if you still have them All four turn signal Right Side Mirror Right Side panel that covers the battery ( one screw and friction pops off) Brake Handle Looks like some might be sold Let me know what you still have! Thanks Chris - AKA "Old Guy on a '08" __________________________________________________ Some roads are too good to waste on four wheels! Riding in a car is like watching a movie... Riding on a motorcycle is like being in one....

September 8th, 2012, 06:59 AM	#82
nycsteve Biker Name: Steve Location: Brooklyn, NY Join Date: Nov 2011 Motorcycle(s): 2010 Ninja 250 SE Posts: 723	OMG, I can't believe I forgot to post here! Sorry about that. The order was sent in a timely manner. Packaging was great! The parts were exactly as described and seem almost new! Great pricing and just great overall transaction. You and your wife could run a shipping facility! Good luck with rest of sale! __________________________________________________ S*** Happens! Design Stuff \| Tumblr James 1:2-4

October 3rd, 2012, 03:31 PM	#108
NevadaWolf Certified looney toon Name: Teri Location: 39°52'40.7"N 118°23'53.8"W (Northern NV) Join Date: Jun 2012 Motorcycle(s): 2012 Ninja 250, 102k+ miles -- 2014 CB500X, 42k+ miles Posts: A lot. Blog Entries: 16 MOTM Jul '13, Jul '14	What's the story with the handlebars? I see Clip On's listed in the original break down for 80 each, what is the brand/condition? I'm short with little arms and like to keep as close to stock height as possible. __________________________________________________ <-- Linky Hey Unregistered! The code [you] shows the username currently logged in. IBA # 56020 AMA # 521481 Fun Rides! ][ My Videos ][ My Gear Hold yourself to the same rules you expect others to follow.

October 4th, 2012, 08:28 PM	#113
NevadaWolf Certified looney toon Name: Teri Location: 39°52'40.7"N 118°23'53.8"W (Northern NV) Join Date: Jun 2012 Motorcycle(s): 2012 Ninja 250, 102k+ miles -- 2014 CB500X, 42k+ miles Posts: A lot. Blog Entries: 16 MOTM Jul '13, Jul '14	Thanks for the pics and info. Unfortunately, life hates me and between yesterday and today my truck decided it was jealous of the attention my bike was getting so it started having issues. ARGH I can't win. Going to have to pass. :-( __________________________________________________ <-- Linky Hey Unregistered! The code [you] shows the username currently logged in. IBA # 56020 AMA # 521481 Fun Rides! ][ My Videos ][ My Gear Hold yourself to the same rules you expect others to follow.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2004 ninja 250, complete part-out	thedrewski86	Motorcycle-related	67	April 24th, 2015 09:29 AM

September 10th, 2012, 06:32 AM	#83
kjohng ninjette.org member Name: Alex Location: Nebraska, USA Join Date: May 2012 Motorcycle(s): 2010 Ninja 250R Posts: 12	Is the frame for sale?

September 13th, 2012, 11:26 AM	#90
MrSavvy ninjette.org member Name: Crash dummy Location: Augusta, GA Join Date: May 2012 Motorcycle(s): 2009 Ninja 250R Posts: 106	Radiator $150 shipped to 30907? Paypal of course =)

September 14th, 2012, 12:17 AM	#92
Domagoj ninjette.org guru Name: Domagoj Location: Rijeka, Croatia Join Date: Aug 2010 Motorcycle(s): Ninja 250r 2009 Posts: 396	Both wheels are here! Thanks for great service and price! And the patience in dealing with overseas shipping!

September 17th, 2012, 05:43 PM	#96
Baddog ninjette.org member Name: Kevin Location: NE PA Join Date: Jun 2012 Motorcycle(s): 04 ZX 6R-636, 06 ZX 10 Posts: 203	All PM's replied to folks. Thanks for all the interest! Still looking for a buyer for the engine. :0

September 30th, 2012, 07:17 AM	#101
Baddog ninjette.org member Name: Kevin Location: NE PA Join Date: Jun 2012 Motorcycle(s): 04 ZX 6R-636, 06 ZX 10 Posts: 203	Lots of good parts left! All PM's replied to. If I missed you or you haven't heard from me, please PM me.

September 30th, 2012, 07:39 AM	#102
CZroe CPT Falcon Name: J.Emmett Turner Location: Newnan, GA Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.	I assume the Dunlop GT501 tires have the same 5630 miles that the engine has on it? They look like they have life left in them, but that's around when I was well past needing a new rear. What is the tread depth?

September 30th, 2012, 11:57 AM	#104
CZroe CPT Falcon Name: J.Emmett Turner Location: Newnan, GA Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.	Thanks. Let me compare that to what I've got and I'll get back to you.

October 3rd, 2012, 01:30 AM	#105
YunMing ninjette.org member Name: Alexander Location: Santa Rosa Join Date: Jul 2012 Motorcycle(s): (Sold) 2007 Red Ninja 250r, 2003 Cbr 600 F4i Posts: 137	I'm looking for a rear shock. PM me on Friday(payday) if you still have it.

October 5th, 2012, 11:47 AM	#119
YunMing ninjette.org member Name: Alexander Location: Santa Rosa Join Date: Jul 2012 Motorcycle(s): (Sold) 2007 Red Ninja 250r, 2003 Cbr 600 F4i Posts: 137	pm sent

October 5th, 2012, 03:11 PM	#120
amsegura ninjette.org member Name: Alex Location: West Hollywood, CA Join Date: Apr 2012 Motorcycle(s): 2009 Ninja 250, 2003 WR350 Posts: 62	You still have the flush mounts and rear tail?