Area P - GB (for the 300!) Runs through March 31.

[ninjamunky85]

I would also like the billet end cap with my system. Thanks

[diwhiteii]

1.S1att3r-Full carbon fiber muffler, FI micro tuner, passenger peg delete
2.Surferboy120-Full carbon Fiber muffler with quiet core, passenger peg delete, standard endcap
3.ninjamunky85-full carbon fiber muffler, billet end cap, micro tuner
4.xtrapsi- Full quiet core 18” Carbon Fiber Muffler, billet flat end cap, micro tuner
5.ionized- Full quiet core 18" Carbon Fiber with no decal, Rear Peg removing bracket
6.Hatesneezing- Full quiet core 18” carbon fiber muffler, billet flat endcap-no decal, FI Micro tuner
7.vanman69- ultra high mount stainless
8.Baja- Full quiet core 18” Carbon Fiber Muffler, flat billet end cap no logo. "Slanted A" mounting bracket. FI Micro Programmer
9.Felo- Full quiet core 18” carbon fiber muffler, FI micro tuner, "Slanted A" Solo bracket
10.Stablgr- ultra high mount carbon fiber, FI micro tuner

[Minikin_Jo]

I am interested in a new exhaust for the 300. I just learned about this today and did not read the entire thread. I am not on the site as much anymore and am not up to date. I only knew of this because I read the newsletter from @Alex.

I should add that I have no idea what 'type' of exhaust I want. Looking at the list above everyone wants something so specific. :-/

[S1att3r]

Originally Posted by Minikin_Jo

I am interested in a new exhaust for the 300. I just learned about this today and did not read the entire thread. I am not on the site as much anymore and am not up to date. I only knew of this because I read the newsletter from @Alex.

I should add that I have no idea what 'type' of exhaust I want. Looking at the list above everyone wants something so specific. :-/

Just read through the thread about the aera p exhaust under the 300 tech talk sub forum pictures and sound clips are on the 3rd page.

[diwhiteii]

Originally Posted by Minikin_Jo

I am interested in a new exhaust for the 300. I just learned about this today and did not read the entire thread. I am not on the site as much anymore and am not up to date. I only knew of this because I read the newsletter from @Alex.

I should add that I have no idea what 'type' of exhaust I want. Looking at the list above everyone wants something so specific. :-/

Check out the site then let me know what you want and I will add to the list.

http://areapnolimits.com/products/Sl...a-300-2013.php

[Rob1980]

Put me down for ultra high mount carbon fiber, and tuner

[diwhiteii]

1.S1att3r-Full carbon fiber muffler, FI micro tuner, passenger peg delete
2.Surferboy120-Full carbon Fiber muffler with quiet core, passenger peg delete, standard end cap
3.ninjamunky85-full carbon fiber muffler, billet flat end cap, FI micro tuner
4.xtrapsi- Full quiet core 18” Carbon Fiber Muffler, billet flat end cap, micro tuner
5.ionized- Full quiet core 18" Carbon Fiber, no decal, Rear Peg removing bracket
6.Hatesneezing- Full quiet core 18” carbon fiber muffler, flat billet end cap, no decal, FI Micro tuner
7.vanman69- ultra high mount stainless
8.Baja- Full quiet core 18” Carbon Fiber Muffler, flat billet end cap, no decal, "Slanted A" mounting bracket. FI Micro Programmer
9.Felo- Full quiet core 18” carbon fiber muffler, FI micro tuner, "Slanted A" Solo bracket
10.Stablgr- ultra high mount carbon fiber, FI micro tuner
11.Rob1980- ultra high mount carbon fiber, FI micro tuner

[vanman69]

gday mate, id like the billet end cap too

[diwhiteii]

1.S1att3r-Full carbon fiber muffler, FI micro tuner, passenger peg delete
2.Surferboy120-Full carbon Fiber muffler with quiet core, passenger peg delete, standard end-cap
3.ninjamunky85-full carbon fiber muffler, billet flat end-cap, FI micro tuner
4.xtrapsi- Full quiet core 18” Carbon Fiber Muffler, billet flat end-cap, micro tuner
5.ionized- Full quiet core 18" Carbon Fiber, no decal, Rear Peg removing bracket
6.Hatesneezing- Full quiet core 18” carbon fiber muffler, flat billet end-cap, no decal, FI Micro tuner
7.vanman69- ultra high mount stainless, billet end-cap
8.Baja- Full quiet core 18” Carbon Fiber Muffler, flat billet end-cap, no decal, "Slanted A" mounting bracket. FI Micro Programmer
9.Felo- Full quiet core 18” carbon fiber muffler, FI micro tuner, "Slanted A" Solo bracket
10.Stablgr- ultra high mount carbon fiber, FI micro tuner
11.Rob1980- ultra high mount carbon fiber, FI micro tuner

[Rob1980]

Could you also add a gasket for me as well

[stablgr]

Can you update mine with a billet end cap and no decal on the muffler please.

[Rob1980]

Is it necessary for us to keep posting additions, amendments to our orders on this thread? Since area p will contact us for order confirmation, tunes a d payment anyway....?

[Minikin_Jo]

I change my mind - if you were keeping a list please remove me.

[diwhiteii]

Originally Posted by Rob1980

Is it necessary for us to keep posting additions, amendments to our orders on this thread? Since area p will contact us for order confirmation, tunes a d payment anyway....?

Sorry Rob I was wrong, It is neccessary to keep posting additions ,so that Kerry has a break down of what everyone wants.

[diwhiteii]

Originally Posted by Minikin_Jo

I change my mind - if you were keeping a list please remove me.

Never had you down.

[felo]

Btw , i think you reuse the stock exhaust gaskets or they come with new ones ?

[Yakaru]

Alright, I guess it would be dumb of me to buy a new 250 instead of a 300 so I guess I need in on this. Quiet-long-core Carbon Fiber full system and the FI controller -- if I don't specify otherwise this fits on the standard passenger peg setup right? I want to keep those for my tail bag to lock on to.
Note: this is pending insurance and such panning out on the bike.

[diwhiteii]

Originally Posted by Rob1980

Could you also add a gasket for me as well

Full systems comes with gaskets one set is no additional charge, do you want another set?

[diwhiteii]

Originally Posted by felo

Btw , i think you reuse the stock exhaust gaskets or they come with new ones ?

They come with new ones

[diwhiteii]

Originally Posted by Yakaru

if I don't specify otherwise this fits on the standard passenger peg setup right?

Yes, all full systems except the ultra high mount retain the standard passenger peg.

[diwhiteii]

1.S1att3r-Full carbon fiber muffler, FI micro tuner, passenger peg delete
2.Surferboy120-Full carbon Fiber muffler with quiet core, passenger peg delete, standard end cap
3.ninjamunky85-full carbon fiber muffler, billet flat end cap, FI micro tuner
4.xtrapsi- Full quiet core 18” Carbon Fiber Muffler, billet flat end cap, micro tuner
5.ionized- Full quiet core 18" Carbon Fiber, no decal, Rear Peg removing bracket
6.Hatesneezing- Full quiet core 18” carbon fiber muffler, flat billet end cap, no decal, FI Micro tuner
7.vanman69- ultra high mount stainless, billet end-cap
8.Baja- Full quiet core 18” Carbon Fiber Muffler, flat billet end cap, no decal, "Slanted A" mounting bracket. FI Micro Programmer
9.Felo- Full quiet core 18” carbon fiber muffler, FI micro tuner, "Slanted A" Solo bracket
10.Stablgr- ultra high mount carbon fiber, FI micro tuner, billet end cap, no decal
11.Rob1980- ultra high mount carbon fiber, FI micro tuner
12.Yakaru- Full quiet-long-core Carbon Fiber full system, FI Micro tuner
13.diwhiteii- Full Ultra High Mount System, Standard Carbon Fiber Muffler

[felo]

Originally Posted by diwhiteii

Yes, all full systems except the ultra high mount retain the standard passenger peg.

you know, i gotta ask, why don't area p make a hi mount long quiet core exhaust? not enough space?

[diwhiteii]

Originally Posted by felo

why don't area p make a hi mount long quiet core exhaust? not enough space?

It would probably stick out to far past the tail end of the bike and would look funky.

[felo]

Originally Posted by diwhiteii

It would probably stick out to far past the tail end of the bike and would look funky.

i bet they would look like those 03 zx6r high mount micron exhaust

[Yakaru]

Another question because I love asking questions

I remember hearing (I may be wrong and/or hallucinating) that if we have an O2 sensor we can get a bung installed straight from AreaP instead of having to get it done third party -- is that correct? Any extra charge? By my understanding the 300 doesn't have a AFR sensor for the injectors and so to get the tuning dead on you would need to watch it yourself with your own external sensor.
Momaru has loaned me his AEM 30-4100 UEGO Controller (originally intended for my 250 RIP) and I'd love to have the AreaP come in a 'plug and play' kind of affair -- I bring this specific part up because I found this thread on a happenstance: http://www.ninjette.org/forums/showthread.php?t=75616 where it looks like his first bung was in an inaccessible location.

[Surferboy120]

Originally Posted by Yakaru

Another question because I love asking questions

I remember hearing (I may be wrong and/or hallucinating) that if we have an O2 sensor we can get a bung installed straight from AreaP instead of having to get it done third party -- is that correct? Any extra charge? By my understanding the 300 doesn't have a AFR sensor for the injectors and so to get the tuning dead on you would need to watch it yourself with your own external sensor.
Momaru has loaned me his AEM 30-4100 UEGO Controller (originally intended for my 250 RIP) and I'd love to have the AreaP come in a 'plug and play' kind of affair -- I bring this specific part up because I found this thread on a happenstance: http://www.ninjette.org/forums/showthread.php?t=75616 where it looks like his first bung was in an inaccessible location.

I would also be interested in having an O2 bung welded on with cap.

[diwhiteii]

Originally Posted by Yakaru

Another question because I love asking questions

I remember hearing (I may be wrong and/or hallucinating) that if we have an O2 sensor we can get a bung installed straight from AreaP instead of having to get it done third party -- is that correct? Any extra charge? By my understanding the 300 doesn't have a AFR sensor for the injectors and so to get the tuning dead on you would need to watch it yourself with your own external sensor.
Momaru has loaned me his AEM 30-4100 UEGO Controller (originally intended for my 250 RIP) and I'd love to have the AreaP come in a 'plug and play' kind of affair -- I bring this specific part up because I found this thread on a happenstance: http://www.ninjette.org/forums/showthread.php?t=75616 where it looks like his first bung was in an inaccessible location.

I know Area P has installed bungs before, if they still do that is up to Kerry. I had a bung welded in my stock system for my dynojet autotune. I had it welded in the place where the original non-us models weld theirs in. Both of my bikes uses a wideband O2 sensor and will need a new bung welded on to my new Area P systems. I spoke to Kerry about this a while ago, I know they were considering where would be a good place for the O2 sensor on the Ninja 300, but I haven't followed up with him on this topic. I will see what I can find out.

[diwhiteii]

Originally Posted by Yakaru

Another question because I love asking questions

I remember hearing (I may be wrong and/or hallucinating) that if we have an O2 sensor we can get a bung installed straight from AreaP instead of having to get it done third party -- is that correct? Any extra charge? By my understanding the 300 doesn't have a AFR sensor for the injectors and so to get the tuning dead on you would need to watch it yourself with your own external sensor.
Momaru has loaned me his AEM 30-4100 UEGO Controller (originally intended for my 250 RIP) and I'd love to have the AreaP come in a 'plug and play' kind of affair -- I bring this specific part up because I found this thread on a happenstance: http://www.ninjette.org/forums/showthread.php?t=75616 where it looks like his first bung was in an inaccessible location.

Answer to your question? Directly from the man himself: Kerry

"We are considering it as an option on the 300 systems. *It will be dependant on a single location. Once we determine the best location, there would not be any other optional locations available. We would then make this a permanent location on our fixtures/tooling."

"*The reason for one location only - We previously had issues with offering optional locations on the 250 systems and not being able to accurately determine exact locations by pictures from customers. So now on the 250 systems, we only offer the O2 Bung by itself."


1. "If we do offer this as an installed option - it will be a $45.00 "special order only" at the same time the exhaust is purchased. This will include a CNC'd from billet, 304 series, stainless steel O2 Bung and Tig Welded installation."

2. "If we do not offer it as an installed option - it will be a $25.00 option. This will include the CNC'd from billet, 304 series, stainless steel 02 Bung."

[Yakaru]

Originally Posted by diwhiteii

Answer to your question? Directly from the man himself: Kerry

"We are considering it as an option on the 300 systems. *It will be dependant on a single location. Once we determine the best location, there would not be any other optional locations available. We would then make this a permanent location on our fixtures/tooling."

"*The reason for one location only - We previously had issues with offering optional locations on the 250 systems and not being able to accurately determine exact locations by pictures from customers. So now on the 250 systems, we only offer the O2 Bung by itself."


1. "If we do offer this as an installed option - it will be a $45.00 "special order only" at the same time the exhaust is purchased. This will include a CNC'd from billet, 304 series, stainless steel O2 Bung and Tig Welded installation."

2. "If we do not offer it as an installed option - it will be a $25.00 option. This will include the CNC'd from billet, 304 series, stainless steel 02 Bung."

Awesome, I'll at least be picking the bung itself up -- if it's an installed option then I hope we can get a preview of where it is going to go for fit checks but clearly Kerry should just use the sensor I have as his test case

Thanks for checking into this.

[Rob1980]

Remove me please, I couldn't wait......

[diwhiteii]

1.S1att3r-Full carbon fiber muffler, FI micro tuner, passenger peg delete
2.Surferboy120-Full carbon Fiber muffler with quiet core, passenger peg delete, standard end cap
3.ninjamunky85-full carbon fiber muffler, billet flat end cap, FI micro tuner
4.xtrapsi- Full quiet core 18” Carbon Fiber Muffler, billet flat end cap, micro tuner
5.ionized- Full quiet core 18" Carbon Fiber, no decal, Rear Peg removing bracket
6.Hatesneezing- Full quiet core 18” carbon fiber muffler, flat billet end cap, no decal, FI Micro tuner
7.vanman69- ultra high mount stainless, billet end-cap
8.Baja- Full quiet core 18” Carbon Fiber Muffler, flat billet end cap, no decal, "Slanted A" mounting bracket. FI Micro Programmer
9.Felo- Full quiet core 18” carbon fiber muffler, FI micro tuner, "Slanted A" Solo bracket
10.Stablgr- ultra high mount carbon fiber, FI micro tuner, billet end cap, no decal
11.Yakaru- Full quiet-long-core Carbon Fiber full system, FI Micro tuner
12.diwhiteii- Full Ultra High Mount System, Standard Carbon Fiber Muffler

[ahamay]

Put me down for the Ultra High Mount Stainless and a FI Micro Programmer please.
I was wishy/washy about which system to go after but once I heard the sound clip for the High Mount I was sold.

[diwhiteii]

Originally Posted by ahamay

Put me down for the Ultra High Mount Stainless and a FI Micro Programmer please.
I was wishy/washy about which system to go after but once I heard the sound clip for the High Mount I was sold.

Got you down!

[diwhiteii]

1.S1att3r-Full carbon fiber muffler, FI micro tuner, passenger peg delete
2.Surferboy120-Full carbon Fiber muffler with quiet core, passenger peg delete, standard end cap
3.ninjamunky85-full carbon fiber muffler, billet flat end cap, FI micro tuner
4.xtrapsi- Full quiet core 18” Carbon Fiber Muffler, billet flat end cap, micro tuner
5.ionized- Full quiet core 18" Carbon Fiber, no decal, Rear Peg removing bracket
6.Hatesneezing- Full quiet core 18” carbon fiber muffler, flat billet end cap, no decal, FI Micro tuner
7.vanman69- ultra high mount stainless, billet end-cap
8.Baja- Full quiet core 18” Carbon Fiber Muffler, flat billet end cap, no decal, "Slanted A" mounting bracket. FI Micro Programmer
9.Felo- Full quiet core 18” carbon fiber muffler, FI micro tuner, "Slanted A" Solo bracket
10.Stablgr- ultra high mount carbon fiber, FI micro tuner, billet end cap, no decal
11.Yakaru- Full quiet-long-core Carbon Fiber full system, FI Micro tuner
12.diwhiteii- Full Ultra High Mount System, Standard Carbon Fiber Muffler
13.ahamay- Full Ultra High Mount System, Stainless muffler, FI Micro tuner

[ahamay]

^ Awesome sir, Thank you!

[goldenark]

alright, alright... Put me down for the full carbon fiber muffler, billet flat end cap, standard mount.

**edit**

Actually, nevermind. Turns out I owe Uncle Sam this year.

[ahamay]

Any word on how production is going? Just gotta say, DAMMIT MAN hurry the hell up!!!! I can only get by on sound clips for so long Kerry!!!!

[diwhiteii]

Originally Posted by ahamay

Any word on how production is going? Just gotta say, DAMMIT MAN hurry the hell up!!!! I can only get by on sound clips for so long Kerry!!!!

Patience Daniel son, all great things come to those that wait.

[joyspring]

hello David,

I'd like to be included in this group buy as well. I spoke with Kerry a couple days ago and I'm quite anxious for production as everyone else here is ;-)

Please include me for the following:

1. Accessory "Solo" Mounting Bracket, "Slanted A", Area P Systems
2. Area P/Fuel Moto FI Micro Programmer
3. Full Standard Mount System, Standard Carbon Fiber Muffler

Please advise if you require any additional information and thanks!

Robert

PS - Just to clarify, this is for the Ninja 300... thanks again!

[Bentley813]

Contemplating this deal. Cheapest shipping to 13126?