Those with projector headlight(s)..

paterick4o8 · September 12th, 2009, 10:59 AM

I was wondering how you were able to successfully mount and install these on the new gen. I am currently running HIDs in the stock reflective housing, and although they are better than the stocks IMO, and bright, I prefer not to blind other vehicles.

Also I'd like to have the low bean more concentrated to the ground especially I'm riding at night.

Any help here?

kkim · September 12th, 2009, 11:01 AM

have you tried adjusting the aiming of the headlight? made a world of difference for my bike.

Ken08Ninja · September 12th, 2009, 03:30 PM

I installed these projectors http://xebritehidsystems.webs.com/bprsystem.htm in my '08. I had to enlarge the hole in the stock reflector so the projectors would not stick out too far. I have just enough room to aim them, the projector glass is just touching the stock lens cover.
I also made new spacers so the projector was more stable in the reflector housing, the supplied washer was not enough the projector was able to wobble.
The whole process was a pain, the headlight housing was difficult to seperate, the projectors are too long for are housing and the supplied sealant never hardened so I had to remove it all and I used clear caulk to seal the housing.
If I had to do it again I would see if Ztrack could get the projector headlight that was posted before.

ztrack157 · September 12th, 2009, 03:47 PM

Still working on those ken. This is where I'm at. Well actually it should be done tonight.

Ken08Ninja · September 12th, 2009, 05:33 PM

Quote:

Originally Posted by ztrack157

Still working on those ken. This is where I'm at. Well actually it should be done tonight.

Not that setup, you posted in this thread http://www.ninjette.org/forums/showt...ght=angel+eyes

Quote:

Originally Posted by ztrack157

Ya they do. They don't make their own stuff though. Anything you see on their sight I can get made.

ztrack157 · September 12th, 2009, 06:50 PM

I know that. I was just showing what I was doing with mine. Should have clarified more

paterick4o8 · September 12th, 2009, 11:55 PM

Quote:

Originally Posted by kkim

have you tried adjusting the aiming of the headlight? made a world of difference for my bike.

Yup I've adjusted them to reach a comfortable distance for night riding. This was the first thing I considered before thinking about going projector

Quote:

Originally Posted by ztrack157

Still working on those ken. This is where I'm at. Well actually it should be done tonight.

Hmm I kind of like this set up with the race fairings and 1 projector headlight in the middle. I've seen a couple bikes in my area, a GSX-R & a SV600 with this. It's nice and convenient for those trackheads who also ride street

September 12th, 2009, 10:59 AM	#1
paterick4o8 ninjette.org sage Name: patricK Location: San Jose, CA--BAY AREA! Join Date: Mar 2009 Motorcycle(s): '08 blue 250R [sold]. '09 lime ZX-6R [stolen :( ]. '06 blue 636. Posts: 918	Those with projector headlight(s).. I was wondering how you were able to successfully mount and install these on the new gen. I am currently running HIDs in the stock reflective housing, and although they are better than the stocks IMO, and bright, I prefer not to blind other vehicles. Also I'd like to have the low bean more concentrated to the ground especially I'm riding at night. Any help here?

September 12th, 2009, 06:50 PM	#6
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	I know that. I was just showing what I was doing with mine. Should have clarified more __________________________________________________ Sportisimoto USA is born.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
projector headlight....???	SayWat?	2008 - 2012 Ninja 250R Tech Talk	20	June 5th, 2010 06:43 PM

September 12th, 2009, 11:01 AM	#2
kkim Join Date: Nov 2008 Posts: Too much.	have you tried adjusting the aiming of the headlight? made a world of difference for my bike.

September 12th, 2009, 03:30 PM	#3
Ken08Ninja ninjette.org member Name: Ken Location: NY Join Date: Dec 2008 Motorcycle(s): 08 Ninja 250R Candy Plasma Blue Posts: 129	I installed these projectors http://xebritehidsystems.webs.com/bprsystem.htm in my '08. I had to enlarge the hole in the stock reflector so the projectors would not stick out too far. I have just enough room to aim them, the projector glass is just touching the stock lens cover. I also made new spacers so the projector was more stable in the reflector housing, the supplied washer was not enough the projector was able to wobble. The whole process was a pain, the headlight housing was difficult to seperate, the projectors are too long for are housing and the supplied sealant never hardened so I had to remove it all and I used clear caulk to seal the housing. If I had to do it again I would see if Ztrack could get the projector headlight that was posted before.