Hey Unregistered! Parting out TWO 2010 Ninja 250s - Page 4

stimpee · December 2nd, 2013, 08:40 PM

Maybe crazy question, but will ask since it would take me too long to piece together individual parts on the site.

How much would complete new-gen front end (upper and lower triple clamps, forks, wheel, axle, brakes - no clip-ons needed) and a complete rear end (swingarm, shock + linkage, wheel, axle, brake and brake stay) cost in a combo deal?

PartsNinja · December 3rd, 2013, 06:02 AM

Quote:

Originally Posted by stimpee

Maybe crazy question, but will ask since it would take me too long to piece together individual parts on the site.

How much would complete new-gen front end (upper and lower triple clamps, forks, wheel, axle, brakes - no clip-ons needed) and a complete rear end (swingarm, shock + linkage, wheel, axle, brake and brake stay) cost in a combo deal?

Hi,

Most of these parts are available on the site. All parts on our site already have their best prices listed and include FREE SHIPPING. We do not do package deals, nor will I fill up your cart and create an order for you. The website is very easy to use and that is why we created it.

-We do not currently have a good front wheel in stock, they usually are sold before we even take delivery of a new bike

-Upper triple clamps are USUALLY only sold as a complete lock set due to the fact that the ignition is factory security bolted (you have to drill them out) to underside of the triple tree.

-Not sure what you mean by "rear brake stay"

Sorry for the inconvenience.
Parts Ninja

PartsNinja · December 3rd, 2013, 06:09 AM

Quote:

Originally Posted by stimpee

Maybe crazy question, but will ask since it would take me too long to piece together individual parts on the site.

How much would complete new-gen front end (upper and lower triple clamps, forks, wheel, axle, brakes - no clip-ons needed) and a complete rear end (swingarm, shock + linkage, wheel, axle, brake and brake stay) cost in a combo deal?

The only way I would consider a "package deal" would be if you were picking the parts up at the shop (Houma, LA 70360), that way we could give you the savings of what it would cost to ship the parts (and we wouldnt have to ship).

PartsNinja · December 3rd, 2013, 04:53 PM

Quote:

Originally Posted by ramykandil

Hello, looking for a ninja 250 2008+ rearset with brake lever attached if possible. Please let me know ASAP - I just put an order in for a rear brake set-up, so if you have the rearset in stock you can ship them together, thanks ahead of time!

Hi there, I found your right rearset, its boxed up with your rear brake system. I ALSO THREW IN A 90% BRAKE LEVER FOR YOU.
Rearset is in good shape, just a little scudd on the end of the foot peg.
Please PayPal us $60 I'll get this sucker in the mail for you. I'll PM you the paypal address.

Thanks again!
-Dan

JohnnyBravo · December 3rd, 2013, 05:35 PM

Yay you got frame plugs

PartsNinja · December 3rd, 2013, 05:50 PM

Quote:

Originally Posted by JohnnyBravo

Yay you got frame plugs

I don't know offhand, I should know soon though. We should be picking up a few 300s soon. Can anyone chime in here?

JohnnyBravo · December 3rd, 2013, 05:54 PM

Quote:

Originally Posted by PartsNinja

I don't know offhand, I should know soon though. We should be picking up a few 300s soon. Can anyone chime in here?

I looked on your website... They look like the one I'm missing. Besides a person can never have to many parts

tfkrocks · December 4th, 2013, 02:41 AM

The frame plugs on the 250 and the 300 are the same. The part number on one pair of them is identical and I assume the other shouldn't really be so different that they won't work. I mean, the frames are nearly identical anyway.

JohnnyBravo · December 4th, 2013, 08:06 PM

Sweet, should have my plugs taken care of... Patting my foot till you start coming up with 300'z

Dmj_88 · December 6th, 2013, 08:16 AM

looking for a right side rearset for 08+ ninja 250, got anything?

PartsNinja · December 6th, 2013, 06:07 PM

Quote:

Originally Posted by Dmj_88

looking for a right side rearset for 08+ ninja 250, got anything?

I do believe there is one in the shop, i shall look for it tomorrow. Pricing will be around $60 with free shipping.

sfcmtz · December 14th, 2013, 11:46 AM

i guess i gotta ask then eh,

How much for a complete set of wheels? the 17s

PartsNinja · December 14th, 2013, 12:11 PM

Quote:

Originally Posted by sfcmtz

i guess i gotta ask then eh,

How much for a complete set of wheels? the 17s

Currently we do not have any front rims in stock. There is a rear rims listed on the site:
http://oemninjaparts.com/shop/rear-rim-3/

We do not negotiate prices, our best prices are listed on the site and all parts are very competitively priced. All listed prices include free shipping.

There should be a front rim or two available in the next week or two, but they sell very quickly.

agentbad · December 17th, 2013, 10:06 AM

Can you use newgen calipers on pregen bikes or is their an adapter plate to make them fit?

Major_Paine · December 17th, 2013, 10:28 AM

Quote:

Originally Posted by agentbad

Can you use newgen calipers on pregen bikes or is their an adapter plate to make them fit?

the fitment is different. the caliper holder is different. i have pre gen parts if thats what you need tho

ramykandil · December 21st, 2013, 10:51 PM

Heya! I'm looking for (all LEFT side)-
shifter + linkage (please include all bolts if possible), mirror, rearset with footpeg. Thanks ahead of time!

ramykandil · December 22nd, 2013, 03:54 PM

Partsninja/Dan has been AWESOME to work with. I've put my bike down twice now, yesterday being the second. The first time, I came through Dan to get a few parts that I needed and he had everything in great condition at fair prices. Parts shipped within a week, tracking number was provided, and everything came as pictured and functional. I have contacted him again after crashing yesterday, and he's found everything I need again at a fair price. His replies are lightning fast and very easy/friendly to work with. I'm a poor college student, so thank you for keeping me back on my bike Dan! I'll be making a post in the good sellers forum for this reputable man once I get my 25 posts and am eligible to post there =)!

PartsNinja · January 7th, 2014, 12:01 PM

ALRIGHT GUYS!
We just picked up 2 new 2008+ Ninja 250 parts bikes. I have all the goodies available now!
L&R Rearsets!
FRONT RIMS!
FRONT ROTORS!
MIRRORS!
TURN SIGNALS!

MOTORS MOTORS MOTORS! SOMEONE BUY SOME DARN MOTORS! $300-$500! INCLUDES SHIPPING!

Parts will start hitting the website in the next few days, dibs in this thread reserves your part until its ready to ship (NLT this weekend!). Check out the website! We also just bought a complete 2013 Ninja 300! Check the other thread for those parts!

Happy New Year!
www.OEMninjaparts.com

willis9076 · January 7th, 2014, 06:57 PM

What colors are the 2 new 250's that you just got? I might need a right faring and a right tail fender from a 2012 red SE.

PartsNinja · January 9th, 2014, 03:46 PM

Quote:

Originally Posted by willis9076

What colors are the 2 new 250's that you just got? I might need a right faring and a right tail fender from a 2012 red SE.

I have a green metallic (this seems to be the most dangerous color of all, I always take these bikes in wrecked) and a solid red. The body work is toast on the red and the metallic greens plastics look toasted too. I dont currently have any red SE bodywork available. Try back soon though!

InvisiBill · January 9th, 2014, 08:41 PM

I'm still looking for that spacer from the front wheel, if you've got one that can go separately.

Wheel bearing spacer (92152-0525 COLLAR,FR HUB,L=74.5)

PartsNinja · January 9th, 2014, 09:08 PM

Quote:

Originally Posted by InvisiBill

I'm still looking for that spacer from the front wheel, if you've got one that can go separately.

Wheel bearing spacer (92152-0525 COLLAR,FR HUB,L=74.5)

Sorry those are sold with our wheels unless the rim is too damaged to be reused.

infinitewhiskey · January 9th, 2014, 10:29 PM

I'm thinking about swapping a new gen rear end into my pre gen. Any discounts in purchasing most of the rear end off of a new gen? Rear axle, rim with rotors, swingarm, chain tension adjusters, maybe the rear brake assembly. Shipped to 92501.

michaelnewmex · January 10th, 2014, 01:32 PM

Dan, I'm looking for a spare set (front & rear) of rims, complete (preferably with rotors, sprockets, etc.), blue fuel tank & front fender for my '09 track 250. Wasn't sure if you've updated the website with new inventory yet? Shipping would be to 87732

Thanks in advance,

-Mike

cuong-nutz · January 10th, 2014, 05:12 PM

Dan, I know this is a long shot but do you have any 08-12 ninja 250 cylinders? I need one with an undamaged deck and base. I plan on overboring it so cylinder condition is not a problem unless it's deeply gouged.

PartsNinja · January 10th, 2014, 07:50 PM

Ok guys here are pics of the latest two 250s, sorry its taken me a bit to get back to questions today!

PartsNinja · January 10th, 2014, 07:54 PM

As you can see, the front and side fairings on both bikes are toast. The motor on the 2012 green bike is undamaged. I have 2 sets of rearsets, the front rim on the "red" bike is good aside from a slight 2 inch dent in the lip on the left side (tire holds are, more pics to follow), front rim on green bike is cracked and is scrap.

PartsNinja · January 10th, 2014, 07:55 PM

Quote:

Originally Posted by InvisiBill

I'm still looking for that spacer from the front wheel, if you've got one that can go separately.

Wheel bearing spacer (92152-0525 COLLAR,FR HUB,L=74.5)

Its your lucky day! The front rim on the green bike is cracked in half, so I can sell the bearing spacer to you. Ill get you a price tomorrow.

PartsNinja · January 10th, 2014, 07:58 PM

Quote:

Originally Posted by infinitewhiskey

I'm thinking about swapping a new gen rear end into my pre gen. Any discounts in purchasing most of the rear end off of a new gen? Rear axle, rim with rotors, swingarm, chain tension adjusters, maybe the rear brake assembly. Shipped to 92501.

Shipping is free on all of our orders, doesnt matter where in the US its being shipped to.

No discounts for large orders, however if you follow us on facebook (www.facebook.com/250parts) , we occasionally release coupons that can be used during checkout for discounts.

PartsNinja · January 10th, 2014, 08:06 PM

Quote:

Originally Posted by michaelnewmex

Dan, I'm looking for a spare set (front & rear) of rims, complete (preferably with rotors, sprockets, etc.), blue fuel tank & front fender for my '09 track 250. Wasn't sure if you've updated the website with new inventory yet? Shipping would be to 87732

Thanks in advance,

-Mike

Mike,
The website has not yet been updated with new inventory.

Shipping is always free to US orders.

We have this blue gas tank:
http://oemninjaparts.com/shop/gastank/
I do not have a blue fender.

Sprockets and carriers are here:
http://oemninjaparts.com/shop/rear-sprocket/
http://oemninjaparts.com/shop/sprocket-carrier/
http://oemninjaparts.com/shop/cush-drive/

I also have both front and rear rotors available (not yet listed on the site, should be by the end of the weekend)

The front rim on the "red" bike is good aside from a slight 2 inch dent in the lip, tire holds air, should be fine if its for a race bike, I have rear rims available.

PartsNinja · January 10th, 2014, 08:10 PM

Quote:

Originally Posted by cuong-nutz

Dan, I know this is a long shot but do you have any 08-12 ninja 250 cylinders? I need one with an undamaged deck and base. I plan on overboring it so cylinder condition is not a problem unless it's deeply gouged.

Cuong,
I have 5 motors now, and one could be parted out, it has a sheared off bolt from the clutch cover. I DO NOT however, have the time to disassemble the motor to remove the piston. If you want the complete motor (runs great just needs the broken off bolt to be extracted) I can do it for $300 shipped. That's the best I can offer right now sorry

PartsNinja · January 10th, 2014, 08:13 PM

Quote:

Originally Posted by Dmj_88

looking for a right side rearset for 08+ ninja 250, got anything?

I have 2 sets of rearsets available right now if still in need. $60 per side.

PartsNinja · January 10th, 2014, 08:14 PM

Quote:

Originally Posted by JohnnyBravo

Sweet, should have my plugs taken care of... Patting my foot till you start coming up with 300'z

Still need 300 frame plugs?

PartsNinja · January 10th, 2014, 08:16 PM

Quote:

Originally Posted by rjizzle36

Hi,

Would you also happen to have the footbrake pedal?

Brake pedal on the new green bike is good if you need one still.

PartsNinja · January 10th, 2014, 08:18 PM

Quote:

Originally Posted by Dmj_88

front wheel

The front wheel on the new "red" bike is good aside from a small 2 inch slight dent on the lip of the left side if you still need a front rim.

JohnnyBravo · January 10th, 2014, 09:15 PM

Quote:

Originally Posted by PartsNinja

Still need 300 frame plugs?

What's the price 15 bucks like the 250's? Ya darn right i do
What ya want for toasted fairings? Im a bit crazy, an darn good with 'glass

PartsNinja · January 11th, 2014, 01:04 AM

Quote:

Originally Posted by JohnnyBravo

What's the price 15 bucks like the 250's? Ya darn right i do
What ya want for toasted fairings? Im a bit crazy, an darn good with 'glass

Umm, I dont think anything is salvageable. Ill inspect further tomorrow. Side fairings are a royal pain to package, have to see if its worth my time to package and ship and still make some sort of profit. Ill poke around the shop tomorrow.

Do you just need side fairings and not the tail fairings? I have some good fixer-upper tail fairings.

Yes the frame plugs will be the same price as the 250s, who know, they might even be the same thing, Ill look tomorrow.

JohnnyBravo · January 11th, 2014, 08:24 AM

Quote:

Originally Posted by PartsNinja

Umm, I dont think anything is salvageable. Ill inspect further tomorrow. Side fairings are a royal pain to package, have to see if its worth my time to package and ship and still make some sort of profit. Ill poke around the shop tomorrow.

Do you just need side fairings and not the tail fairings? I have some good fixer-upper tail fairings.

Yes the frame plugs will be the same price as the 250s, who know, they might even be the same thing, Ill look tomorrow.

The plugs look the same, an I like how it has two of em with the dimples on that side... I only need one, but if I can replace all mine with dimpled ones I would have extras for the rouges an mishaps of life

I don't really need any bodywork so to speak, wouldn't mind havin it is more like it

kamanax · January 11th, 2014, 11:45 AM

I may be interested in a frame, no title, as long as it is in perfect mechanical condition.

PartsNinja · January 11th, 2014, 11:59 AM

Quote:

Originally Posted by kamanax

I may be interested in a frame, no title, as long as it is in perfect mechanical condition.

Yes! I have 3 frames that are in perfect shape. Let me know if you want to proceed, or if you need pictures. The bikes they came from were not crashed.

December 3rd, 2013, 05:35 PM	#125
JohnnyBravo Certifiable nontundrum Name: Harper Location: NC Milkshake stand Join Date: Mar 2013 Motorcycle(s): 2013 SE NINJA 300 Posts: Too much. MOTM - Sep '13, Sep '16	Yay you got frame plugs __________________________________________________

December 4th, 2013, 02:41 AM	#128
tfkrocks ninjette.org certified postwhore Name: Rebecca Location: SF Bay Area Join Date: Sep 2009 Motorcycle(s): 2013 Ninja 300 w/ ABS, 2014 NC700X, 2008 Ninja 250 (sold), 2002 Ninja 250 (sold) Posts: A lot. MOTM - Jan '18, Sep '13	The frame plugs on the 250 and the 300 are the same. The part number on one pair of them is identical and I assume the other shouldn't really be so different that they won't work. I mean, the frames are nearly identical anyway.
	1 out of 1 members found this post helpful.

December 4th, 2013, 08:06 PM	#129
JohnnyBravo Certifiable nontundrum Name: Harper Location: NC Milkshake stand Join Date: Mar 2013 Motorcycle(s): 2013 SE NINJA 300 Posts: Too much. MOTM - Sep '13, Sep '16	Sweet, should have my plugs taken care of... Patting my foot till you start coming up with 300'z __________________________________________________

January 7th, 2014, 12:01 PM	#138
PartsNinja Ninja Parts Master Name: Dan Location: Houma, Louisiana Join Date: Aug 2013 Motorcycle(s): 2011 Ducati Streetfighter 1098, 2014 Honda CB1100 Cafe, 2007 SV1000S, Quite a few 2008-2012 Ninja 250s Posts: 366	ALRIGHT GUYS! We just picked up 2 new 2008+ Ninja 250 parts bikes. I have all the goodies available now! L&R Rearsets! FRONT RIMS! FRONT ROTORS! MIRRORS! TURN SIGNALS! MOTORS MOTORS MOTORS! SOMEONE BUY SOME DARN MOTORS! $300-$500! INCLUDES SHIPPING! Parts will start hitting the website in the next few days, dibs in this thread reserves your part until its ready to ship (NLT this weekend!). Check out the website! We also just bought a complete 2013 Ninja 300! Check the other thread for those parts! Happy New Year! www.OEMninjaparts.com __________________________________________________ Add me on Instagram: @d_jalb Or follow me on eBay: PartsNinja

January 9th, 2014, 10:29 PM	#143
infinitewhiskey meh Name: Joe Location: SoCal Join Date: Apr 2013 Motorcycle(s): 2002 EX250F Cafe/Streetfighter Project Posts: 60	I'm thinking about swapping a new gen rear end into my pre gen. Any discounts in purchasing most of the rear end off of a new gen? Rear axle, rim with rotors, swingarm, chain tension adjusters, maybe the rear brake assembly. Shipped to 92501. __________________________________________________ SoCal 626/951 instagram \| youtube \| modifications

December 2nd, 2013, 08:40 PM	#121
stimpee ninjette.org member Name: Steve Location: Gallatin TN Join Date: Aug 2013 Motorcycle(s): 1 2005 Ninja EX250, 1 2008 Ninja 250, 1 2009 Ninja 250 Posts: 37	Maybe crazy question, but will ask since it would take me too long to piece together individual parts on the site. How much would complete new-gen front end (upper and lower triple clamps, forks, wheel, axle, brakes - no clip-ons needed) and a complete rear end (swingarm, shock + linkage, wheel, axle, brake and brake stay) cost in a combo deal?

December 6th, 2013, 08:16 AM	#130
Dmj_88 ninjette.org member Name: Drew Location: Midwest Join Date: Nov 2012 Motorcycle(s): Many Posts: 68	looking for a right side rearset for 08+ ninja 250, got anything?

December 14th, 2013, 11:46 AM	#132
sfcmtz ninjette.org newbie Name: nick Location: martinez ca Join Date: Dec 2013 Motorcycle(s): atk 605 Posts: 8	i guess i gotta ask then eh, How much for a complete set of wheels? the 17s

December 17th, 2013, 10:06 AM	#134
agentbad ninjette.org sage Name: bob Location: Earf Join Date: Apr 2013 Motorcycle(s): 2005 Ninja 250, 2006 SV650N Posts: 642	Can you use newgen calipers on pregen bikes or is their an adapter plate to make them fit?

December 21st, 2013, 10:51 PM	#136
ramykandil ninjette.org member Name: ramy Location: nova Join Date: Jun 2013 Motorcycle(s): 09 250 Posts: 18	Heya! I'm looking for (all LEFT side)- shifter + linkage (please include all bolts if possible), mirror, rearset with footpeg. Thanks ahead of time!

December 22nd, 2013, 03:54 PM	#137
ramykandil ninjette.org member Name: ramy Location: nova Join Date: Jun 2013 Motorcycle(s): 09 250 Posts: 18	Partsninja/Dan has been AWESOME to work with. I've put my bike down twice now, yesterday being the second. The first time, I came through Dan to get a few parts that I needed and he had everything in great condition at fair prices. Parts shipped within a week, tracking number was provided, and everything came as pictured and functional. I have contacted him again after crashing yesterday, and he's found everything I need again at a fair price. His replies are lightning fast and very easy/friendly to work with. I'm a poor college student, so thank you for keeping me back on my bike Dan! I'll be making a post in the good sellers forum for this reputable man once I get my 25 posts and am eligible to post there =)!

January 7th, 2014, 06:57 PM	#139
willis9076 ninjette.org member Name: Henry Location: Los Angeles Join Date: Oct 2012 Motorcycle(s): 2012 250R Posts: 37	What colors are the 2 new 250's that you just got? I might need a right faring and a right tail fender from a 2012 red SE.

January 9th, 2014, 08:41 PM	#141
InvisiBill EX500 full of EX250 parts Name: Bill Location: Grand Rapids-ish, MI Join Date: Jul 2012 Motorcycle(s): '18 Ninja 400 • '09 Ninja 500R (selling) • '98 VFR800 (project) • '85 Vulcan VN700 (sold) Posts: A lot. Blog Entries: 1 MOTM - Aug '15	I'm still looking for that spacer from the front wheel, if you've got one that can go separately. Wheel bearing spacer (92152-0525 COLLAR,FR HUB,L=74.5)

January 10th, 2014, 01:32 PM	#144
michaelnewmex ninjette.org newbie Name: Mike Location: Northern New Mexico Join Date: Sep 2013 Motorcycle(s): 2009 Ninja 250 (track bike), 2009 Attack Performance ZX-6R (track bike), 2011 BMW K1300S Posts: 2	Dan, I'm looking for a spare set (front & rear) of rims, complete (preferably with rotors, sprockets, etc.), blue fuel tank & front fender for my '09 track 250. Wasn't sure if you've updated the website with new inventory yet? Shipping would be to 87732 Thanks in advance, -Mike

January 10th, 2014, 05:12 PM	#145
cuong-nutz RIP Alex Name: Cuong Location: Houston, TX Join Date: Apr 2011 Motorcycle(s): '10 250r, '09 265r Posts: A lot. Blog Entries: 2	Dan, I know this is a long shot but do you have any 08-12 ninja 250 cylinders? I need one with an undamaged deck and base. I plan on overboring it so cylinder condition is not a problem unless it's deeply gouged. __________________________________________________ HalfFast Racing Team Serving Greater Houston Area Riders:WFO Riders MotoHouston HPC CMRA Ride Smart Fastline Lone Star Track Days

January 10th, 2014, 07:50 PM	#146
PartsNinja Ninja Parts Master Name: Dan Location: Houma, Louisiana Join Date: Aug 2013 Motorcycle(s): 2011 Ducati Streetfighter 1098, 2014 Honda CB1100 Cafe, 2007 SV1000S, Quite a few 2008-2012 Ninja 250s Posts: 366	Ok guys here are pics of the latest two 250s, sorry its taken me a bit to get back to questions today! __________________________________________________ Add me on Instagram: @d_jalb Or follow me on eBay: PartsNinja

January 10th, 2014, 07:54 PM	#147
PartsNinja Ninja Parts Master Name: Dan Location: Houma, Louisiana Join Date: Aug 2013 Motorcycle(s): 2011 Ducati Streetfighter 1098, 2014 Honda CB1100 Cafe, 2007 SV1000S, Quite a few 2008-2012 Ninja 250s Posts: 366	As you can see, the front and side fairings on both bikes are toast. The motor on the 2012 green bike is undamaged. I have 2 sets of rearsets, the front rim on the "red" bike is good aside from a slight 2 inch dent in the lip on the left side (tire holds are, more pics to follow), front rim on green bike is cracked and is scrap. __________________________________________________ Add me on Instagram: @d_jalb Or follow me on eBay: PartsNinja

January 11th, 2014, 11:45 AM	#159
kamanax ninjette.org newbie Name: kai Location: United States Join Date: Dec 2013 Motorcycle(s): 09 ninja 250r Posts: 5	I may be interested in a frame, no title, as long as it is in perfect mechanical condition.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Parting Out :: 08+ Ninja 250 Track/Race Bike	abhijitz	Motorcycle-related	14	May 10th, 2014 07:32 AM
Parting Out 1988 Ninja 250	Finesse	Motorcycle-related	19	April 17th, 2014 09:12 PM
Parting out a 2010 Green Special Edition	htdub	Motorcycle-related	14	October 6th, 2012 05:40 PM
[kropotkin thinks...] - Moto2 Bikes To Run In Spain In 2009, With 250s In 2010	Ninjette Newsbot	Motorcycling News	0	December 12th, 2008 11:00 AM