FS: 2008 Ninja 250 (Black) Complete Part Out - Page 5

Baddog · November 20th, 2012, 10:20 AM

All PM's replied to.

Still have most of the body parts, tank and lock sets left.

Seats, headlight assy and instrument cluster in minty condition along with a perfect engine with low miles.

dvannoy · November 22nd, 2012, 07:16 PM

Tool kit? Specifically the spanner wrench to adjust the rear shock.

Baddog · November 22nd, 2012, 07:44 PM

Quote:

Originally Posted by dvannoy

Tool kit? Specifically the spanner wrench to adjust the rear shock.

Sorry, Already sold

dvannoy · November 23rd, 2012, 05:44 PM

No problem thanks anyway

EternalNewb · November 25th, 2012, 07:32 PM

Cowling and fairings? Or even just the left and right fairings? Shifter lever? Seat cowl?

Baddog · November 27th, 2012, 11:55 AM

Quote:

Originally Posted by EternalNewb

Cowling and fairings? Or even just the left and right fairings? Shifter lever? Seat cowl?

Shift lever was sold and no solo cowl.

The left is completely undamaged at all (normal wear n tear), the right is in good shape. The only damage is on the top portion where it has some scratching and 2 small (1 inchish) cracks that could be easily repaired.

Here's the link to all the pics. Let me know if you are interested and I'll pickup some shipping boxes and get you a shipping cost. How about $200 for the fairings plus shipping?

abhijitz · November 27th, 2012, 12:18 PM

Do you have a 08+ rear brake master cylinder ?

EternalNewb · November 27th, 2012, 01:42 PM

Quote:

Originally Posted by Baddog

Shift lever was sold and no solo cowl.

The left is completely undamaged at all (normal wear n tear), the right is in good shape. The only damage is on the top portion where it has some scratching and 2 small (1 inchish) cracks that could be easily repaired.

Here's the link to all the pics. Let me know if you are interested and I'll pickup some shipping boxes and get you a shipping cost. How about $200 for the fairings plus shipping?

Still interested in these fairings. Also, do you have the exterior plastics for the headlight? Condition and price if included with the fairings?

Baddog · November 29th, 2012, 07:46 AM

Quote:

Originally Posted by abhijitz

Do you have a 08+ rear brake master cylinder ?

I do. I have the reservoir, tube, MC and pedal mount hardware.

PM me an offer plus shipping.

Baddog · November 29th, 2012, 07:53 AM

Quote:

Originally Posted by EternalNewb

Still interested in these fairings. Also, do you have the exterior plastics for the headlight? Condition and price if included with the fairings?

I do have this yet. It is on good condition but has some minor damage.

PM me an offer plus shipping for all of it if interested and I'll find boxes and get a shipping quote.

You can check out all the pics here:
http://s488.beta.photobucket.com/use...2008_Ninja_250

skilletmo · December 1st, 2012, 04:26 PM

Do you still have the stock Links for the suspension? I have a lowering kit that i don't need from previous owner and want to put it back to normal height.

see:
http://www.ninjette.org/forums/showt...905#post608905

Baddog · December 2nd, 2012, 09:36 AM

Quote:

Originally Posted by skilletmo

Do you still have the stock Links for the suspension? I have a lowering kit that i don't need from previous owner and want to put it back to normal height.

see:
http://www.ninjette.org/forums/showt...905#post608905

I do. Shoot me a PM with a reasonable offer and your shipping address so I can calculate shipping costs.

Folks, I'll be posting up an update shortly with an OBO for whats left. Still can't believe nobody's jumped at that engine. Perfect shape and LOW miles.

skilletmo · December 2nd, 2012, 08:45 PM

Sorry a few hours after sending that Motofool showed me some on eBay for 11.99 shipped free! Thanks anyways. Ill be sure to hit you up whenever i get some money for some other parts that i need, but atm i need to prioritize my financial status lol

Baddog · December 3rd, 2012, 06:24 AM

Quote:

Originally Posted by skilletmo

Sorry a few hours after sending that Motofool showed me some on eBay for 11.99 shipped free! Thanks anyways. Ill be sure to hit you up whenever i get some money for some other parts that i need, but atm i need to prioritize my financial status lol

Works for me.

NevadaWolf · December 6th, 2012, 07:46 AM

Long shot, but do you happen to have the left and right switch housings still?

Baddog · December 6th, 2012, 07:55 AM

Quote:

Originally Posted by NevadaWolf

Long shot, but do you happen to have the left and right switch housings still?

you're only half out of luck.

I have the left one. undamaged, great condition.

PM me an offer for the part and a mailing address so I can calculate shipping. Can go out in todays mail yet if you like.

Baddog · December 31st, 2012, 07:59 AM

Still have some great condition parts leftover. instrument cluster, carbs and some body parts are in great shape yet. PM me an offer!

drunyon · January 2nd, 2013, 11:15 AM

So you have the carbs left? Are they stock?
Interested.
Thanks

Baddog · January 2nd, 2013, 11:18 AM

Quote:

Originally Posted by drunyon

So you have the carbs left? Are they stock?
Interested.
Thanks

Yep, still have them. They are OEM and in great shape. I'm just trying to get the rest of the parts cleared out for my bud so feel free to PM me an offer if interested. include your shipping address so I can calculate shipping.

Thanks!

Cheapninja · January 6th, 2013, 05:07 PM

Been awhile since I was on, was out on detachment. Do you still have the left rear fairing, and possibly a left handle bar?

Baddog · January 8th, 2013, 07:28 AM

Quote:

Originally Posted by Cheapninja

Been awhile since I was on, was out on detachment. Do you still have the left rear fairing, and possibly a left handle bar?

Sorry for the delay, I had to double check that I had them yet. I do in fact have both pieces. Feel free to PM me your zip code for shipping estimates and give me a reasonable offer for the parts.

Thanks!

lastcyclone · January 8th, 2013, 02:56 PM

I'm looking for both side fairings, cowl, front fender,rear set (both sides) front turn signals, right mirror (or just the glass part).
Maybe? Yes?
Thanks.

lastcyclone · January 8th, 2013, 03:11 PM

Reccommendation for the biggest discounter on OEM items.
And what is the difference between 250R and 250RA models. Was there an ABS option then?

CZroe · January 8th, 2013, 03:23 PM

Quote:

Originally Posted by lastcyclone

Reccommendation for the biggest discounter on OEM items.
And what is the difference between 250R and 250RA models. Was there an ABS option then?

"250R" isn't a model name. It's a marketing name. The model is something like "EX250JAF" or "EX250JAFA." My guess is you are looking at something that is referencing the 50-state and 49-state variants.

In the two model numbers above:

J is the generation designation within a model series. It was F for the previous generation, K for Fuel Injection, and L for 2013+ 250.
The first A is the year 2010. It was 9 before that and B after.
Not sure what the F designates. US/carb model without the city light in the Asian models or the gearing of the Australian model?
The second A, when present, is only there to differentiate the US California "50 state" model with the extra emission stuff.

Baddog · January 9th, 2013, 06:23 PM

Quote:

Originally Posted by lastcyclone

I'm looking for both side fairings, cowl, front fender,rear set (both sides) front turn signals, right mirror (or just the glass part).
Maybe? Yes?
Thanks.

I still have the following:

both side fairings, cowl, front fender

Please make sure you check out the photobucket link to view the parts. The right side was scraped up but the left side is perfect (normal wear/tear)

lastcyclone · January 10th, 2013, 05:46 AM

Hi Kevin,
I checked your photos and sent a PM. Thanks.
Thanks for the info. on the model number specifics. I would guess, the extra digit would be the CA model. Is there additional emissions equip. on that maybe?

xaple · January 12th, 2013, 12:36 AM

i want this stay http://s488.beta.photobucket.com/use...ml?sort=3&o=16

How much?

Also i cant tell if your right mirror is broken. If not i would purchase it with the stay

lastcyclone · January 12th, 2013, 07:13 PM

$40 for both foot peg assemblies? Plus shipping. Is the right peg gone?
Need all the parts for the rear brake from the bracket and pedal up to brake line as well. Also looking for a right mirror and front turn signals.
Sent PM. Thanks
paulhmartinez@live.com

Baddog · January 16th, 2013, 05:33 AM

All PM's replied, thanks folks!

Baddog · January 16th, 2013, 05:34 AM

Quote:

Originally Posted by lastcyclone

$40 for both foot peg assemblies? Plus shipping. Is the right peg gone?
Need all the parts for the rear brake from the bracket and pedal up to brake line as well. Also looking for a right mirror and front turn signals.
Sent PM. Thanks
paulhmartinez@live.com

I might have some of these parts yet. I'll have to check today and let you know. I'll update you via PM.

lastcyclone · January 16th, 2013, 09:48 AM

Hi, I haven't hear from anyone. paulhmartinez@live.com
Still need parts, thanks.

Baddog · January 23rd, 2013, 10:00 AM

All emails and PM's replied to.

Open to offers on parts I have left.

Don't forget an engine in perfect condition!

Baddog · January 24th, 2013, 06:18 AM

All PM's from yesterday replied to.

CZroe · January 24th, 2013, 01:32 PM

Which fork is seemingly straight? Left or right?

Baddog · January 29th, 2013, 05:48 PM

Quote:

Originally Posted by CZroe

Which fork is seemingly straight? Left or right?

The left one. The right one doesn't look horribly bad but it somewhat off. If yer interested in just one or both I'm open to offers plus shipping.

Sorry for the delay.

CZroe · January 29th, 2013, 09:21 PM

Quote:

Originally Posted by Baddog

The left one. The right one doesn't look horribly bad but it somewhat off. If yer interested in just one or both I'm open to offers plus shipping.

Sorry for the delay.

No problem. I actually already purchased some bent ones that I'm looking into repairing but I don't yet know if it's feasible.

Do you have pics of the bend to determine if it's repairable? If there is a crease it's usually right under the lower triple clamp on the back side and will be visible when dropped a little bit.

lastcyclone · January 30th, 2013, 04:24 AM

I will take the right fairing. Let me know how. Thanks. $40 plus shipping?

Baddog · January 30th, 2013, 01:11 PM

Quote:

Originally Posted by CZroe

No problem. I actually already purchased some bent ones that I'm looking into repairing but I don't yet know if it's feasible.

Do you have pics of the bend to determine if it's repairable? If there is a crease it's usually right under the lower triple clamp on the back side and will be visible when dropped a little bit.

I had to look REALLY hard to determine which one was bent. The one that is not straight is only off by a few degrees. There are no creases on any of the tube extension at all. The rider rode the bike home 2+ hours with no issues in steering/handling. I can't imagine it would need that much effort to make true again.

Baddog · January 30th, 2013, 01:17 PM

Quote:

Originally Posted by lastcyclone

I will take the right fairing. Let me know how. Thanks. $40 plus shipping?

Sure thing. Can you PM me a shipping address so I can calculate shipping?

Baddog · January 30th, 2013, 01:40 PM

All PM's replied to.

Still have most of the body parts (right fairing sold), tank and lock sets left.

Seats, windscreen and instrument cluster in minty condition along with a perfect engine with low miles.

November 27th, 2012, 12:18 PM	#167
abhijitz ninjette.org sage Name: Abhijit Location: San Francisco Join Date: Nov 2011 Motorcycle(s): Many Two Wheels .. Posts: 611	Do you have a 08+ rear brake master cylinder ? __________________________________________________ [ex-AFM #828 \| SMUSA #828 \| Sponsors : MotionPro \| LeoVince \| Insurrection Racing Gloves \| QstarZ Laptimers + OEM Parts @ 30-40% OFF : Harry @ 1-877-437-1631,17 harry@hondaeasttoledo.com

December 1st, 2012, 04:26 PM	#171
skilletmo InfoWhore Name: Melashi Location: 75081 Join Date: Oct 2012 Motorcycle(s): 2008 Ninja 250 StreetFighter ~~~~ 2005 KTM 450 EXC Posts: 628	Do you still have the stock Links for the suspension? I have a lowering kit that i don't need from previous owner and want to put it back to normal height. see: http://www.ninjette.org/forums/showt...905#post608905 __________________________________________________ Everyone, go buy a dirtbike hurry

December 2nd, 2012, 08:45 PM	#173
skilletmo InfoWhore Name: Melashi Location: 75081 Join Date: Oct 2012 Motorcycle(s): 2008 Ninja 250 StreetFighter ~~~~ 2005 KTM 450 EXC Posts: 628	Sorry a few hours after sending that Motofool showed me some on eBay for 11.99 shipped free! Thanks anyways. Ill be sure to hit you up whenever i get some money for some other parts that i need, but atm i need to prioritize my financial status lol __________________________________________________ Everyone, go buy a dirtbike hurry

December 6th, 2012, 07:46 AM	#175
NevadaWolf Certified looney toon Name: Teri Location: 39°52'40.7"N 118°23'53.8"W (Northern NV) Join Date: Jun 2012 Motorcycle(s): 2012 Ninja 250, 102k+ miles -- 2014 CB500X, 42k+ miles Posts: A lot. Blog Entries: 16 MOTM Jul '13, Jul '14	Long shot, but do you happen to have the left and right switch housings still? __________________________________________________ <-- Linky Hey Unregistered! The code [you] shows the username currently logged in. IBA # 56020 AMA # 521481 Fun Rides! ][ My Videos ][ My Gear Hold yourself to the same rules you expect others to follow.

January 8th, 2013, 02:56 PM	#182
lastcyclone ninjette.org member Name: Paul Location: Lockport Join Date: Jan 2013 Motorcycle(s): 09 EX 250R 07 Buell XB12X 08 Zuma 50 08 CRF150F Posts: 22	What's left? I'm looking for both side fairings, cowl, front fender,rear set (both sides) front turn signals, right mirror (or just the glass part). Maybe? Yes? Thanks.

November 20th, 2012, 10:20 AM	#161
Baddog ninjette.org member Name: Kevin Location: NE PA Join Date: Jun 2012 Motorcycle(s): 04 ZX 6R-636, 06 ZX 10 Posts: 203	All PM's replied to. Still have most of the body parts, tank and lock sets left. Seats, headlight assy and instrument cluster in minty condition along with a perfect engine with low miles.

November 22nd, 2012, 07:16 PM	#162
dvannoy ninjette.org member Name: Darren Location: 386, FL Join Date: Aug 2012 Motorcycle(s): 07 Ninja 250 Posts: 40	Tool kit? Specifically the spanner wrench to adjust the rear shock.

November 23rd, 2012, 05:44 PM	#164
dvannoy ninjette.org member Name: Darren Location: 386, FL Join Date: Aug 2012 Motorcycle(s): 07 Ninja 250 Posts: 40	No problem thanks anyway

November 25th, 2012, 07:32 PM	#165
EternalNewb ninjette.org certified postwhore Name: S Location: CA/MA, usually Join Date: Nov 2012 Motorcycle(s): 2012 Ninja 250R, 2007 Ninja 650R, 2001 F650 Dakar Posts: A lot.	Cowling and fairings? Or even just the left and right fairings? Shifter lever? Seat cowl?

December 31st, 2012, 07:59 AM	#177
Baddog ninjette.org member Name: Kevin Location: NE PA Join Date: Jun 2012 Motorcycle(s): 04 ZX 6R-636, 06 ZX 10 Posts: 203	Still have some great condition parts leftover. instrument cluster, carbs and some body parts are in great shape yet. PM me an offer!

January 2nd, 2013, 11:15 AM	#178
drunyon ninjette.org member Name: David Location: Mascoutah IL Join Date: Nov 2012 Motorcycle(s): 2010 Ninja 250 Posts: 112	So you have the carbs left? Are they stock? Interested. Thanks

January 6th, 2013, 05:07 PM	#180
Cheapninja ninjette.org newbie Name: Tim Location: California Join Date: Aug 2012 Motorcycle(s): 08 Ninja 250r Posts: 2	Been awhile since I was on, was out on detachment. Do you still have the left rear fairing, and possibly a left handle bar?

January 8th, 2013, 03:11 PM	#183
lastcyclone ninjette.org member Name: Paul Location: Lockport Join Date: Jan 2013 Motorcycle(s): 09 EX 250R 07 Buell XB12X 08 Zuma 50 08 CRF150F Posts: 22	One last thing today. Reccommendation for the biggest discounter on OEM items. And what is the difference between 250R and 250RA models. Was there an ABS option then?

January 10th, 2013, 05:46 AM	#186
lastcyclone ninjette.org member Name: Paul Location: Lockport Join Date: Jan 2013 Motorcycle(s): 09 EX 250R 07 Buell XB12X 08 Zuma 50 08 CRF150F Posts: 22	Nice parts Hi Kevin, I checked your photos and sent a PM. Thanks. Thanks for the info. on the model number specifics. I would guess, the extra digit would be the CA model. Is there additional emissions equip. on that maybe?

January 12th, 2013, 12:36 AM	#187
xaple ninjette.org guru Name: Daniel "God" Location: South Florida Join Date: Aug 2012 Motorcycle(s): Ninja 250 Posts: 326	i want this stay http://s488.beta.photobucket.com/use...ml?sort=3&o=16 How much? Also i cant tell if your right mirror is broken. If not i would purchase it with the stay

January 12th, 2013, 07:13 PM	#188
lastcyclone ninjette.org member Name: Paul Location: Lockport Join Date: Jan 2013 Motorcycle(s): 09 EX 250R 07 Buell XB12X 08 Zuma 50 08 CRF150F Posts: 22	Parts $40 for both foot peg assemblies? Plus shipping. Is the right peg gone? Need all the parts for the rear brake from the bracket and pedal up to brake line as well. Also looking for a right mirror and front turn signals. Sent PM. Thanks paulhmartinez@live.com

January 16th, 2013, 05:33 AM	#189
Baddog ninjette.org member Name: Kevin Location: NE PA Join Date: Jun 2012 Motorcycle(s): 04 ZX 6R-636, 06 ZX 10 Posts: 203	All PM's replied, thanks folks!

January 16th, 2013, 09:48 AM	#191
lastcyclone ninjette.org member Name: Paul Location: Lockport Join Date: Jan 2013 Motorcycle(s): 09 EX 250R 07 Buell XB12X 08 Zuma 50 08 CRF150F Posts: 22	Parts Hi, I haven't hear from anyone. paulhmartinez@live.com Still need parts, thanks.

January 23rd, 2013, 10:00 AM	#192
Baddog ninjette.org member Name: Kevin Location: NE PA Join Date: Jun 2012 Motorcycle(s): 04 ZX 6R-636, 06 ZX 10 Posts: 203	All emails and PM's replied to. Open to offers on parts I have left. Don't forget an engine in perfect condition!

January 24th, 2013, 06:18 AM	#193
Baddog ninjette.org member Name: Kevin Location: NE PA Join Date: Jun 2012 Motorcycle(s): 04 ZX 6R-636, 06 ZX 10 Posts: 203	All PM's from yesterday replied to.

January 24th, 2013, 01:32 PM	#194
CZroe CPT Falcon Name: J.Emmett Turner Location: Newnan, GA Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.	Which fork is seemingly straight? Left or right?

January 30th, 2013, 04:24 AM	#197
lastcyclone ninjette.org member Name: Paul Location: Lockport Join Date: Jan 2013 Motorcycle(s): 09 EX 250R 07 Buell XB12X 08 Zuma 50 08 CRF150F Posts: 22	Parts Still Needed I will take the right fairing. Let me know how. Thanks. $40 plus shipping?

January 30th, 2013, 01:40 PM	#200
Baddog ninjette.org member Name: Kevin Location: NE PA Join Date: Jun 2012 Motorcycle(s): 04 ZX 6R-636, 06 ZX 10 Posts: 203	All PM's replied to. Still have most of the body parts (right fairing sold), tank and lock sets left. Seats, windscreen and instrument cluster in minty condition along with a perfect engine with low miles.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2004 ninja 250, complete part-out	thedrewski86	Motorcycle-related	67	April 24th, 2015 09:29 AM