Area P - GB - 2015 (Feb 18 - Mar 6 - 2015) - Page 2

Ghostt · February 18th, 2015, 09:33 PM

No love for the PreGens

csmith12 · February 18th, 2015, 09:49 PM

Quote:

Originally Posted by Ghostt

No love for the PreGens

It's not that, it's just been posted before that the order amounts are not there to continue to support the tooling and resources required to fulfil one off orders every now and then.

As for mine hanging in the garage with 0 miles... I have a VERY neglected build thread on my pregen. It sits in the garage in boxes waiting on a few more parts that I am being very picky about. Mostly related to a newgen front and rear conversion that I will eventually get done, but in no rush to pay more than what I think is fair and when I am ready.

EsrTek · February 19th, 2015, 05:41 AM

Lol picturing Chris's front yard w bikes instead of cars

csmith12 · February 19th, 2015, 08:57 AM

Quote:

Originally Posted by EsrTek

Lol picturing Chris's front yard w bikes instead of cars

Sorry, the front yard is reserved for old cars, refrigerators and the occasional old sofa.

Sirref · February 19th, 2015, 08:59 AM

Quote:

Originally Posted by csmith12

Sorry, the front yard is reserved for old cars, refrigerators and the occasional sliding sofa.

Ftfy

LittleRedNinjette · February 19th, 2015, 09:01 AM

kbryant · February 19th, 2015, 09:52 AM

Quote:

Originally Posted by csmith12

It's not that, it's just been posted before that the order amounts are not there to continue to support the tooling and resources required to fulfil one off orders every now and then.

Bigballsofpaint · February 19th, 2015, 01:17 PM

Order List

Bigballsofpaint - 250 - 18'' carbon fiber - high mount - 2193R kit
AwDang - 250 - 18'' - ? - high mount
jschuster2 - 250 - 18'' - carbon fiber - high mount - 2193R kit

I updated it to include the jet kit, i figure ill put the money into tires for my trailer and car instead of doing EFI right now.

csmith12 · February 19th, 2015, 01:44 PM

Thank you Jay!

AwDang · February 23rd, 2015, 07:12 AM

I'm out
gonna have to live with what I have for awhile longer.

csmith12 · February 23rd, 2015, 07:42 AM

Quote:

Originally Posted by AwDang

I'm out
gonna have to live with what I have for awhile longer.

Order List:

Bigballsofpaint - 250 - 18'' carbon fiber - high mount - 2193R kit
jschuster2 - 250 - 18'' - carbon fiber - high mount - 2193R kit

ERA · February 23rd, 2015, 08:38 PM

Chris - I am interested in the 250 Standard Mount Full System with 12" carbon fiber muffler and 2193R Dynojet kit.

I know shipping is listed at $22.50 for continental US. I need a total quote (with shipping) to zip code 96753.

Would you mind getting the quote from Kerry?

If its reasonable, I'm in on the GB.

Mahaloz!

csmith12 · February 23rd, 2015, 09:12 PM

Sure thing E, stay tuned!

Bentley813 · February 23rd, 2015, 10:41 PM

I get compliments all the time on my long core I got from a previous GB, both on sound and looks. Don't miss out guys and girls.

csmith12 · February 24th, 2015, 11:23 AM

@ERA - I sent you a pm with the shipping quote request.

Welcome to ninjette!

Bigballsofpaint · February 26th, 2015, 08:20 PM

i feel like more people should need exhausts....

shereth · February 27th, 2015, 10:10 AM

I wish I could get in on this, but the timing sucks. Burned my spending cash on gearing up for my first trackday a couple of weeks ago, and now I've got my daughter's and wife's birthdays coming up in a couple of weeks.

I'll have to hope something like this crops up again later in the year

Seems like a great deal!

csmith12 · February 27th, 2015, 06:34 PM

Quote:

Originally Posted by LittleRedNinjette

Will the Juice Box i have work with this?

I had some extra time and wanted to revisit this, supporting ya'lls is what it's all about.

The bad news: The Juicebox is a discontinued product. (see attachment)

And for further completeness, the 4 Juicebox supplied n300 maps are labeled as follows;

0 = 2013 Kawasaki EX300 - Zero Map (base)
1 = 2013 Kawasaki EX300 - Stock exhaust Stock or aftermarket air filter
2 = 2013 Kawasaki EX300 - Two Brothers slip-on w/ Stock or aftermarket air filter
3 = 2013 Kawasaki EX300 - Two Brothers full exhaust w/ Stock air filter

I am not much of a betting man, but if I were... I would guess NONE of these maps will take full advantage of the full AreaP system. At best, a visit to the dyno would be in order to fab up a custom map or it kind of defeats the purpose of the exhaust in the first place.

Note: Their Top Tune software looks to have the ability to import Power Commander Maps only. This is a plus though, if the dyno uses a base PC n300 w/ AreaP map they should be able to tune it pretty well. Or... you're more than welcome to bite it off yourself.

From the cost perspective, just getting the AreaP box w/ a base map that has been pretty well vetted out by the exhaust vender (AreaP), is a better option.

ERA · February 27th, 2015, 08:12 PM

Ok Chris - as long as Kerry's invoice matches your "unofficial quote", I'm in!

To confirm: 250 Standard Mount Full System with 12" carbon fiber muffler and 2193R Dynojet kit.

Looks like that makes 3 total orders so far - would be great if we could get one more per day (up to offer end) to equal the 10 needed for a free drawing.

csmith12 · February 27th, 2015, 08:19 PM

Quote:

Originally Posted by ERA

Ok Chris - as long as Kerry's invoice matches your "unofficial quote", I'm in!

To confirm: 250 Standard Mount Full System with 12" carbon fiber muffler and 2193R Dynojet kit.

Looks like that makes 3 total orders so far - would be great if we could get one more per day (up to offer end) to equal the 10 needed for a free drawing.

Yes sir! My basic math skillz are KY taught, remember that!! hahahahahah

Order List:

Bigballsofpaint - 250 - 18'' carbon fiber - high mount - 2193R kit
jschuster2 - 250 - 18'' - carbon fiber - high mount - 2193R kit
ERA - 250 - 12'' - carbon fiber - standard mount - 2193R kit

csmith12 · February 27th, 2015, 08:31 PM

@LittleRedNinjette - I can post screenshots of the two bro's maps if you need. I have all the software/maps loaded and ready.

killerkeith · March 1st, 2015, 10:07 AM

Any idea what the shipping cost to Canada might be?

csmith12 · March 1st, 2015, 10:17 AM

Quote:

Originally Posted by killerkeith

Any idea what the shipping cost to Canada might be?

The last quote to Canada was $69.50 via USPS 7-10 days but we will need your postal code to get you a accurate quote.

killerkeith · March 1st, 2015, 10:21 AM

Quote:

Originally Posted by csmith12

The last quote to Canada was $69.50 via USPS 7-10 days but we will need your postal code to get you a accurate quote.

N3H5C3

csmith12 · March 1st, 2015, 10:23 AM

Thank you Keith, I will forward to Kerry for an accurate quote.

gantt · March 2nd, 2015, 07:48 AM

add me to the list for the high race mount, 18 inch carbon can and a dynojet kit for airbox delete. So, payment is due on the 6th, correct? Mid-High mount Carbon 18 inch system with billet end cap. Two flange gaskets. jet kit 2193R
I'm going to need Area P stickers too.

Bigballsofpaint · March 2nd, 2015, 09:33 AM

It better come with stickers!

csmith12 · March 2nd, 2015, 10:45 AM

Quote:

Originally Posted by killerkeith

N3H5C3

pm sent with shipping quote

Quote:

Originally Posted by Bigballsofpaint

It better come with stickers!

Oh yes.... always

csmith12 · March 2nd, 2015, 10:52 AM

Quote:

Originally Posted by gantt

add me to the list for the high race mount, 18 inch carbon can and a dynojet kit for airbox delete. So, payment is due on the 6th, correct? Mid-High mount Carbon 18 inch system with billet end cap. Two flange gaskets. jet kit 2193R
I'm going to need Area P stickers too.

Gantt, please review your list item and let me know if everything is correct. Please note that the billet endcap, mounting bracket (for high mount systems), a set of 2 port gaskets and stickers

are included at no extra charge, so I omitted them in the listing. Please alert me if you are needing to order a second of any item and I will ensure the order is correct.

Payment: Kerry normally sends out paypal invoices shortly after the GB and I send him the confirmed order list with paypal contact emails addresses and shipping information. Please let me know if you need anything else.

Thanks

Order List:

Bigballsofpaint - 250 - 18'' carbon fiber - high mount - 2193R kit
jschuster2 - 250 - 18'' - carbon fiber - high mount - 2193R kit
ERA - 250 - 12'' - carbon fiber - standard mount - 2193R kit
gantt - 250 - 18'' - carbon fiber - high mount - 2193R kit

gantt · March 2nd, 2015, 11:41 AM

Quote:

Originally Posted by csmith12

Gantt, please review your list item and let me know if everything is correct. Please note that the billet endcap, mounting bracket (for high mount systems), a set of 2 port gaskets and stickers

are included at no extra charge, so I omitted them in the listing. Please alert me if you are needing to order a second of any item and I will ensure the order is correct.
8'' carbon fiber - high mount - 2193R kit
jschuster2 - 250 - 18'' - carbon fiber - high mount - 2193R kit
ERA - 250 - 12'' - carbon fiber - standard mount - 2193R kit
gantt - 250 - 18'' - carbon fiber - high mount - 2193R kit

Looks good. I wasn't sure if the extras came with the kit or not. I don't need any extra stuff. But stickers. If it doesn't come with stickers, count me out. Lol

mindgam35_civic · March 2nd, 2015, 05:58 PM

i'm interested!

250 high mount 12" carbon with a jet kit... not sure which one though.

gantt · March 2nd, 2015, 06:43 PM

Quote:

Originally Posted by mindgam35_civic

i'm interested!

250 high mount 12" carbon with a jet kit... not sure which one though.

Carbon!!!^^^^

gantt · March 3rd, 2015, 06:58 PM

Quote:

Originally Posted by gantt

Carbon!!!^^^^

Dang, I just realized dude was saying he didn't know what jet kit. I was thinking at first carbon or ss. I feel stoopid now.

JohnnyBravo · March 3rd, 2015, 07:21 PM

I need a nother bike so I can buy another system... Yea they are that good

EsrTek · March 3rd, 2015, 07:22 PM

Either jet kit works...the more expensive one comes w more needle options... for the little bit of extra $$ it would better to have the options and not need them!!

proasian3 · March 3rd, 2015, 08:20 PM

I'm interested on the carbon high mount full pipe for ninja 300

csmith12 · March 3rd, 2015, 08:22 PM

Welcome Quan!

I got your message, give me a just a bit of time to work up a response and all will be good to go.

proasian3 · March 3rd, 2015, 08:50 PM

Quote:

Originally Posted by csmith12

Welcome Quan!

I got your message, give me a just a bit of time to work up a response and all will be good to go.

Thank you! 👌

csmith12 · March 4th, 2015, 08:03 AM

Sent you a pm @proasian3.

I sent you an estimated quote based on your registration zip code and I am feeling that it isn't the right one.

I will need your shipping address zip code to get accurate shipping numbers from Kerry.

Thanks

csmith12 · March 4th, 2015, 01:22 PM

Order List:

Bigballsofpaint - 250 - 18'' carbon fiber - high mount - 2193R kit
jschuster2 - 250 - 18'' - carbon fiber - high mount - 2193R kit
ERA - 250 - 12'' - carbon fiber - standard mount - 2193R kit
gantt - 250 - 18'' - carbon fiber - high mount - 2193R kit
proasian3 - 300 - Standard - carbon fiber - high mount

@proasian3 will you please review your line item on the order list and ensure that it is correct. If not, let me know please.

Thank you.

February 18th, 2015, 09:33 PM	#41
Ghostt in your machine Name: Scott Location: Summer Shade, Ky. Join Date: Oct 2014 Motorcycle(s): 98 Ninja 250/F12 aka ZX-2R "SERENITY", 91 Ninja 500/A5 aka ZX-5R "Phoenix", 84 Honda GL1200A "SIREN" Posts: A lot. Blog Entries: 25 MOTM - Jun '17, May '16, Mar '15	No love for the PreGens __________________________________________________ *violente et ignorantia* ZX-2R BLOG *Twitter and Instagram = Ghostt_Scott* *I'm not here to change your mind, just to inform.*

February 19th, 2015, 05:41 AM	#43
EsrTek ninjette.org certified postwhore Name: Eric Location: Murfreesboro, TN Join Date: Jun 2011 Motorcycle(s): '13 300 Posts: A lot.	Lol picturing Chris's front yard w bikes instead of cars __________________________________________________ My replies are intended for street riding only, plz do not provide track only replies. Visit my new MotoVlog Channel !!
	1 out of 1 members found this post helpful.

February 19th, 2015, 09:01 AM	#46
LittleRedNinjette Certified Troublemaker Name: Teri Location: Hamilton, NJ Join Date: Oct 2012 Motorcycle(s): 2006 Ninja 250r "Pikachu", 2017 Ninja 650 "Epona" Posts: A lot. MOTM - Aug '13, Aug '14, Feb '17	__________________________________________________ Raven's Rejuvenation A bruise is a lesson... and each lesson makes us better...
	1 out of 1 members found this post helpful.

February 19th, 2015, 01:44 PM	#49
csmith12 The Corner Whisperer Name: Chris (aka Reactor) Location: Northern KY Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much. MOTY 2015, MOTM - Nov '12, Nov '13	Thank you Jay! __________________________________________________ Goal: Shake A Million Hands \| Look through the corners \| Track Day Prep \| Closest track? \| The Mid-Ohio School

February 23rd, 2015, 08:38 PM	#52
ERA ninjette.org newbie Name: E Location: maui Join Date: Feb 2015 Motorcycle(s): 2011 Ninja 250 Posts: 3	Need a price quote to ship to Maui Chris - I am interested in the 250 Standard Mount Full System with 12" carbon fiber muffler and 2193R Dynojet kit. I know shipping is listed at $22.50 for continental US. I need a total quote (with shipping) to zip code 96753. Would you mind getting the quote from Kerry? If its reasonable, I'm in on the GB. Mahaloz!

February 19th, 2015, 01:17 PM	#48
Bigballsofpaint ninjette.org certified postwhore Name: Jay Location: CT Join Date: Apr 2011 Motorcycle(s): 2015 636 ABS - 69 Honda 305 Posts: A lot.	Order List Bigballsofpaint - 250 - 18'' carbon fiber - high mount - 2193R kit AwDang - 250 - 18'' - ? - high mount jschuster2 - 250 - 18'' - carbon fiber - high mount - 2193R kit I updated it to include the jet kit, i figure ill put the money into tires for my trailer and car instead of doing EFI right now.

February 23rd, 2015, 07:12 AM	#50
AwDang ninjette.org guru Name: Pat Location: SW VA Join Date: Feb 2015 Motorcycle(s): 286, 296, 599, 799 Posts: 436	I'm out gonna have to live with what I have for awhile longer.

February 23rd, 2015, 09:12 PM	#53
csmith12 The Corner Whisperer Name: Chris (aka Reactor) Location: Northern KY Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much. MOTY 2015, MOTM - Nov '12, Nov '13	Sure thing E, stay tuned! __________________________________________________ Goal: Shake A Million Hands \| Look through the corners \| Track Day Prep \| Closest track? \| The Mid-Ohio School

February 23rd, 2015, 10:41 PM	#54
Bentley813 ninjette.org member Name: Steve Location: Oswego, NY Join Date: Aug 2012 Motorcycle(s): 2013 White 300 Posts: 221	I get compliments all the time on my long core I got from a previous GB, both on sound and looks. Don't miss out guys and girls.

February 24th, 2015, 11:23 AM	#55
csmith12 The Corner Whisperer Name: Chris (aka Reactor) Location: Northern KY Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much. MOTY 2015, MOTM - Nov '12, Nov '13	@ERA - I sent you a pm with the shipping quote request. Welcome to ninjette! __________________________________________________ Goal: Shake A Million Hands \| Look through the corners \| Track Day Prep \| Closest track? \| The Mid-Ohio School

February 26th, 2015, 08:20 PM	#56
Bigballsofpaint ninjette.org certified postwhore Name: Jay Location: CT Join Date: Apr 2011 Motorcycle(s): 2015 636 ABS - 69 Honda 305 Posts: A lot.	i feel like more people should need exhausts....

February 27th, 2015, 10:10 AM	#57
shereth ninjette.org member Name: Alan Location: Phoenix Join Date: Jan 2014 Motorcycle(s): 2012 Kawasaki Ninja 250 Posts: 73	I wish I could get in on this, but the timing sucks. Burned my spending cash on gearing up for my first trackday a couple of weeks ago, and now I've got my daughter's and wife's birthdays coming up in a couple of weeks. I'll have to hope something like this crops up again later in the year Seems like a great deal!

February 27th, 2015, 08:12 PM	#59
ERA ninjette.org newbie Name: E Location: maui Join Date: Feb 2015 Motorcycle(s): 2011 Ninja 250 Posts: 3	Ok Chris - as long as Kerry's invoice matches your "unofficial quote", I'm in! To confirm: 250 Standard Mount Full System with 12" carbon fiber muffler and 2193R Dynojet kit. Looks like that makes 3 total orders so far - would be great if we could get one more per day (up to offer end) to equal the 10 needed for a free drawing.

February 27th, 2015, 08:31 PM	#61
csmith12 The Corner Whisperer Name: Chris (aka Reactor) Location: Northern KY Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much. MOTY 2015, MOTM - Nov '12, Nov '13	@LittleRedNinjette - I can post screenshots of the two bro's maps if you need. I have all the software/maps loaded and ready. __________________________________________________ Goal: Shake A Million Hands \| Look through the corners \| Track Day Prep \| Closest track? \| The Mid-Ohio School

March 1st, 2015, 10:07 AM	#62
killerkeith ninjette.org member Name: Keith Location: Waterloo Join Date: Aug 2011 Motorcycle(s): Ninja 250 Posts: 32	Any idea what the shipping cost to Canada might be? __________________________________________________ Start>2008CBR125R>2007Ninja650R>2008BWS50>2007Ninja650R>2009Ninja250R>2009Versys 650>2009Ninja250 ST EditionCurrent

March 1st, 2015, 10:23 AM	#65
csmith12 The Corner Whisperer Name: Chris (aka Reactor) Location: Northern KY Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much. MOTY 2015, MOTM - Nov '12, Nov '13	Thank you Keith, I will forward to Kerry for an accurate quote. __________________________________________________ Goal: Shake A Million Hands \| Look through the corners \| Track Day Prep \| Closest track? \| The Mid-Ohio School

March 2nd, 2015, 07:48 AM	#66
gantt ninjette.org sage Name: michael Location: Central Georgia Join Date: May 2013 Motorcycle(s): 2019 Ninja 400, Sold 2012 Ninja 650, Sold 2009 Ninja 250r, Sold 2007 DRZ400s Posts: 628	add me to the list for the high race mount, 18 inch carbon can and a dynojet kit for airbox delete. So, payment is due on the 6th, correct? Mid-High mount Carbon 18 inch system with billet end cap. Two flange gaskets. jet kit 2193R I'm going to need Area P stickers too. Last futzed with by gantt; March 2nd, 2015 at 08:27 AM. Reason: poor grammer

March 2nd, 2015, 09:33 AM	#67
Bigballsofpaint ninjette.org certified postwhore Name: Jay Location: CT Join Date: Apr 2011 Motorcycle(s): 2015 636 ABS - 69 Honda 305 Posts: A lot.	It better come with stickers!

March 2nd, 2015, 05:58 PM	#71
mindgam35_civic ninjette.org member Name: Generali Location: South Central Ky Join Date: Mar 2010 Motorcycle(s): gy6 ruckus, ninja 250r Posts: 16	i'm interested! 250 high mount 12" carbon with a jet kit... not sure which one though.

March 3rd, 2015, 07:21 PM	#74
JohnnyBravo Certifiable nontundrum Name: Harper Location: NC Milkshake stand Join Date: Mar 2013 Motorcycle(s): 2013 SE NINJA 300 Posts: Too much. MOTM - Sep '13, Sep '16	I need a nother bike so I can buy another system... Yea they are that good __________________________________________________

March 3rd, 2015, 07:22 PM	#75
EsrTek ninjette.org certified postwhore Name: Eric Location: Murfreesboro, TN Join Date: Jun 2011 Motorcycle(s): '13 300 Posts: A lot.	Either jet kit works...the more expensive one comes w more needle options... for the little bit of extra $$ it would better to have the options and not need them!! __________________________________________________ My replies are intended for street riding only, plz do not provide track only replies. Visit my new MotoVlog Channel !!

March 3rd, 2015, 08:20 PM	#76
proasian3 ninjette.org member Name: Quan Location: Cypress Join Date: Mar 2015 Motorcycle(s): Ninja 300 (our endurance bike), Cbr1000, my son has a cbr600 Posts: 12	I'm interested on the carbon high mount full pipe for ninja 300

March 3rd, 2015, 08:22 PM	#77
csmith12 The Corner Whisperer Name: Chris (aka Reactor) Location: Northern KY Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much. MOTY 2015, MOTM - Nov '12, Nov '13	Welcome Quan! I got your message, give me a just a bit of time to work up a response and all will be good to go. __________________________________________________ Goal: Shake A Million Hands \| Look through the corners \| Track Day Prep \| Closest track? \| The Mid-Ohio School

March 4th, 2015, 08:03 AM	#79
csmith12 The Corner Whisperer Name: Chris (aka Reactor) Location: Northern KY Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much. MOTY 2015, MOTM - Nov '12, Nov '13	Sent you a pm @proasian3. I sent you an estimated quote based on your registration zip code and I am feeling that it isn't the right one. I will need your shipping address zip code to get accurate shipping numbers from Kerry. Thanks __________________________________________________ Goal: Shake A Million Hands \| Look through the corners \| Track Day Prep \| Closest track? \| The Mid-Ohio School

March 4th, 2015, 01:22 PM	#80
csmith12 The Corner Whisperer Name: Chris (aka Reactor) Location: Northern KY Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much. MOTY 2015, MOTM - Nov '12, Nov '13	Order List: Bigballsofpaint - 250 - 18'' carbon fiber - high mount - 2193R kit jschuster2 - 250 - 18'' - carbon fiber - high mount - 2193R kit ERA - 250 - 12'' - carbon fiber - standard mount - 2193R kit gantt - 250 - 18'' - carbon fiber - high mount - 2193R kit proasian3 - 300 - Standard - carbon fiber - high mount @proasian3 will you please review your line item on the order list and ensure that it is correct. If not, let me know please. Thank you. __________________________________________________ Goal: Shake A Million Hands \| Look through the corners \| Track Day Prep \| Closest track? \| The Mid-Ohio School

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[motorcycle-usa.com] - 2015 Amateur National MX Area Qualifiers Start	Ninjette Newsbot	Motorcycling News	0	February 13th, 2015 05:50 AM
[motorcyclenews.com - sport] - Dean Harrison remains with Mar-Train Yamaha for 2015	Ninjette Newsbot	Motorcycling News	0	November 6th, 2014 11:40 AM
[motorcyclenews.com - sport] - Dean Harrison remains with Mar-Train Yamaha for 2015	Ninjette Newsbot	Motorcycling News	0	November 6th, 2014 05:21 AM
[roadracingworld.com] - Mar-Train Racing Taking "Sabbatical" From 2015 British Supers	Ninjette Newsbot	Motorcycling News	0	September 26th, 2014 05:50 PM
[roadracingworld.com] - John Brittten Tribute Scheduled For Feb. 21-22, 2015, In New	Ninjette Newsbot	Motorcycling News	0	September 5th, 2014 10:10 AM