Area P - GB (for the new-gen 250!) Runs through February 28. - Page 3

diwhiteii · February 18th, 2013, 02:25 PM

Quote:

Originally Posted by Stinub91

The standard carbon fiber exhaust with the dynojet stage 2 kit please

Got it down

kbryant · February 18th, 2013, 02:56 PM

Quote:

Originally Posted by mariorivera830

I was afraid of that. Word on the streets is that you guys don't mess around! Ok I guess I will have to be innovative to achieve what I want done. Thanks again. I see that you guys are based out in Anaheim and somewhere in Florida, is your shop is Anaheim available for visits? In case I'm not able to get the money in before the group buy is done with, to help save on shipping and a few pointers on installation?

No sorry, our Anaheim facility is primarily manufacturing only now. No Will Call or Sales are done through there. We do a lot of projects for other companies and simply can't allow visitors to walk through the facility.

On the other hand, our South Florida facility has installation and tuning available. So you are welcome to drive out for any assistance you need

. The system will come with detailed instructions and pictures for easy installation with normal hand tools. And any assistance you need, we are here to support and help.

mariorivera830 · February 18th, 2013, 03:18 PM

Quote:

Originally Posted by kbryant

No sorry, our Anaheim facility is primarily manufacturing only now. No Will Call or Sales are done through there. We do a lot of projects for other companies and simply can't allow visitors to walk through the facility.

On the other hand, our South Florida facility has installation and tuning available. So you are welcome to drive out for any assistance you need

. The system will come with detailed instructions and pictures for easy installation with normal hand tools. And any assistance you need, we are here to support and help.

Figures! I understand though. If my wife gets her wish and we go to Disney World next year, I may have to take you up on that! I've also been perusing the older threads on installing your exhausts and am learning from some of the other guy's mistakes. I see the debate so far is snorkel or no snorkel. At least so far.

sim80n · February 19th, 2013, 07:18 AM

Please put me down for the full stainless steel mid-high mount race system with 18" Carbon Fiber Muffler + Area P Customized Dynojet Kit #2193R. Thanks.

diwhiteii · February 20th, 2013, 01:17 AM

1.Joshuatrueanderson - 18" race system carbon fiber muffler with Flat Conical Billet End Cap + custom Area p jet kit + exhaust hanger bracket (black)
2.csmith12
3.mikecronis
4.akima - full stainless steel mid-high mount race system with 18" Carbon Fiber Muffler
5.Stinub91- standard carbon fiber exhaust with the dynojet stage 2 kit
6.mariorivera830- 12" carbon fiber can, conical end cap, area p custom jet kit
7.sim80n- full stainless steel mid-high mount race system with 18" Carbon Fiber Muffler + Area P Customized Dynojet Kit #2193R

mikecronis · February 20th, 2013, 09:23 PM

Forgot to say: Full stainless steel system with 18" Carbon Fiber Muffler "Race system"

diwhiteii · February 20th, 2013, 10:59 PM

1.Joshuatrueanderson - 18" race system carbon fiber muffler with Flat Conical Billet End Cap + custom Area p jet kit + exhaust hanger bracket (black)
2.csmith12
3.mikecronis - Full stainless steel system with 18" Carbon Fiber Muffler "Race system"
4.akima - full stainless steel mid-high mount race system with 18" Carbon Fiber Muffler
5.Stinub91- standard carbon fiber exhaust with the dynojet stage 2 kit
6.mariorivera830- 12" carbon fiber can, conical end cap, area p custom jet kit
7.sim80n- full stainless steel mid-high mount race system with 18" Carbon Fiber Muffler + Area P Customized Dynojet Kit #2193R

coughing skunk · February 22nd, 2013, 08:54 AM

@kbryant Any chance that you guys would make some pregen exhausts? I'd get on the boat with a full stainless system with an 18" carbon muffler and jet kit if you do.

kbryant · February 22nd, 2013, 11:40 AM

Quote:

Originally Posted by coughing skunk

@kbryant Any chance that you guys would make some pregen exhausts? I'd get on the boat with a full stainless system with an 18" carbon muffler and jet kit if you do.

Thank you for asking. But no plans at this time to do another run of the '88 - 07 systems.

alanmv567 · February 22nd, 2013, 04:00 PM

So I have a 250r 2008...would this benefit me in improving commuting freeway?

RacerX113 · February 22nd, 2013, 07:37 PM

I'm in for 2 ea. Can you ship 2 to the same addressfor the $19.99

2ea - Full stainless steel system with 18" Carbon Fiber Muffler

2ea - Standard Dynojet Kit# 2193

2ea - exhaust hanger bracket (black)

Thanks,
Doug

joshuatrueanderson · February 23rd, 2013, 01:43 AM

some one else jump on this! They might pull YOUR name outta the hat if we get 10+ (hopefully mine)

csmith12 · February 23rd, 2013, 08:32 AM

Quote:

Originally Posted by RacerX113

I'm in for 2 ea. Can you ship 2 to the same addressfor the $19.99

2ea - Full stainless steel system with 18" Carbon Fiber Muffler

2ea - Standard Dynojet Kit# 2193

2ea - exhaust hanger bracket (black)

Thanks,
Doug

diwhiteii · February 23rd, 2013, 10:55 AM

Quote:

Originally Posted by alanmv567

So I have a 250r 2008...would this benefit me in improving commuting freeway?

It depends on what your looking to accomplish. If you want more power, power is a benefit. If you want weight saving, weight saving is a benefit. If you want looks and sound, these are also benefits. I believe all these benefits would improve your commute.

diwhiteii · February 23rd, 2013, 11:02 AM

Quote:

Originally Posted by RacerX113

I'm in for 2 ea. Can you ship 2 to the same addressfor the $19.99

2ea - Full stainless steel system with 18" Carbon Fiber Muffler

2ea - Standard Dynojet Kit# 2193

2ea - exhaust hanger bracket (black)

Thanks,
Doug

Got you down for two Doug.

diwhiteii · February 23rd, 2013, 11:04 AM

Quote:

Originally Posted by csmith12

I am gunna pull this off, you can go ahead and add me now. Just gotta save a few more pennies.

What kind of exhaust do you want me to put down for you?

diwhiteii · February 23rd, 2013, 11:06 AM

Group Buy 250R
1.Joshuatrueanderson - 18" race system carbon fiber muffler with Flat Conical Billet End Cap + custom Area p jet kit + exhaust hanger bracket (black)
2.csmith12- Race Mid-High mount Full stainless steel system with 12" Stainless Steel Muffler
3.mikecronis - Full stainless steel system with 18" Carbon Fiber Muffler "Race system"
4.akima - full stainless steel mid-high mount race system with 18" Carbon Fiber Muffler
5.Stinub91- standard carbon fiber exhaust with the dynojet stage 2 kit
6.mariorivera830- 12" carbon fiber can, conical end cap, area p custom jet kit
7.sim80n- full stainless steel mid-high mount race system with 18" Carbon Fiber Muffler + Area P Customized Dynojet Kit #2193R
8.RacerX113 - Full Race Mid-High stainless steel system with 18" Carbon Fiber Muffler, Standard Dynojet Kit# 2193 - exhaust hanger bracket (black)
9.RacerX113 - Full Race Mid-High stainless steel system with 18" Carbon Fiber Muffler, Standard Dynojet Kit# 2193 - exhaust hanger bracket (black)
10.?
11.?

csmith12 · February 23rd, 2013, 11:15 AM

Quote:

Originally Posted by diwhiteii

What kind of exhaust do you want me to put down for you?

I will be cutting this super close on the budget. There is a chance my budget may fall through.

I will be super bummed too because I made it in the GB for the pregen and really love the exhaust.

If everything goes well, I will need the race/high mount Full stainless steel system with 12" Stainless Steel Muffler with gaskets/bracket if they are not included.

Thanks for the reminder, I am running out of time quickly.

RacerX113 · February 23rd, 2013, 11:34 AM

Quote:

Originally Posted by csmith12

.

The second one is actually for a friend, who is putting his together to go racing with me.

Is it safe to assume two puts me in the hat twice for the freebie? Buy one get one free would be sweet.

csmith12 · February 23rd, 2013, 11:39 AM

I think you should be counted as 2 for sure.

Don't even be frontin' yo, I need that free one. bwahahahahhaha I am stretched super tight. Kids college apps or race exhaust?!?!?!? You know which I have to choose but I gots me plan B in the works.

RacerX113 · February 23rd, 2013, 11:40 AM

Quote:

Originally Posted by diwhiteii

Got you down for two Doug.

Thanks.

Just for clarification these both will be the Race high mount full exhausts.

Thanks,
Doug

RacerX113 · February 23rd, 2013, 11:45 AM

Quote:

Originally Posted by diwhiteii

Got you down for two Doug.

Thanks.

Just for clarification these both will be the Race high mount full exhausts.

Thanks,
Doug

diwhiteii · February 23rd, 2013, 11:49 AM

Quote:

Originally Posted by csmith12

I will be cutting this super close on the budget. There is a chance my budget may fall through.

I will be super bummed too because I made it in the GB for the pregen and really love the exhaust.

If everything goes well, I will need the race/high mount Full stainless steel system with 12" Stainless Steel Muffler with gaskets/bracket if they are not included.

Thanks for the reminder, I am running out of time quickly.

Hope you can swing it. Would want you to miss out on this great deal.

diwhiteii · February 23rd, 2013, 11:51 AM

Quote:

Originally Posted by RacerX113

Thanks.

Just for clarification these both will be the Race high mount full exhausts.

Thanks,
Doug

Made the update.

diwhiteii · February 23rd, 2013, 11:55 AM

Quote:

Originally Posted by RacerX113

Thanks.

Just for clarification these both will be the Race high mount full exhausts.

Thanks,
Doug

Yep. Mid-High exhaust

akima · February 23rd, 2013, 12:29 PM

I'm going to be installing a PCV and upgrading the airbox, but out of curiosity - if I didn't do those things, would I still see a performance benefit?

diwhiteii · February 23rd, 2013, 12:35 PM

1.Joshuatrueanderson - 18" race system carbon fiber muffler with Flat Conical Billet End Cap + custom Area p jet kit + exhaust hanger bracket (black)
2csmith12-Race Mid-High mount Full stainless steel system with 12" Stainless Steel Muffler
3.mikecronis - Full stainless steel system with 18" Carbon Fiber Muffler "Race system"
4.akima - full stainless steel mid-high mount race system with 18" Carbon Fiber Muffler
5.Stinub91- standard carbon fiber exhaust with the dynojet stage 2 kit
6.mariorivera830- 12" carbon fiber can, conical end cap, area p custom jet kit
7.sim80n- full stainless steel mid-high mount race system with 18" Carbon Fiber Muffler + Area P Customized Dynojet Kit #2193R
8.RacerX113 - Full Race Mid-High stainless steel system with 18" Carbon Fiber Muffler, Standard Dynojet Kit# 2193 - exhaust hanger bracket (black)
9.diwhiteii- Full Race Mid-High stainless steel system with 18" Carbon fiber Muffler
10. ?

diwhiteii · February 23rd, 2013, 12:43 PM

Quote:

Originally Posted by akima

I'm going to be installing a PCV and upgrading the airbox, but out of curiosity - if I didn't do those things, would I still see a performance benefit?

You're air fuel mixtures would be off if you just put a full exhaust on and didn't have a PCV or FI Micro Tuner. Your bike wouldn't run right because you would be increasing the air flow without making the proper fuel adjustments.

alanmv567 · February 23rd, 2013, 03:15 PM

Quote:

Originally Posted by diwhiteii

It depends on what your looking to accomplish. If you want more power, power is a benefit. If you want weight saving, weight saving is a benefit. If you want looks and sound, these are also benefits. I believe all these benefits would improve your commute.

So what are the prices and items being offered for this?

diwhiteii · February 23rd, 2013, 04:08 PM

Quote:

Originally Posted by alanmv567

So what are the prices and items being offered for this?

Check out the website to see which one you want. See below

Regular Full System link:

http://areapnolimits.com/products/Sl...-250R-2008.php

Mid-High Race System link:

http://areapnolimits.com/products/Sl...-Race-2008.php

mariorivera830 · February 23rd, 2013, 07:12 PM

I definitely got the go ahead from the wife and uncle Sam! I am definitely in there like swimwear! Can't wait!

diwhiteii · February 23rd, 2013, 08:07 PM

Quote:

Originally Posted by RacerX113

I'm in for 2 ea. Can you ship 2 to the same addressfor the $19.99

2ea - Full stainless steel system with 18" Carbon Fiber Muffler

2ea - Standard Dynojet Kit# 2193

2ea - exhaust hanger bracket (black)

Thanks,
Doug

Hi Doug, I just realized that the GB only allows one exhaust per person and they have to be ninjette.org members. Have your friend join it only takes a minute. As far as the shipping goes it is $19.50 "per system" within the lower 48states with no wiggle room, sorry bud. I forgot that it stated the one person on page one, my bad. Get your friend to sign up soon so I can add his name to the list. Sorry again for the confusion.

RacerX113 · February 23rd, 2013, 09:21 PM

Quote:

Originally Posted by diwhiteii

Hi Doug, I just realized that the GB only allows one exhaust per person and they have to be ninjette.org members. Have your friend join it only takes a minute. As far as the shipping goes it is $19.50 "per system" within the lower 48states with no wiggle room, sorry bud. I forgot that it stated the one person on page one, my bad. Get your friend to sign up soon so I can add his name to the list. Sorry again for the confusion.

No worries. He's a member. I'll let him know to put his name on the list.

Thanks,
Doug

scoopshovelowski · February 24th, 2013, 06:58 AM

ok, I'm Doug, AKA RacerX's buddy, so I need :

1ea - Full stainless steel system with 18" Carbon Fiber Muffler

1ea - Standard Dynojet Kit# 2193

1ea - exhaust hanger bracket (black)

Thanks to everyone that set this up.

SeanO

diwhiteii · February 24th, 2013, 11:19 AM

Quote:

Originally Posted by scoopshovelowski

ok, I'm Doug, AKA RacerX's buddy, so I need :

1ea - Full stainless steel system with 18" Carbon Fiber Muffler

1ea - Standard Dynojet Kit# 2193

1ea - exhaust hanger bracket (black)

Thanks to everyone that set this up.

SeanO

Got you down Sean Thanks.

diwhiteii · February 24th, 2013, 11:28 AM

Group Buy 250R

1.Joshuatrueanderson - 18" race system carbon fiber muffler with Flat Conical Billet End Cap + custom Area p jet kit + exhaust hanger bracket (black)
2.csmith12- Race Mid-High mount Full stainless steel system with 12" Stainless Steel Muffler
3.mikecronis - Full stainless steel system with 18" Carbon Fiber Muffler "Race system"
4.akima - full stainless steel mid-high mount race system with 18" Carbon Fiber Muffler
5.Stinub91- standard carbon fiber exhaust with the dynojet stage 2 kit
6.mariorivera830- 12" carbon fiber can, conical end cap, area p custom jet kit
7.sim80n- full stainless steel mid-high mount race system with 18" Carbon Fiber Muffler + Area P Customized Dynojet Kit #2193R
8.RacerX113 - Full Race Mid-High stainless steel system with 18" Carbon Fiber Muffler, Standard Dynojet Kit# 2193 - exhaust hanger bracket (black)
9.scoopshovelowski- Full race Mid-High stainless steel system with 18" Carbon Fiber Muffler, Standard Dynojet Kit# 2193 - exhaust hanger bracket (black)
10.diwhiteii- Full Race Mid-High stainless steel system with 18" Carbon fiber Muffler, exhaust hanger bracket (black)
11?

RacerX113 · February 24th, 2013, 09:48 PM

I've read in other posts that there might be a fittment issue with the race high mount AreaP and woodcraft rear sets. Does anyone know if the same issue effects the Vortex? I am getting ready to buy one or the other. I was leaning toward the Woodcraft, but if the Vortex fit better I will get them.

Thanks
Doug

dailowill · February 25th, 2013, 05:49 AM

Hey David,

Can you add me onto the group buy for a "Full Stainless Steel System, 18" Quiet Carbon Fiber Muffler". Thanks!

Will

diwhiteii · February 25th, 2013, 12:31 PM

1.Joshuatrueanderson - 18" race system carbon fiber muffler with Flat Conical Billet End Cap + custom Area p jet kit + exhaust hanger bracket (black)
2.csmith12- Race Mid-High mount Full stainless steel system with 12" Stainless Steel Muffler
3.mikecronis - Full stainless steel system with 18" Carbon Fiber Muffler "Race system"
4.akima - full stainless steel mid-high mount race system with 18" Carbon Fiber Muffler
5.Stinub91- standard carbon fiber exhaust with the dynojet stage 2 kit
6.mariorivera830- 12" carbon fiber can, conical end cap, area p custom jet kit
7.sim80n- full stainless steel mid-high mount race system with 18" Carbon Fiber Muffler + Area P Customized Dynojet Kit #2193R
8.RacerX113 - Full Race Mid-High stainless steel system with 18" Carbon Fiber Muffler, Standard Dynojet Kit# 2193 - exhaust hanger bracket (black)
9.scoopshovelowski- Full race Mid-High stainless steel system with 18" Carbon Fiber Muffler, Standard Dynojet Kit# 2193 - exhaust hanger bracket (black)
10.diwhiteii- Full Race Mid-High stainless steel system with 18" Carbon fiber Muffler, exhaust hanger bracket (black)
11.dailowill- "Full Stainless Steel System, 18" Quiet Carbon Fiber Muffler"

diwhiteii · February 25th, 2013, 12:32 PM

Quote:

Originally Posted by dailowill

Hey David,

Can you add me onto the group buy for a "Full Stainless Steel System, 18" Quiet Carbon Fiber Muffler". Thanks!

Will

Got you down.

February 20th, 2013, 01:17 AM	#85
diwhiteii ninjette.org guru Name: David Location: Lafayette, CA Join Date: May 2010 Motorcycle(s): 2009 Ninja 250R, 2013 Ninja 300 Posts: 279	Updated list, Almost to ten, eight more days left, any other takers? 1.Joshuatrueanderson - 18" race system carbon fiber muffler with Flat Conical Billet End Cap + custom Area p jet kit + exhaust hanger bracket (black) 2.csmith12 3.mikecronis 4.akima - full stainless steel mid-high mount race system with 18" Carbon Fiber Muffler 5.Stinub91- standard carbon fiber exhaust with the dynojet stage 2 kit 6.mariorivera830- 12" carbon fiber can, conical end cap, area p custom jet kit 7.sim80n- full stainless steel mid-high mount race system with 18" Carbon Fiber Muffler + Area P Customized Dynojet Kit #2193R

February 20th, 2013, 10:59 PM	#87
diwhiteii ninjette.org guru Name: David Location: Lafayette, CA Join Date: May 2010 Motorcycle(s): 2009 Ninja 250R, 2013 Ninja 300 Posts: 279	Update 1.Joshuatrueanderson - 18" race system carbon fiber muffler with Flat Conical Billet End Cap + custom Area p jet kit + exhaust hanger bracket (black) 2.csmith12 3.mikecronis - Full stainless steel system with 18" Carbon Fiber Muffler "Race system" 4.akima - full stainless steel mid-high mount race system with 18" Carbon Fiber Muffler 5.Stinub91- standard carbon fiber exhaust with the dynojet stage 2 kit 6.mariorivera830- 12" carbon fiber can, conical end cap, area p custom jet kit 7.sim80n- full stainless steel mid-high mount race system with 18" Carbon Fiber Muffler + Area P Customized Dynojet Kit #2193R

February 23rd, 2013, 11:06 AM	#97
diwhiteii ninjette.org guru Name: David Location: Lafayette, CA Join Date: May 2010 Motorcycle(s): 2009 Ninja 250R, 2013 Ninja 300 Posts: 279	Updated list! Lets get two more names on the list! Group Buy 250R 1.Joshuatrueanderson - 18" race system carbon fiber muffler with Flat Conical Billet End Cap + custom Area p jet kit + exhaust hanger bracket (black) 2.csmith12- Race Mid-High mount Full stainless steel system with 12" Stainless Steel Muffler 3.mikecronis - Full stainless steel system with 18" Carbon Fiber Muffler "Race system" 4.akima - full stainless steel mid-high mount race system with 18" Carbon Fiber Muffler 5.Stinub91- standard carbon fiber exhaust with the dynojet stage 2 kit 6.mariorivera830- 12" carbon fiber can, conical end cap, area p custom jet kit 7.sim80n- full stainless steel mid-high mount race system with 18" Carbon Fiber Muffler + Area P Customized Dynojet Kit #2193R 8.RacerX113 - Full Race Mid-High stainless steel system with 18" Carbon Fiber Muffler, Standard Dynojet Kit# 2193 - exhaust hanger bracket (black) 9.RacerX113 - Full Race Mid-High stainless steel system with 18" Carbon Fiber Muffler, Standard Dynojet Kit# 2193 - exhaust hanger bracket (black) 10.? 11.?

February 23rd, 2013, 11:39 AM	#100
csmith12 The Corner Whisperer Name: Chris (aka Reactor) Location: Northern KY Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much. MOTY 2015, MOTM - Nov '12, Nov '13	I think you should be counted as 2 for sure. Don't even be frontin' yo, I need that free one. bwahahahahhaha I am stretched super tight. Kids college apps or race exhaust?!?!?!? You know which I have to choose but I gots me plan B in the works. __________________________________________________ Goal: Shake A Million Hands \| Look through the corners \| Track Day Prep \| Closest track? \| The Mid-Ohio School

February 23rd, 2013, 12:35 PM	#107
diwhiteii ninjette.org guru Name: David Location: Lafayette, CA Join Date: May 2010 Motorcycle(s): 2009 Ninja 250R, 2013 Ninja 300 Posts: 279	Updated list! We are almost to ten! 1.Joshuatrueanderson - 18" race system carbon fiber muffler with Flat Conical Billet End Cap + custom Area p jet kit + exhaust hanger bracket (black) 2csmith12-Race Mid-High mount Full stainless steel system with 12" Stainless Steel Muffler 3.mikecronis - Full stainless steel system with 18" Carbon Fiber Muffler "Race system" 4.akima - full stainless steel mid-high mount race system with 18" Carbon Fiber Muffler 5.Stinub91- standard carbon fiber exhaust with the dynojet stage 2 kit 6.mariorivera830- 12" carbon fiber can, conical end cap, area p custom jet kit 7.sim80n- full stainless steel mid-high mount race system with 18" Carbon Fiber Muffler + Area P Customized Dynojet Kit #2193R 8.RacerX113 - Full Race Mid-High stainless steel system with 18" Carbon Fiber Muffler, Standard Dynojet Kit# 2193 - exhaust hanger bracket (black) 9.diwhiteii- Full Race Mid-High stainless steel system with 18" Carbon fiber Muffler 10. ? Last futzed with by diwhiteii; February 23rd, 2013 at 08:10 PM.

February 19th, 2013, 07:18 AM	#84
sim80n ninjette.org newbie Name: Steve Location: Central texas Join Date: Apr 2012 Motorcycle(s): 2011 Ninja 250r SE Posts: 3	Please put me down for the full stainless steel mid-high mount race system with 18" Carbon Fiber Muffler + Area P Customized Dynojet Kit #2193R. Thanks.

February 20th, 2013, 09:23 PM	#86
mikecronis ninjette.org member Name: Mike Location: Colorado Springs, CO Join Date: Jun 2010 Motorcycle(s): 2008 Kawasaki Ninja 250R-J, 2005 Honda Superhawk VTR1000 Posts: 95	Forgot to say: Full stainless steel system with 18" Carbon Fiber Muffler "Race system"

February 22nd, 2013, 08:54 AM	#88
coughing skunk ninjette.org member Name: chris Location: northern colorado Join Date: Oct 2012 Motorcycle(s): 07 ninja250r 73 xs650 70 honda cl100 Posts: 17	@kbryant Any chance that you guys would make some pregen exhausts? I'd get on the boat with a full stainless system with an 18" carbon muffler and jet kit if you do.

February 22nd, 2013, 04:00 PM	#90
alanmv567 ninjette.org member Name: Alan Location: Lynwood,CA Join Date: Jan 2013 Motorcycle(s): 2008 Kawasaki Ninja 250R (Sold to jerrytheclown!) 2006 Yamaha FZ6 Posts: 85	So I have a 250r 2008...would this benefit me in improving commuting freeway?

February 22nd, 2013, 07:37 PM	#91
RacerX113 ninjette.org member Name: Doug Location: Atlanta Join Date: Jul 2011 Motorcycle(s): Triumph Thruxton, Ninja 250 Posts: 148	I'm in for 2 ea. Can you ship 2 to the same addressfor the $19.99 2ea - Full stainless steel system with 18" Carbon Fiber Muffler 2ea - Standard Dynojet Kit# 2193 2ea - exhaust hanger bracket (black) Thanks, Doug

February 23rd, 2013, 01:43 AM	#92
joshuatrueanderson ninjette.org member Name: Josh Location: vail, co Join Date: Jan 2013 Motorcycle(s): 08 250r, blue Posts: 44	some one else jump on this! They might pull YOUR name outta the hat if we get 10+ (hopefully mine)

February 23rd, 2013, 12:29 PM	#106
akima Nooblet Name: Akima Location: England Join Date: Jul 2011 Motorcycle(s): 2011 Ninja 250R FI Posts: A lot. Blog Entries: 5 MOTM - Oct '13	I'm going to be installing a PCV and upgrading the airbox, but out of curiosity - if I didn't do those things, would I still see a performance benefit?

February 23rd, 2013, 07:12 PM	#111
mariorivera830 MoVal's only ninjette :( Name: Mario Location: Moreno Valley, Ca Join Date: Jul 2012 Motorcycle(s): 2012 Ninja 250r SE Black with a dash of yellow Posts: 120	I definitely got the go ahead from the wife and uncle Sam! I am definitely in there like swimwear! Can't wait! __________________________________________________ Success is the ability to go from one failure to the next, without any loss of enthusiasm-

February 24th, 2013, 06:58 AM	#114
scoopshovelowski ninjette.org newbie Name: Sean Location: west georgia Join Date: Aug 2011 Motorcycle(s): 08 ninja 250, 4 harleys, wr250f Posts: 7	ok, I'm Doug, AKA RacerX's buddy, so I need : 1ea - Full stainless steel system with 18" Carbon Fiber Muffler 1ea - Standard Dynojet Kit# 2193 1ea - exhaust hanger bracket (black) Thanks to everyone that set this up. SeanO

February 24th, 2013, 11:28 AM	#116
diwhiteii ninjette.org guru Name: David Location: Lafayette, CA Join Date: May 2010 Motorcycle(s): 2009 Ninja 250R, 2013 Ninja 300 Posts: 279	Made it to ten but who's number 11? Updated List! Group Buy 250R 1.Joshuatrueanderson - 18" race system carbon fiber muffler with Flat Conical Billet End Cap + custom Area p jet kit + exhaust hanger bracket (black) 2.csmith12- Race Mid-High mount Full stainless steel system with 12" Stainless Steel Muffler 3.mikecronis - Full stainless steel system with 18" Carbon Fiber Muffler "Race system" 4.akima - full stainless steel mid-high mount race system with 18" Carbon Fiber Muffler 5.Stinub91- standard carbon fiber exhaust with the dynojet stage 2 kit 6.mariorivera830- 12" carbon fiber can, conical end cap, area p custom jet kit 7.sim80n- full stainless steel mid-high mount race system with 18" Carbon Fiber Muffler + Area P Customized Dynojet Kit #2193R 8.RacerX113 - Full Race Mid-High stainless steel system with 18" Carbon Fiber Muffler, Standard Dynojet Kit# 2193 - exhaust hanger bracket (black) 9.scoopshovelowski- Full race Mid-High stainless steel system with 18" Carbon Fiber Muffler, Standard Dynojet Kit# 2193 - exhaust hanger bracket (black) 10.diwhiteii- Full Race Mid-High stainless steel system with 18" Carbon fiber Muffler, exhaust hanger bracket (black) 11?

February 24th, 2013, 09:48 PM	#117
RacerX113 ninjette.org member Name: Doug Location: Atlanta Join Date: Jul 2011 Motorcycle(s): Triumph Thruxton, Ninja 250 Posts: 148	I've read in other posts that there might be a fittment issue with the race high mount AreaP and woodcraft rear sets. Does anyone know if the same issue effects the Vortex? I am getting ready to buy one or the other. I was leaning toward the Woodcraft, but if the Vortex fit better I will get them. Thanks Doug

February 25th, 2013, 05:49 AM	#118
dailowill ninjette.org member Name: Will Location: CT Join Date: Aug 2010 Motorcycle(s): 2010 Ninja 250R Posts: 54	Hey David, Can you add me onto the group buy for a "Full Stainless Steel System, 18" Quiet Carbon Fiber Muffler". Thanks! Will

February 25th, 2013, 12:31 PM	#119
diwhiteii ninjette.org guru Name: David Location: Lafayette, CA Join Date: May 2010 Motorcycle(s): 2009 Ninja 250R, 2013 Ninja 300 Posts: 279	At 11 with four days left, who else is in? 1.Joshuatrueanderson - 18" race system carbon fiber muffler with Flat Conical Billet End Cap + custom Area p jet kit + exhaust hanger bracket (black) 2.csmith12- Race Mid-High mount Full stainless steel system with 12" Stainless Steel Muffler 3.mikecronis - Full stainless steel system with 18" Carbon Fiber Muffler "Race system" 4.akima - full stainless steel mid-high mount race system with 18" Carbon Fiber Muffler 5.Stinub91- standard carbon fiber exhaust with the dynojet stage 2 kit 6.mariorivera830- 12" carbon fiber can, conical end cap, area p custom jet kit 7.sim80n- full stainless steel mid-high mount race system with 18" Carbon Fiber Muffler + Area P Customized Dynojet Kit #2193R 8.RacerX113 - Full Race Mid-High stainless steel system with 18" Carbon Fiber Muffler, Standard Dynojet Kit# 2193 - exhaust hanger bracket (black) 9.scoopshovelowski- Full race Mid-High stainless steel system with 18" Carbon Fiber Muffler, Standard Dynojet Kit# 2193 - exhaust hanger bracket (black) 10.diwhiteii- Full Race Mid-High stainless steel system with 18" Carbon fiber Muffler, exhaust hanger bracket (black) 11.dailowill- "Full Stainless Steel System, 18" Quiet Carbon Fiber Muffler"

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pre-Gen Parts, SF Bay Area	greenaero	Motorcycle-related	2	April 6th, 2014 10:42 AM
SF Bay Area Ninjetters invited for FE/fun runs 9/27-9/30	greenaero	Ride Reports	15	September 28th, 2013 04:29 PM
Area P - GB (for the 300!) Runs through March 31.	kbryant	Motorcycle-related	299	August 12th, 2013 08:25 PM
pre-gen runs rough under load	emoyer	1986 - 2007 Ninja 250R Tech Talk	76	February 16th, 2013 08:30 PM
GB- Area P New Gen Standard Exhaust	kkim	Motorcycle-related	49	November 1st, 2011 09:45 PM