Shinto USA order for September - Page 3

nattygirl · September 28th, 2010, 02:21 PM

So bummed.... anyone else not getting their order yet?

want1sobad · September 28th, 2010, 02:28 PM

Quote:

Originally Posted by nattygirl

So bummed.... anyone else not getting their order yet?

its the OEM seat cowls as well, apparently it is a PIA for Paul to get them from the local kawi dealer, which is why he will be offering a Shinto cowl soon. don't worry, everyone will get their order.

250rStar · September 28th, 2010, 03:45 PM

am I the only one who ordered clip-ons?

drumm3r9 · September 28th, 2010, 03:58 PM

Hey vince,
Didn't get an email with my tracking......can you shoot me a pm with it bro? thanks!

want1sobad · September 28th, 2010, 04:38 PM

Quote:

Originally Posted by 250rStar

am I the only one who ordered clip-ons?

7 clip-ons were ordered (four as kits) - all en route to their owners

want1sobad · September 28th, 2010, 04:41 PM

Quote:

Originally Posted by drumm3r9

Hey vince,
Didn't get an email with my tracking......can you shoot me a pm with it bro? thanks!

pm sent

Godzilla35 · September 28th, 2010, 09:17 PM

question about the koso gauge accessory volt gauge... can this be substituted with a temp gauge? wouldn't that do us more good? and would it be a hard retro fit?

sorry if this is too off topic... but I'm saving up to order a bunch of parts from you...

randomwalk101 · September 28th, 2010, 09:19 PM

Doesn't koso has the temp gauge built-in already?

Godzilla35 · September 28th, 2010, 09:48 PM

Quote:

Originally Posted by randomwalk101

Doesn't koso has the temp gauge built-in already?

Does it? I just bought my 250 today so... yeah, i'm a noob haha, asking noob questions.

want1sobad · September 29th, 2010, 05:48 AM

eddie,

thank you for your interest and future business! regarding technical questions on the koso gauges (as i have no first-hand experience with them myself) i would suggest you contact koso directly. that being said, several members on the forum have the rx2 gauge and i'm sure they could provide some insight.

search "koso"

i look forward to hearing from you in the future!

dubojr1 · September 29th, 2010, 06:00 AM

Quote:

Originally Posted by randomwalk101

Doesn't koso has the temp gauge built-in already?

Yes both KOSO models for our bikes have the temp. reading.

want1sobad · September 29th, 2010, 06:02 AM

jd to the rescue! thanks

dubojr1 · September 29th, 2010, 06:27 AM

Their catalog for those interested...

http://www.kosonorthamerica.com/

Godzilla35 · September 29th, 2010, 08:48 AM

Okay. I'll try searching haha but thanks for not flaming

want1sobad · September 30th, 2010, 11:23 AM

checking on tracking - most everyone should be receiving their items today/tomorrow. please post feedback, pics, installation diys, and post install pictures - thank you!

also, anyone looking to get in on next shipment needs to let me know asap. will accept payment as late as 10/8.

Jerkson · September 30th, 2010, 11:27 AM

Quote:

Originally Posted by want1sobad

checking on tracking - most everyone should be receiving their items today/tomorrow. please post feedback, pics, installation diys, and post install pictures - thank you!

also, anyone looking to get in on next shipment needs to let me know asap. will accept payment as late as 10/8.

Mine wont arrive till next week

illrational · September 30th, 2010, 12:02 PM

Quote:

Originally Posted by want1sobad

checking on tracking - most everyone should be receiving their items today/tomorrow. please post feedback, pics, installation diys, and post install pictures - thank you!

also, anyone looking to get in on next shipment needs to let me know asap. will accept payment as late as 10/8.

Hopefully will some up later , just not how good theyll be considering might be dark by the tim ei finish installing everything

randomwalk101 · September 30th, 2010, 12:28 PM

there is a Sato Diy which is same exact design as Shinto.

illrational · September 30th, 2010, 12:32 PM

Quote:

Originally Posted by want1sobad

Rearsets: http://www.youtube.com/watch?v=JsItO8w_IcA

Clip-ons (note this is for woodcraft, but Shinto clip-ons install in the same manner): http://www.ninjette.org/forums/showp...38&postcount=2, and http://www.ninjette.org/forums/showp...39&postcount=3

Do we get free loctite also?

illrational · September 30th, 2010, 12:46 PM

Quote:

Originally Posted by randomwalk101

there is a Sato Diy which is same exact design as Shinto.

Does the shinto's also come with a pressure switch for teh brake light?I just read through the DIY for SATO.

randomwalk101 · September 30th, 2010, 02:12 PM

Sato $450
Shinto $200? (or somewhere there)...

so the answer is no. But $200 +$15 parts = $215 or so stilll way ahead.

250rStar · September 30th, 2010, 03:53 PM

so do the clipons come with the hole predrilled for the swith assembly or is it like the woodcrafts?

250rStar · September 30th, 2010, 07:17 PM

ok sounds good gotta go buy a punch and a drill bit tomorrow

illrational · October 1st, 2010, 06:52 AM

Quote:

Originally Posted by want1sobad

well said john, thanks for providing some insight....

Some real insight would be an explanation of how he is able to use rear brake light with the rearset....THAT WOULD BE INSIGHTFUL!!!!!!!

randomwalk101 · October 1st, 2010, 07:10 AM

Quote:

Originally Posted by illrational

Some real insight would be an explanation of how he is able to use rear brake light with the rearset....THAT WOULD BE INSIGHTFUL!!!!!!!

by installing the pressure switch like in the DIY (and you mentioned it yourself in post #101). Switch needs to be purchased separately (mentioned in a few posts above)..
at work right now..can't take pics...

randomwalk101 · October 1st, 2010, 07:11 AM

cheapest pressure switch I found (and purchased) is at pegasus racing...The connector is direct plug in to stock so no hacking like in the Sato DIY.

illrational · October 1st, 2010, 07:32 AM

Quote:

Originally Posted by randomwalk101

by installing the pressure switch like in the DIY (and you mentioned it yourself in post #101). Switch needs to be purchased separately (mentioned in a few posts above)..
at work right now..can't take pics...

I didnt realize i had to buy a pressure switch i assumed you used teh oem hardware...the pics will be appreciated when you get teh chance, thanks!!

randomwalk101 · October 1st, 2010, 07:39 AM

you can prob use the stock rear brake light switch and hack up something to mount it but I figure it's much cleaner to install the pressure switch and it plugs right in...I think it's like only $12...

dubojr1 · October 1st, 2010, 08:16 AM

Guys, guys. I believe Vince has already expressed to Ryan that this is not a tech thread. Please delete these post and move them to a tech thread or the farkles one Ryan already started. Others may be interested in this information but would never look in "market place" to find it.

Thanks!

http://www.ninjette.org/forums/showthread.php?t=56815

250rStar · October 2nd, 2010, 07:53 PM

Liquidtoon · October 2nd, 2010, 10:06 PM

That sure looks nice BUT ya know what would make it sexier?
If it was RED!!!

want1sobad · October 3rd, 2010, 07:47 AM

josh, tony - thanks so much for getting these install pics posted! everything looks great

any feedback for potential customers?

250rStar · October 3rd, 2010, 12:30 PM

good product pretty easy to install just wish the holes for the controls would be predrilled kinda sucked to do it myself but it was worth it!!!!!!!

want1sobad · October 3rd, 2010, 05:58 PM

deadline for orders is this friday! lets get 'em in people

currentsea · October 4th, 2010, 02:00 PM

payment sent, when are these orders shipping?

want1sobad · October 4th, 2010, 02:24 PM

hoping paul will have everything together by the 29th. i will make every effort to have individual orders delivered shortly thereafter - early november at the latest.

updates will be forthcoming.

drumm3r9 · October 4th, 2010, 03:04 PM

vince as far as chains what do you have? can you anodize the sprocket cover? i love the fork caps i got!!!!!!! i want to order the items mentioned before this fridays order deadline

drumm3r9 · October 4th, 2010, 03:06 PM

also want some levers....can you give me any deal on the cover, levers and chain??

want1sobad · October 4th, 2010, 03:31 PM

kyle, you have a pm

keeyu · October 5th, 2010, 11:01 AM

Too late for the angled risers?

September 28th, 2010, 02:21 PM	#81
nattygirl ninjette.org guru Name: Natalie Location: La Puente, CA Join Date: May 2010 Motorcycle(s): 2010 Kawasaki Ninja EX250 Special Edition Red/Black Posts: 455	So bummed.... anyone else not getting their order yet? __________________________________________________ '10 Ninja 250R SE Red/Blk Mods: Projekt D FE, Protons, HB Blk Windscreen, HIDs, TBR Blk Series Slip-On, Shogun Sliders, Solo Cowl, Integrated Tail Light, Gls Blk Rear Fender, Red Accents

September 28th, 2010, 03:45 PM	#83
250rStar super ninja Name: TJ Location: Sacramento Join Date: Feb 2010 Motorcycle(s): 2009 kawasaki 250r Posts: 127	am I the only one who ordered clip-ons? __________________________________________________ 2009 Ninja 250r aftermarket parts HotBodies double bubble Swing Arm Sliders Sylvania Sliverstar Ultra Akrapovic Slip-on Shinto Clip-Ons/Grips/Bar Ends

September 29th, 2010, 06:27 AM	#93
dubojr1 ninjette.org certified postwhore Name: Jason Location: Jacksonville, Florida Join Date: May 2010 Motorcycle(s): 09 Ninja 250R SE, 07 Honda CRF230F, 06 Honda CRF150F Posts: A lot.	Their catalog for those interested... http://www.kosonorthamerica.com/ __________________________________________________ 09 250R SE: Paying it forward one post at a time! Don't forget to add yourself to our Member Map

September 30th, 2010, 03:53 PM	#102
250rStar super ninja Name: TJ Location: Sacramento Join Date: Feb 2010 Motorcycle(s): 2009 kawasaki 250r Posts: 127	so do the clipons come with the hole predrilled for the swith assembly or is it like the woodcrafts? __________________________________________________ 2009 Ninja 250r aftermarket parts HotBodies double bubble Swing Arm Sliders Sylvania Sliverstar Ultra Akrapovic Slip-on Shinto Clip-Ons/Grips/Bar Ends

September 30th, 2010, 07:17 PM	#103
250rStar super ninja Name: TJ Location: Sacramento Join Date: Feb 2010 Motorcycle(s): 2009 kawasaki 250r Posts: 127	ok sounds good gotta go buy a punch and a drill bit tomorrow __________________________________________________ 2009 Ninja 250r aftermarket parts HotBodies double bubble Swing Arm Sliders Sylvania Sliverstar Ultra Akrapovic Slip-on Shinto Clip-Ons/Grips/Bar Ends

September 28th, 2010, 03:58 PM	#84
drumm3r9 ninjette.org member Name: Kyle Location: Silver City Join Date: Jul 2009 Motorcycle(s): Kawasaki Ninja 250r Posts: 79	Hey vince, Didn't get an email with my tracking......can you shoot me a pm with it bro? thanks!

September 28th, 2010, 09:17 PM	#87
Godzilla35 ninjette.org member Name: poop Location: San Diego, California Join Date: Sep 2010 Motorcycle(s): Nike Hyperdunks Posts: 116	question about the koso gauge accessory volt gauge... can this be substituted with a temp gauge? wouldn't that do us more good? and would it be a hard retro fit? sorry if this is too off topic... but I'm saving up to order a bunch of parts from you...

September 28th, 2010, 09:19 PM	#88
randomwalk101 self wrencher Name: john Location: houston Join Date: Dec 2008 Motorcycle(s): 08 250r and 07 600r Posts: A lot.	Doesn't koso has the temp gauge built-in already?

September 29th, 2010, 05:48 AM	#90
want1sobad Ninjette CPT Name: Vince Location: jacksonville, fl Join Date: May 2009 Motorcycle(s): Black 08 250r Posts: A lot.	eddie, thank you for your interest and future business! regarding technical questions on the koso gauges (as i have no first-hand experience with them myself) i would suggest you contact koso directly. that being said, several members on the forum have the rx2 gauge and i'm sure they could provide some insight. search "koso" i look forward to hearing from you in the future!

September 29th, 2010, 06:02 AM	#92
want1sobad Ninjette CPT Name: Vince Location: jacksonville, fl Join Date: May 2009 Motorcycle(s): Black 08 250r Posts: A lot.	jd to the rescue! thanks

September 29th, 2010, 08:48 AM	#94
Godzilla35 ninjette.org member Name: poop Location: San Diego, California Join Date: Sep 2010 Motorcycle(s): Nike Hyperdunks Posts: 116	Okay. I'll try searching haha but thanks for not flaming

September 30th, 2010, 11:23 AM	#95
want1sobad Ninjette CPT Name: Vince Location: jacksonville, fl Join Date: May 2009 Motorcycle(s): Black 08 250r Posts: A lot.	checking on tracking - most everyone should be receiving their items today/tomorrow. please post feedback, pics, installation diys, and post install pictures - thank you! also, anyone looking to get in on next shipment needs to let me know asap. will accept payment as late as 10/8.

September 30th, 2010, 12:28 PM	#98
randomwalk101 self wrencher Name: john Location: houston Join Date: Dec 2008 Motorcycle(s): 08 250r and 07 600r Posts: A lot.	there is a Sato Diy which is same exact design as Shinto.

September 30th, 2010, 02:12 PM	#101
randomwalk101 self wrencher Name: john Location: houston Join Date: Dec 2008 Motorcycle(s): 08 250r and 07 600r Posts: A lot.	Sato $450 Shinto $200? (or somewhere there)... so the answer is no. But $200 +$15 parts = $215 or so stilll way ahead.

October 1st, 2010, 07:11 AM	#106
randomwalk101 self wrencher Name: john Location: houston Join Date: Dec 2008 Motorcycle(s): 08 250r and 07 600r Posts: A lot.	cheapest pressure switch I found (and purchased) is at pegasus racing...The connector is direct plug in to stock so no hacking like in the Sato DIY.

October 1st, 2010, 07:39 AM	#108
randomwalk101 self wrencher Name: john Location: houston Join Date: Dec 2008 Motorcycle(s): 08 250r and 07 600r Posts: A lot.	you can prob use the stock rear brake light switch and hack up something to mount it but I figure it's much cleaner to install the pressure switch and it plugs right in...I think it's like only $12...

October 1st, 2010, 08:16 AM	#109
dubojr1 ninjette.org certified postwhore Name: Jason Location: Jacksonville, Florida Join Date: May 2010 Motorcycle(s): 09 Ninja 250R SE, 07 Honda CRF230F, 06 Honda CRF150F Posts: A lot.	Guys, guys. I believe Vince has already expressed to Ryan that this is not a tech thread. Please delete these post and move them to a tech thread or the farkles one Ryan already started. Others may be interested in this information but would never look in "market place" to find it. Thanks! http://www.ninjette.org/forums/showthread.php?t=56815 __________________________________________________ 09 250R SE: Paying it forward one post at a time! Don't forget to add yourself to our Member Map

October 2nd, 2010, 07:53 PM	#110
250rStar super ninja Name: TJ Location: Sacramento Join Date: Feb 2010 Motorcycle(s): 2009 kawasaki 250r Posts: 127	__________________________________________________ 2009 Ninja 250r aftermarket parts HotBodies double bubble Swing Arm Sliders Sylvania Sliverstar Ultra Akrapovic Slip-on Shinto Clip-Ons/Grips/Bar Ends

October 2nd, 2010, 10:06 PM	#111
Liquidtoon ninjette.org member Name: Josh Location: Sacramento, Ca Join Date: Jul 2010 Motorcycle(s): 09 Ninja 250r Posts: 215	That sure looks nice BUT ya know what would make it sexier? If it was RED!!!

October 3rd, 2010, 07:47 AM	#112
want1sobad Ninjette CPT Name: Vince Location: jacksonville, fl Join Date: May 2009 Motorcycle(s): Black 08 250r Posts: A lot.	josh, tony - thanks so much for getting these install pics posted! everything looks great any feedback for potential customers?

October 3rd, 2010, 12:30 PM	#113
250rStar super ninja Name: TJ Location: Sacramento Join Date: Feb 2010 Motorcycle(s): 2009 kawasaki 250r Posts: 127	good product pretty easy to install just wish the holes for the controls would be predrilled kinda sucked to do it myself but it was worth it!!!!!!! __________________________________________________ 2009 Ninja 250r aftermarket parts HotBodies double bubble Swing Arm Sliders Sylvania Sliverstar Ultra Akrapovic Slip-on Shinto Clip-Ons/Grips/Bar Ends

October 3rd, 2010, 05:58 PM	#114
want1sobad Ninjette CPT Name: Vince Location: jacksonville, fl Join Date: May 2009 Motorcycle(s): Black 08 250r Posts: A lot.	Last Call deadline for orders is this friday! lets get 'em in people

October 4th, 2010, 02:00 PM	#115
currentsea ninjette.org member Name: J.R. Location: Santa Barbara Join Date: Aug 2009 Motorcycle(s): 2008 Ninja 250R Posts: 118	payment sent, when are these orders shipping?

October 4th, 2010, 02:24 PM	#116
want1sobad Ninjette CPT Name: Vince Location: jacksonville, fl Join Date: May 2009 Motorcycle(s): Black 08 250r Posts: A lot.	hoping paul will have everything together by the 29th. i will make every effort to have individual orders delivered shortly thereafter - early november at the latest. updates will be forthcoming. Last futzed with by want1sobad; October 15th, 2010 at 01:30 PM.

October 4th, 2010, 03:04 PM	#117
drumm3r9 ninjette.org member Name: Kyle Location: Silver City Join Date: Jul 2009 Motorcycle(s): Kawasaki Ninja 250r Posts: 79	vince as far as chains what do you have? can you anodize the sprocket cover? i love the fork caps i got!!!!!!! i want to order the items mentioned before this fridays order deadline

October 4th, 2010, 03:06 PM	#118
drumm3r9 ninjette.org member Name: Kyle Location: Silver City Join Date: Jul 2009 Motorcycle(s): Kawasaki Ninja 250r Posts: 79	also want some levers....can you give me any deal on the cover, levers and chain??

October 4th, 2010, 03:31 PM	#119
want1sobad Ninjette CPT Name: Vince Location: jacksonville, fl Join Date: May 2009 Motorcycle(s): Black 08 250r Posts: A lot.	kyle, you have a pm

October 5th, 2010, 11:01 AM	#120
keeyu ninjette.org member Name: kenny Location: nyc Join Date: May 2010 Motorcycle(s): 250r Posts: 77	Too late for the angled risers?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New way to place Shinto USA orders	want1sobad	Motorcycle-related	2	December 17th, 2010 07:49 AM
Shinto USA Pricelist	want1sobad	Motorcycle-related	4	August 27th, 2010 12:01 PM
first shinto bulk order 7/30/10	want1sobad	Motorcycle-related	15	August 6th, 2010 10:09 AM
Shinto Racing USA	want1sobad	Motorcycle-related	31	July 9th, 2010 03:48 AM
SHINTO - Sprocket Cover - Pre-Order	ThaiNinjaRR	Motorcycle-related	7	May 19th, 2010 10:21 AM