Area P - GB (for the new-gen 250!) Runs through February 28.

kbryant · January 31st, 2013, 12:45 PM

The Area P GB is offered for both 250 and 300 models and is available exclusively to ninjette.org members only. Member David White ("diwhiteii") has volunteered to assist with administrating the GB threads on both forums.

It won’t be based on quantity or minimums. It won’t be based on one particular style system. You can drop out without any drama if you change your mind. Payments are not required until the GB ends and we actually begin assembling/shipping orders.

In addition - If we reach orders for 10+ systems on the 250 - at the conclusion of the GB and after all the orders are assembled/shipped –– those names will get “dropped into a hat”. Alex will then pull one name out and that person will get their exhaust system purchase price refunded!

We’ll do the same offer for the 300 GB if we reach 10+ systems!

The 250 GB will run until the end of February (28th) 2013. At the conclusion, order processing will commence.

The 300 GB will run until the end of March (31st) 2013. (link to 300 group buy thread) The reason for leaving this one open longer, is simply we are still working on the Tooling/Fixtures. Exhaust Systems are not yet available. Our systems are very complex and unique in design. They share nothing in common with the 250. Therefore, all new Tooling/Fixtures are required and must meet our high standards of precision. Currently we are projecting the first article production systems to be ready for check-fit in Mid-March. Production systems will follow directly after and are projected to be available end of March. If any unforeseen delays in production are experienced, we will still honor the intro GB pricing, provided your name was on the original list at its conclusion (March 31, 2013). And of course you are under no obligation and are free to drop out at any time.

*So what’s the deal? -

For the 250 - $50.00 off any system. $75.00 off when you purchase a system and Jet kit.

For the 300 - $75.00 off any system. $100.00 off when you purchase a system and FI Micro Programmer.

(link to 300 group buy thread)

*Limit one order per member. No dealers.

csmith12 · January 31st, 2013, 12:51 PM

Subbed & perfect timing Kerry. I need a race exhaust.

Ninja Chris · February 3rd, 2013, 01:03 AM

Woohooo! I was hoping a GB would come around again

joshuatrueanderson · February 3rd, 2013, 07:24 PM

yeah im in for one

kbryant · February 9th, 2013, 04:18 PM

GB officially open.

Jiggles · February 9th, 2013, 07:13 PM

I should pick up a second in case I crash

allanoue · February 9th, 2013, 07:16 PM

Quote:

Originally Posted by jiggles

i should pick up a second for when i crash

ftfy

Trailerboy531 · February 9th, 2013, 07:25 PM

@menikmatl - cream yourself sir.

Love this system. Literally the best part of my bike and the gains are noticeable. The sound is perfect, not too loud but lots of grunt; and the look is beautiful. Kerry is nothing less than an absolute pleasure to deal with. Everybody get on this.

csmith12 · February 9th, 2013, 07:30 PM

I am gunna pull this off, you can go ahead and add me now. Just gotta save a few more pennies.

diwhiteii · February 9th, 2013, 08:05 PM

Hello to All,

I am David White and am the one assisting with administration of the GB threads on both forums. Feel free to direct your questions to me about the group buy and I make sure to get back with you as soon as possible. Please try to keep your questions inline with the group buy so I can keep accurate data on the number of people interested. I am very knowledgable about the Ninja 250R & 300, so I should be able to answer your question, if not I will contact Kerry to get you the right answer. I am ready to start taking names, so get those tax returns ready!

diwhiteii · February 9th, 2013, 08:13 PM

So far I have two on the list.

1.joshuatrueanderson
2.csmith12

Any others?

CThunder-blue · February 9th, 2013, 11:52 PM

@Alex should probably move this to the Classifieds section.

Good luck with the GB!

psych0hans · February 10th, 2013, 01:32 AM

How much would this cost me and would you ship to india? Do I get a Special discount because I'm Indian and thus a cheap b***ard by nature? Do you have PCV maps for this? Can I get it in return for sexual favours?are the bike and the dyno standard equipment?

P.s. yes, I am a certified asshole...

xaple · February 10th, 2013, 01:44 AM

What is a GB?

psych0hans · February 10th, 2013, 01:54 AM

Quote:

Originally Posted by xaple

What is a GB?

GB = group buy... I.e. discounted prices because a bigger order is expected.

TheDementedDrummer · February 10th, 2013, 08:21 AM

Group Buy, i'm guessing

Trailerboy531 · February 10th, 2013, 10:21 AM

Quote:

Originally Posted by psych0hans

How much would this cost me and would you ship to india? Do I get a Special discount because I'm Indian and thus a cheap b***ard by nature? Do you have PCV maps for this? Can I get it in return for sexual favours?are the bike and the dyno standard equipment?

P.s. yes, I am a certified asshole...

That's my bike... She used to be so pretty

psych0hans · February 10th, 2013, 11:21 AM

Quote:

Originally Posted by Trailerboy531

That's my bike... She used to be so pretty

She really is pretty... How was the exhaust?

menikmati · February 10th, 2013, 11:49 AM

Quote:

Originally Posted by Trailerboy531

@menikmatl - cream yourself sir.

Love this system. Literally the best part of my bike and the gains are noticeable. The sound is perfect, not too loud but lots of grunt; and the look is beautiful. Kerry is nothing less than an absolute pleasure to deal with. Everybody get on this.

@Trailerboy531

I got dat pipe in late September, now I'm working towards a Dainese suit. Damn you, Max, damn youuuuuuuuu.

Good to see a lot of interest in this GB, Area-P has been a pleasure to deal with.

Trailerboy531 · February 10th, 2013, 12:35 PM

Quote:

Originally Posted by menikmati

@Trailerboy531

I got dat pipe in late September, now I'm working towards a Dainese suit. Damn you, Max, damn youuuuuuuuu.

Good to see a lot of interest in this GB, Area-P has been a pleasure to deal with.

Keep an eye out for used, I've seen my same model of suit in basically brand new condition go for...much less than I paid. Also it crashes well

Trailerboy531 · February 10th, 2013, 12:37 PM

Quote:

Originally Posted by psych0hans

She really is pretty... How was the exhaust?

She's not that pretty anymore, that picture always depresses me haha. I have nothing but overwhelmingly positive things to say about that pipe, Area P, and Kerry Bryant.

diwhiteii · February 10th, 2013, 12:52 PM

Quote:

Originally Posted by xaple

What is a GB?

Group Buy

diwhiteii · February 10th, 2013, 01:10 PM

Quote:

Originally Posted by psych0hans

How much would this cost me and would you ship to india? Do I get a Special discount because I'm Indian and thus a cheap b***ard by nature? Do you have PCV maps for this? Can I get it in return for sexual favours?are the bike and the dyno standard equipment?

P.s. yes, I am a certified asshole...

Hello Hans,

Area P ships worldwide and shipping to India would be about $110. Area P does have a few maps for the PCV that they developed for a customer years ago with a 250 FI model. This thread is used for professional logging of peoples request so please leave out the favours. I thank you and hope we can get the exhaust you need. Do you want me to add you to the list?

rc-rick · February 12th, 2013, 09:57 PM

@diwhiteii, what is the difference with the 4 full race exhausts? I am interested in the buy but not sure which one.

Alex · February 12th, 2013, 10:02 PM

/moved thread to marketplace, clarified title for the 250, added links to the related 300 group buy thread

mikecronis · February 12th, 2013, 11:17 PM

I'm in. Do you know if that comes with free shipping to CONUS (continental United States)? Maybe you could ask/finagle it with them?

diwhiteii · February 13th, 2013, 10:30 AM

Quote:

Originally Posted by rc-rick

@diwhiteii, what is the difference with the 4 full race exhausts? I am interested in the buy but not sure which one.

Here is the link to there website:

http://www.areapnolimits.com/product...-Race-2008.php

If you want the most power go with the Area P Mid-High Mount Race System with 18" Muffler. Otherwise pick which style you like better.

diwhiteii · February 13th, 2013, 10:39 AM

Quote:

Originally Posted by mikecronis

I'm in. Do you know if that comes with free shipping to CONUS (continental United States)? Maybe you could ask/finagle it with them?

Prices are already discounted well below retail so shipping won't be free, but is only $19.50 within the lower 48 states.

diwhiteii · February 13th, 2013, 10:40 AM

1.joshuatrueanderson
2.csmith12
3.mikecronis

joshuatrueanderson · February 13th, 2013, 02:17 PM

decided to roll with the 12" race system carbon fiber muffler with Flat Conical Billet End Cap + custom Area p jet kit + exhaust hanger bracket (black). cant wait to get it all tuned up.

Jiggles · February 13th, 2013, 02:50 PM

Quote:

Originally Posted by joshuatrueanderson

decided to roll with the 12" race system carbon fiber muffler with Flat Conical Billet End Cap + custom Area p jet kit + exhaust hanger bracket (black). cant wait to get it all tuned up.

But the 18 makes your bike go faster!

akima · February 13th, 2013, 03:33 PM

Count me in! It's my birthday this month so I'll treat myself

I want the full stainless steel mid-high mount race system with 18" Carbon Fiber Muffler.

I will be installing this on a British ninja 250R, so besides its funny accent it also has fuel injection. Do you guys have the maps I need to install in a power commander?

Also: I guess I'll need a new airbox/filter to go with this exhaust. Can you recommend one? Are there any other changes I should make to the bike to make the most of this exhaust?

Also: how much will it cost to ship to England?

This is going to be an expensive upgrade!

joshuatrueanderson · February 13th, 2013, 03:43 PM

Quote:

But the 18 makes your bike go faster!

im afraid of length.. 18 seems so loong..... really that big of a difference in gains? if its worth it id change my mind.

Jiggles · February 13th, 2013, 03:58 PM

Quote:

Originally Posted by joshuatrueanderson

im afraid of length.. 18 seems so loong..... really that big of a difference in gains? if its worth it id change my mind.

What are you afraid of the length for? I believe the 18 was making somewhere around 0.5-1hp more but the really nice thing about it is that it sounds so sexy without being obnoxiously loud

Quote:

Originally Posted by akima

Count me in! It's my birthday this month so I'll treat myself

I want the full stainless steel mid-high mount race system with 18" Carbon Fiber Muffler.

I will be installing this on a British ninja 250R, so besides its funny accent it also has fuel injection. Do you guys have the maps I need to install in a power commander?

Also: I guess I'll need a new airbox/filter to go with this exhaust. Can you recommend one? Are there any other changes I should make to the bike to make the most of this exhaust?

Also: how much will it cost to ship to England?

This is going to be an expensive upgrade!

Welcome to the dark side akima! For the airbox you may just want to remove the snorkel and possible change the filter. If you want more airflow than that but don't want to do pod filters you can also drill your airbox like @choneofakind did

choneofakind · February 13th, 2013, 04:22 PM

Quote:

Originally Posted by Jiggles

Welcome to the dark side akima! For the airbox you may just want to remove the snorkel and possible change the filter. If you want more airflow than that but don't want to do pod filters you can also drill your airbox like @choneofakind did

...or she could just remove the snorkel. The pregen and newgen have different airboxes Sean

lgk · February 13th, 2013, 04:23 PM

Quote:

Originally Posted by joshuatrueanderson

im afraid of length.. 18 seems so loong..... really that big of a difference in gains? if its worth it id change my mind.

what are you concerned about?

joshuatrueanderson · February 13th, 2013, 04:25 PM

i wanted short cuz i wanted the mgp growler.SOUND SO SICK.... no im kidding... the 18 is the way to go. Just looked a little too stock for my liking, but on this little 250, ill sip out any hp's i can get. Area p is the ****!

lgk · February 13th, 2013, 04:27 PM

Quote:

Originally Posted by akima

I want the full stainless steel mid-high mount race system with 18" Carbon Fiber Muffler.

I will be installing this on a British ninja 250R, so besides its funny accent it also has fuel injection. Do you guys have the maps I need to install in a power commander?

Also: I guess I'll need a new airbox/filter to go with this exhaust. Can you recommend one? Are there any other changes I should make to the bike to make the most of this exhaust?

i would remove the snorkel and schedule some dyno runs, so the AFR is tuned perfectly.

choneofakind · February 13th, 2013, 04:31 PM

Quote:

Originally Posted by akima

I will be installing this on a British ninja 250R, so besides its funny accent it also has fuel injection. Do you guys have the maps I need to install in a power commander?

If Kerry doesn't have maps, you can start with the maps from Yoshi for their system. I believe they have 2 maps; 1 w/snorkel and 1 for w/o the snorkel.

That would be a good starting place for a shop with a dyno. Heck, it might even be right and feel perfect. Never know.

Jiggles · February 13th, 2013, 04:31 PM

Quote:

Originally Posted by choneofakind

...or she could just remove the snorkel. The pregen and newgen have different airboxes Sean

Close enough!

Quote:

Originally Posted by joshuatrueanderson

i wanted short cuz i wanted the mgp growler.SOUND SO SICK.... no im kidding... the 18 is the way to go. Just looked a little too stock for my liking, but on this little 250, ill sip out any hp's i can get. Area p is the ****!

I think it looks good

January 31st, 2013, 12:45 PM	#1
kbryant Area P Name: Kerry Location: SoCal & South Florida Join Date: Dec 2008 Motorcycle(s): Too many to list Posts: 439	Area P - GB (for the new-gen 250!) Runs through February 28. The Area P GB is offered for both 250 and 300 models and is available exclusively to ninjette.org members only. Member David White ("diwhiteii") has volunteered to assist with administrating the GB threads on both forums. It won’t be based on quantity or minimums. It won’t be based on one particular style system. You can drop out without any drama if you change your mind. Payments are not required until the GB ends and we actually begin assembling/shipping orders. In addition - If we reach orders for 10+ systems on the 250 - at the conclusion of the GB and after all the orders are assembled/shipped –– those names will get “dropped into a hat”. Alex will then pull one name out and that person will get their exhaust system purchase price refunded! We’ll do the same offer for the 300 GB if we reach 10+ systems! The 250 GB will run until the end of February (28th) 2013. At the conclusion, order processing will commence. The 300 GB will run until the end of March (31st) 2013. (link to 300 group buy thread) The reason for leaving this one open longer, is simply we are still working on the Tooling/Fixtures. Exhaust Systems are not yet available. Our systems are very complex and unique in design. They share nothing in common with the 250. Therefore, all new Tooling/Fixtures are required and must meet our high standards of precision. Currently we are projecting the first article production systems to be ready for check-fit in Mid-March. Production systems will follow directly after and are projected to be available end of March. If any unforeseen delays in production are experienced, we will still honor the intro GB pricing, provided your name was on the original list at its conclusion (March 31, 2013). And of course you are under no obligation and are free to drop out at any time. So what’s the deal? - For the 250 - $50.00 off any system. $75.00 off when you purchase a system and Jet kit.* For the 300 - $75.00 off any system. $100.00 off when you purchase a system and FI Micro Programmer. (link to 300 group buy thread) Limit one order per member. No dealers. Last futzed with by kbryant; February 9th, 2013 at 04:15 PM.*

January 31st, 2013, 12:51 PM	#2
csmith12 The Corner Whisperer Name: Chris (aka Reactor) Location: Northern KY Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much. MOTY 2015, MOTM - Nov '12, Nov '13	Subbed & perfect timing Kerry. I need a race exhaust. __________________________________________________ Goal: Shake A Million Hands \| Look through the corners \| Track Day Prep \| Closest track? \| The Mid-Ohio School

February 9th, 2013, 04:18 PM	#5
kbryant Area P Name: Kerry Location: SoCal & South Florida Join Date: Dec 2008 Motorcycle(s): Too many to list Posts: 439	GB officially open. Last futzed with by kbryant; February 9th, 2013 at 08:21 PM.

February 9th, 2013, 07:13 PM	#6
Jiggles Jigglin' your Jiglets Name: Sean Location: San Jose, Ca Join Date: Jun 2011 Motorcycle(s): 2009 K1300S, 2013 Ninja 300, 2011 Ninja 250R, Faster than Unregistered's ninjette Posts: Too much. Blog Entries: 1 MOTM - Apr '13	I should pick up a second in case I crash __________________________________________________ If the Ninja 250 doesn't have enough power for you, then you don't know how to ride it. AFM #676 Supersports are for n00bs

February 9th, 2013, 07:25 PM	#8
Trailerboy531 Gear crash test dummy Name: Max Location: South Bay (So. Cal) Join Date: May 2011 Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r Posts: A lot.	@menikmatl - cream yourself sir. Love this system. Literally the best part of my bike and the gains are noticeable. The sound is perfect, not too loud but lots of grunt; and the look is beautiful. Kerry is nothing less than an absolute pleasure to deal with. Everybody get on this. __________________________________________________ CVMA #531

February 3rd, 2013, 01:03 AM	#3
Ninja Chris ninjette.org member Name: Christian Location: Orange County, Ca Join Date: Jan 2011 Motorcycle(s): 2012 Black & Yellow Ninja 250 Posts: 70	Woohooo! I was hoping a GB would come around again

February 3rd, 2013, 07:24 PM	#4
joshuatrueanderson ninjette.org member Name: Josh Location: vail, co Join Date: Jan 2013 Motorcycle(s): 08 250r, blue Posts: 44	yeah im in for one

February 9th, 2013, 07:30 PM	#9
csmith12 The Corner Whisperer Name: Chris (aka Reactor) Location: Northern KY Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much. MOTY 2015, MOTM - Nov '12, Nov '13	I am gunna pull this off, you can go ahead and add me now. Just gotta save a few more pennies. __________________________________________________ Goal: Shake A Million Hands \| Look through the corners \| Track Day Prep \| Closest track? \| The Mid-Ohio School

February 9th, 2013, 08:05 PM	#10
diwhiteii ninjette.org guru Name: David Location: Lafayette, CA Join Date: May 2010 Motorcycle(s): 2009 Ninja 250R, 2013 Ninja 300 Posts: 279	Hello to All, I am David White and am the one assisting with administration of the GB threads on both forums. Feel free to direct your questions to me about the group buy and I make sure to get back with you as soon as possible. Please try to keep your questions inline with the group buy so I can keep accurate data on the number of people interested. I am very knowledgable about the Ninja 250R & 300, so I should be able to answer your question, if not I will contact Kerry to get you the right answer. I am ready to start taking names, so get those tax returns ready!

February 9th, 2013, 08:13 PM	#11
diwhiteii ninjette.org guru Name: David Location: Lafayette, CA Join Date: May 2010 Motorcycle(s): 2009 Ninja 250R, 2013 Ninja 300 Posts: 279	Group Buy List So far I have two on the list. 1.joshuatrueanderson 2.csmith12 Any others?

February 9th, 2013, 11:52 PM	#12
CThunder-blue ModMy250.com Name: Tri Location: St, Louis Join Date: Sep 2010 Motorcycle(s): 2009 Ninja 250R, 2005 R6 Posts: A lot.	@Alex should probably move this to the Classifieds section. Good luck with the GB! __________________________________________________ The www.ModMy250.com guy

February 10th, 2013, 01:32 AM	#13
psych0hans ninjette.org certified postwhore Name: Hansveer Location: Bombay, India Join Date: Jan 2012 Motorcycle(s): Ninja 250r - Track whore, Ninja 300 - SOLD, KTM RC390 - Orange Hulk, Ducati 899 Panigale - Red Devil. Posts: A lot.	How much would this cost me and would you ship to india? Do I get a Special discount because I'm Indian and thus a cheap b***ard by nature? Do you have PCV maps for this? Can I get it in return for sexual favours?are the bike and the dyno standard equipment? P.s. yes, I am a certified asshole... __________________________________________________ GETTING BACK INTO RIDING? Read this.

February 10th, 2013, 01:44 AM	#14
xaple ninjette.org guru Name: Daniel "God" Location: South Florida Join Date: Aug 2012 Motorcycle(s): Ninja 250 Posts: 326	What is a GB?

February 10th, 2013, 08:21 AM	#16
TheDementedDrummer Present. Somewhat. Name: Neel Location: Bangalore, India Join Date: Sep 2012 Motorcycle(s): 2012 KTM Duke 200, 2011 Ninja 250r, 2011 Ducati Monster 796, 2014 Kawasaki ZX10r Posts: 227	Group Buy, i'm guessing __________________________________________________ Highest speed on two wheels- 230 km/h Beat that.

February 12th, 2013, 09:57 PM	#24
rc-rick ninjette.org member Name: Rick Location: St Peters Join Date: Feb 2013 Motorcycle(s): '09 ZX6 (street), '04 RC51 (street/track), '08 Ninja 250 (race) Posts: 104	@diwhiteii, what is the difference with the 4 full race exhausts? I am interested in the buy but not sure which one.

February 12th, 2013, 10:02 PM	#25
Alex ninjette.org dude Name: 1 guess :-) Location: SF Bay Area Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much. Blog Entries: 7	/moved thread to marketplace, clarified title for the 250, added links to the related 300 group buy thread __________________________________________________ Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered)

February 12th, 2013, 11:17 PM	#26
mikecronis ninjette.org member Name: Mike Location: Colorado Springs, CO Join Date: Jun 2010 Motorcycle(s): 2008 Kawasaki Ninja 250R-J, 2005 Honda Superhawk VTR1000 Posts: 95	I'm in. Do you know if that comes with free shipping to CONUS (continental United States)? Maybe you could ask/finagle it with them?

February 13th, 2013, 10:40 AM	#29
diwhiteii ninjette.org guru Name: David Location: Lafayette, CA Join Date: May 2010 Motorcycle(s): 2009 Ninja 250R, 2013 Ninja 300 Posts: 279	Updated Group Buy List 250R 1.joshuatrueanderson 2.csmith12 3.mikecronis

February 13th, 2013, 02:17 PM	#30
joshuatrueanderson ninjette.org member Name: Josh Location: vail, co Join Date: Jan 2013 Motorcycle(s): 08 250r, blue Posts: 44	decided to roll with the 12" race system carbon fiber muffler with Flat Conical Billet End Cap + custom Area p jet kit + exhaust hanger bracket (black). cant wait to get it all tuned up.

February 13th, 2013, 03:33 PM	#32
akima Nooblet Name: Akima Location: England Join Date: Jul 2011 Motorcycle(s): 2011 Ninja 250R FI Posts: A lot. Blog Entries: 5 MOTM - Oct '13	Count me in! It's my birthday this month so I'll treat myself I want the full stainless steel mid-high mount race system with 18" Carbon Fiber Muffler. I will be installing this on a British ninja 250R, so besides its funny accent it also has fuel injection. Do you guys have the maps I need to install in a power commander? Also: I guess I'll need a new airbox/filter to go with this exhaust. Can you recommend one? Are there any other changes I should make to the bike to make the most of this exhaust? Also: how much will it cost to ship to England? This is going to be an expensive upgrade!

February 13th, 2013, 04:25 PM	#37
joshuatrueanderson ninjette.org member Name: Josh Location: vail, co Join Date: Jan 2013 Motorcycle(s): 08 250r, blue Posts: 44	i wanted short cuz i wanted the mgp growler.SOUND SO SICK.... no im kidding... the 18 is the way to go. Just looked a little too stock for my liking, but on this little 250, ill sip out any hp's i can get. Area p is the ****!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pre-Gen Parts, SF Bay Area	greenaero	Motorcycle-related	2	April 6th, 2014 10:42 AM
SF Bay Area Ninjetters invited for FE/fun runs 9/27-9/30	greenaero	Ride Reports	15	September 28th, 2013 04:29 PM
Area P - GB (for the 300!) Runs through March 31.	kbryant	Motorcycle-related	299	August 12th, 2013 08:25 PM
pre-gen runs rough under load	emoyer	1986 - 2007 Ninja 250R Tech Talk	76	February 16th, 2013 08:30 PM
GB- Area P New Gen Standard Exhaust	kkim	Motorcycle-related	49	November 1st, 2011 09:45 PM