possibly a cheap yet clean rear swingarm hugger - Group Buy - Page 2

Live2ride · July 23rd, 2011, 08:52 PM

btw I found out that it's $2.48 usd. relative link

wayanlam · July 23rd, 2011, 10:38 PM

oooo... does that mean you guys can get it through Yamaha directly in the states?

since there is someone asking me to buy it for them, but if its available there... it would be way cheaper!

it would be a bummer to send this over, and pay for international shipping when you can actually get it over there, lol

wayanlam · July 23rd, 2011, 10:43 PM

Oh, that other DIY looked way more complicated, they cut off half of the right side plastic. you loose the shape of the swing arm doing that... i prefer the way i did it by making the space for the brake calliper and keeping most of the hugger intact. keeps the left and right side of the swing arm in balance.

CZroe · July 23rd, 2011, 11:04 PM

Quote:

Originally Posted by wayanlam

oooo... does that mean you guys can get it through Yamaha directly in the states?

since there is someone asking me to buy it for them, but if its available there... it would be way cheaper!

it would be a bummer to send this over, and pay for international shipping when you can actually get it over there, lol

It's probably still worth asking at an official dealer, but that was targeted at people in India. If they are avaialable in Mexico like someone suggested, well, I live half an hour away but I don't have the necessary paperwork to cross the border. I'm sure I could find someone who could though.

Quote:

Originally Posted by wayanlam

Oh, that other DIY looked way more complicated, they cut off half of the right side plastic. you loose the shape of the swing arm doing that... i prefer the way i did it by making the space for the brake calliper and keeping most of the hugger intact. keeps the left and right side of the swing arm in balance.

I agree. It's not nearly as seamless as Sportisi's full cover but it is much better than the tiny rectangular shape that makes is so obvious that it's a 250 (all the bigger sportbikes here have those bulky flowing swingarms).

DarC · July 24th, 2011, 12:42 AM

If they have these in Mexico...I live about 10 miles from the bridge to Juarez. Even though my passport is good I think I will ask one of my Mexican buddies to hop over and check it out.

By saying hop over I mean legally :P

wayanlam · July 24th, 2011, 03:30 AM

yeah, NARC some hugers over the fence, hahahaha!

caps · July 24th, 2011, 04:51 AM

Quote:

Originally Posted by DarC

If they have these in Mexico...I live about 4 miles from the bridge to Juarez. Even though my passport is good I think I will ask one of my Mexican buddies to hop over and check it out.

By saying hop over I mean legally :P

You stand to make a fair amount of money if you can get them

DarC · July 24th, 2011, 05:48 AM

Quote:

Originally Posted by caps

You stand to make a fair amount of money if you can get them

$50 Huggers for sale.

Actually, IF I could get them I would try to get them to everyone here for cost. I've been helped greatly by the members of various forums in the past and only have the need to pay it forward.

On the other hand...I do need to replace the RC.

Let us work on actually getting them, lol.

caps · July 24th, 2011, 05:50 AM

Quote:

Originally Posted by DarC

Actually, IF I could get them I would try to get them to everyone here for cost. I've been helped greatly by the members of various forums in the past and only have the need to pay it forward.

That's how most of us see it

DarC · July 24th, 2011, 06:08 AM

I found a couple of dealers in Chihuahua, which is actually pretty close to where I am.

yamaha. Av. Teofilo Borunda Sur No. 2106 Col. Zona Centro C.P. 31000 Chihuahua, Chihuahua (01-614) 415-52-52, 415-52-59

yamaha. Antonio Montes No. 4705-A Col. Panamericana C.P. 31200 Chihuahua, Chihuahua (01-614) 413-80-48, 413-44-55, 413-97-00

I would love to give them a call but I speak this >< much Spanish. I may try to get some co-workers to try but I work nights so it could be a minute. If anyone here speaks Spanish please feel free to give them a call. Work out a drug deal (no pun intended) and get them shipped up here!

It may be tough finding someone on the US side to go down and get them considering that you have to drive through Juarez first. Huggers aren't worth someone's life, lol.

dragonboy · July 25th, 2011, 02:39 AM

Subscribing to thread.

dk58 · July 25th, 2011, 09:58 AM

That looks great.

wayanlam · July 28th, 2011, 02:28 AM

did anyone hop the fence to get some hugs, uh, hugers, from the mexicans?

DarC · July 28th, 2011, 07:15 AM

Not yet, can't find anyone brave enough. You know, the whole murderous drug cartel excuse. Whiners.

If I can get someone to call and speak some espanol then I think we might even be able to ship them up, a whopping 30 miles or so, to the U.S.

I attempted once to the top number I posted and got hung up on. Spanish fail, I even tried google translate but I was responded too and had no clue.

alex.s · July 28th, 2011, 08:26 AM

has anyone tried calling their local yamaha parts dealer to see if they can order them?

Kevin2109 · July 28th, 2011, 08:33 AM

My name is alex, and I have common sense lol

I'll call some today and see whats up

Bad news..... Called Yamaha directly (there corporation happens to be just down the road) and they had no idea what the byson was lol They said the only way to get the part is have it shipped in from wherever

DarC · July 28th, 2011, 08:51 AM

Quote:

Originally Posted by alex.s

has anyone tried calling their local yamaha parts dealer to see if they can order them?

I dropped by. The parts dept. gave me a massive deer in the headlights look. Might try again when I head in to swap rear tires if it's a different kid behind the counter. There's one in Las Cruces that I can give a shout to but for now I'm going to bed. Way past my bedtime.

EDIT: See post above, lol.

temps · July 28th, 2011, 09:35 AM

Quote:

Originally Posted by Kevin2109

My name is alex, and I have common sense lol

I'll call some today and see whats up

Bad news..... Called Yamaha directly (there corporation happens to be just down the road) and they had no idea what the byson was lol They said the only way to get the part is have it shipped in from wherever

the mexican yamaha website calls it the ybr250 try asking if they know what that is

http://www.yamaha-motor.com.mx/ybr250.html

CZroe · July 28th, 2011, 12:18 PM

Also, have the part number ready. Did anyone provide that to a US dealer when asking? They might not need to know what it is!

Kevin2109 · July 28th, 2011, 12:24 PM

Quote:

Originally Posted by CZroe

Also, have the part number ready. Did anyone provide that to a US dealer when asking? They might not need to know what it is!

I did, I was told it doesnt exist in the USA

Live2ride · July 28th, 2011, 04:01 PM

Quote:

Originally Posted by Kevin2109

I did, I was told it doesnt exist in the USA

That's why we're trying to prove them wrong.

CZroe · July 28th, 2011, 04:18 PM

Quote:

Originally Posted by Kevin2109

I did, I was told it doesnt exist in the USA

Thanks. Someone must be able to get them from Mexico. I'm happy to have my Sportisi hugger but I'd still love to see these.

Kevin2109 · July 28th, 2011, 04:32 PM

FOUND SOMEONE THAT SPEAKS ENGLISH IN MEXICO!!!!

Its $33usd!!!!!!!!!!!!!!!!

Who wants to go to mexico!!

This is the dealer

FACTORY RACING SA DE CV
Av. Reforma no. 701-B Col. Primera Seccion Mexicali Baja California

686-582-0000

lariosjl@factory-racing.com.mx

Snake · July 28th, 2011, 04:36 PM

Kevin, you are not far from the border. How far is it from where you live?

Kevin2109 · July 28th, 2011, 04:39 PM

its 117miles from my house. most of the drive is in california. The people that live in San Diego have a really quick drive!

Snake · July 28th, 2011, 04:40 PM

Sorry, I thought you were in S.D.

Kevin2109 · July 28th, 2011, 04:41 PM

Quote:

Originally Posted by Snake

Sorry, I thought you were in S.D.

Nope, orange county

So who wants to go to mexico?!?!?!

Snake · July 28th, 2011, 04:44 PM

CZroe lives in S.D. maybe he can go. Can ya Jet?

JBedney · July 28th, 2011, 05:01 PM

I just got this info from a friend in Guadalajara.

The hugger costs about usd35 and they have to order it at the main warehouse in Mexico City. Delivery time is 4 to 6 weeks. UPS shipping cost to the US would be another 15 or 20 dollars plus any applicable customs fees.

Final price depends on how many huggers are ordered.

caps · July 28th, 2011, 06:17 PM

I say we sent someone down to pick them up to avoid customs fees

wayanlam · July 28th, 2011, 06:43 PM

holy crapper... the price for exactly the same item over there in Mexico is being sold for 11 times more than what its getting sold here in Indonesia, or in India...

on top of it their order/delivery time (4~6 weeks) seems about as long as international shipping from here all the way there, BY SHIP! lolol....

its could almost be cheaper to buy a bunch of them here for way cheaper, and ship it in one package over to the states.

i would be willing to order these for like uh, 6 dollars each. i reckon if we get a small GB of 5 pieces of something, the overall cost of the item plus the shipping will be cheaper to get it here than buying it from mexico.

some simple maths~

from over here:
5 x $6 = $30
plus shipping, lets assume around $100~200

total = $130 ~ 230

--------------------------

from mexico:
5 x $35 = $175
plus shipping, around $75 ~ 100 (for 5 pcs)

total = $250 ~ 275
plus maybe some custom fees?

-------------------------------------------------

i already have one person in the States asking me to buy the huger for them, but i said that we should wait for you guys to check out the Mexican prices. but now its possibly cheaper to get it from here even though the shipping might seem pricey, just because the price of the item here is way cheaper.

the only thing i have no control over is the time they need to get the parts. i think i had to wait a week for the part to arrive here after i placed the order at the Yamaha dealer.

W.

Snake · July 28th, 2011, 06:45 PM

Quote:

Originally Posted by caps

I say we sent someone down to pick them up to avoid customs fees

Any volunteers near the border?

Kevin2109 · July 28th, 2011, 07:10 PM

Quote:

Originally Posted by Snake

Any volunteers near the border?

I was told it would only take 1 week to get

Also I think it all depends on how many people want one, if we get enough i think it will be cheaper to buy from Indonesia

jonnyc · July 28th, 2011, 07:31 PM

I am down to get one, sign me up.

Kevin2109 · July 28th, 2011, 07:38 PM

Put your name on the list!

1. Kevin2109
2. Jonnyc
3.
4.
5.
6.
7.

If someone wants to make a new group buy thread i think that would be appropriate

CZroe · July 28th, 2011, 08:00 PM

I almost wanna get on that list even though I have a Sportisi hugger!

Quote:

Originally Posted by Snake

Sorry, I thought you were in S.D.

You were thinking of Keven, who is in Chula Vista (even closer to the border).

Quote:

Originally Posted by Snake

CZroe lives in S.D. maybe he can go. Can ya Jet?

I don't have a passport and I'm going to be moving to WV or GA within that shipping time frame of 4-6 weeks.

There are a whole lot of us in SD though, thanks to the perfect weather year-round.

Quote:

Originally Posted by Kevin2109

I was told it would only take 1 week to get

Also I think it all depends on how many people want one, if we get enough i think it will be cheaper to buy from Indonesia

I don't know. For one thing, a lot of potential buyers are in SoCal/SD and would be paying pretty close to $35 for it (I'd tip the courier if I were you!). For another, I doubt they stack well so the package from Indonesia would be HUGE and they would still need to be broken up and shipped domestically at the same cost as the Mexican supplier. Also, people in southern AZ, NM, & TX may be able to pull the same thing off for their region and save a ton of money on shipping and import taxes.

JBedney · July 28th, 2011, 08:53 PM

Quote:

Originally Posted by Snake

Any volunteers near the border?

There is a Yamaha dealer next to the Mexican border located in Tijuana, so the volunteer must be someone from San Diego metro area.

FACTORY RACING, S.A. de C.V.
Blvd. Cuauhtémoc Sur-Oriente 2294-B
Col. Revolución
CP. 22400
Tijuana, Baja California

Phones:
011-52-664-686-3007
011-52-664-686-3000

e-mail:
lariosjl@factory-racing.com.mx

wayanlam · July 28th, 2011, 08:58 PM

add blade to the list;

http://www.ninjette.org/forums/member.php?u=4420

he wanted me to get him the huger from bali, but if you guys end up organizing it through Mexico, and it saves time and hopefully some $$, im sure he would be happy to join in with you guys.

ill pm him to check up and confirm for himself as well.

cheers

alex.s · July 28th, 2011, 08:59 PM

im in!! whereever it comes from!

Kevin2109 · July 28th, 2011, 09:06 PM

1. Kevin2109
2. Jonnyc
3. blade
4. alex.s
5.
6.
7.

July 23rd, 2011, 08:52 PM	#41
Live2ride ninjette.org certified postwhore Name: Cody Location: NoVa Join Date: Jan 2011 Motorcycle(s): 06 yzf r6r previously: 09 ninja 250r, black 07 zx6r Posts: A lot.	btw I found out that it's $2.48 usd. relative link __________________________________________________

July 23rd, 2011, 10:38 PM	#42
wayanlam ninjette.org certified postwhore Name: Wayan Location: Bali - Indonesia Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.	oooo... does that mean you guys can get it through Yamaha directly in the states? since there is someone asking me to buy it for them, but if its available there... it would be way cheaper! it would be a bummer to send this over, and pay for international shipping when you can actually get it over there, lol __________________________________________________ Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield

July 23rd, 2011, 10:43 PM	#43
wayanlam ninjette.org certified postwhore Name: Wayan Location: Bali - Indonesia Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.	Oh, that other DIY looked way more complicated, they cut off half of the right side plastic. you loose the shape of the swing arm doing that... i prefer the way i did it by making the space for the brake calliper and keeping most of the hugger intact. keeps the left and right side of the swing arm in balance. __________________________________________________ Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield

July 24th, 2011, 12:42 AM	#45
DarC DUCEATR Name: Dan Location: El Paso, Texas Join Date: Apr 2011 Motorcycle(s): RVT1000R Posts: 628	If they have these in Mexico...I live about 10 miles from the bridge to Juarez. Even though my passport is good I think I will ask one of my Mexican buddies to hop over and check it out. By saying hop over I mean legally :P __________________________________________________ 2001 SP1 RC51- #62 -Akrapovic Ti, PCIII, Colin Edward's first baby tooth, Honda Racing sticker, some Japanese doods best attempt at Engrish scribbled on my engine block, little touch of soul. Last futzed with by DarC; August 1st, 2011 at 10:55 PM.

July 24th, 2011, 03:30 AM	#46
wayanlam ninjette.org certified postwhore Name: Wayan Location: Bali - Indonesia Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.	yeah, NARC some hugers over the fence, hahahaha! __________________________________________________ Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield

July 24th, 2011, 06:08 AM	#50
DarC DUCEATR Name: Dan Location: El Paso, Texas Join Date: Apr 2011 Motorcycle(s): RVT1000R Posts: 628	I found a couple of dealers in Chihuahua, which is actually pretty close to where I am. yamaha. Av. Teofilo Borunda Sur No. 2106 Col. Zona Centro C.P. 31000 Chihuahua, Chihuahua (01-614) 415-52-52, 415-52-59 yamaha. Antonio Montes No. 4705-A Col. Panamericana C.P. 31200 Chihuahua, Chihuahua (01-614) 413-80-48, 413-44-55, 413-97-00 I would love to give them a call but I speak this >< much Spanish. I may try to get some co-workers to try but I work nights so it could be a minute. If anyone here speaks Spanish please feel free to give them a call. Work out a drug deal (no pun intended) and get them shipped up here! It may be tough finding someone on the US side to go down and get them considering that you have to drive through Juarez first. Huggers aren't worth someone's life, lol. __________________________________________________ 2001 SP1 RC51- #62 -Akrapovic Ti, PCIII, Colin Edward's first baby tooth, Honda Racing sticker, some Japanese doods best attempt at Engrish scribbled on my engine block, little touch of soul.

July 25th, 2011, 02:39 AM	#51
dragonboy ninjette.org member Name: JT Location: NorCal Join Date: May 2011 Motorcycle(s): 2010 250R SE Green Machine, 2011 250R SE White Lightning Posts: 155	Subscribing to thread.

July 25th, 2011, 09:58 AM	#52
dk58 ninjette.org member Name: Dan Location: Pittsburgh, PA Join Date: Sep 2010 Motorcycle(s): 10 Ninja 250R Posts: 160	That looks great.

July 28th, 2011, 02:28 AM	#53
wayanlam ninjette.org certified postwhore Name: Wayan Location: Bali - Indonesia Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.	did anyone hop the fence to get some hugs, uh, hugers, from the mexicans? __________________________________________________ Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield

July 28th, 2011, 07:15 AM	#54
DarC DUCEATR Name: Dan Location: El Paso, Texas Join Date: Apr 2011 Motorcycle(s): RVT1000R Posts: 628	Not yet, can't find anyone brave enough. You know, the whole murderous drug cartel excuse. Whiners. If I can get someone to call and speak some espanol then I think we might even be able to ship them up, a whopping 30 miles or so, to the U.S. I attempted once to the top number I posted and got hung up on. Spanish fail, I even tried google translate but I was responded too and had no clue. __________________________________________________ 2001 SP1 RC51- #62 -Akrapovic Ti, PCIII, Colin Edward's first baby tooth, Honda Racing sticker, some Japanese doods best attempt at Engrish scribbled on my engine block, little touch of soul.

July 28th, 2011, 08:26 AM	#55
alex.s wat Name: wat Location: tustin/long beach Join Date: Sep 2009 Motorcycle(s): wat Posts: Too much. Blog Entries: 5 MOTM - Oct '12, Feb '14	has anyone tried calling their local yamaha parts dealer to see if they can order them? __________________________________________________

July 28th, 2011, 08:33 AM	#56
Kevin2109 KThanksBye Name: Kevin Location: Orange County Join Date: Mar 2011 Motorcycle(s): 2006 zx636r Posts: A lot.	My name is alex, and I have common sense lol I'll call some today and see whats up Bad news..... Called Yamaha directly (there corporation happens to be just down the road) and they had no idea what the byson was lol They said the only way to get the part is have it shipped in from wherever __________________________________________________ ----> My Youtube! <---- Unregistered, watch my youtube page!

July 28th, 2011, 12:18 PM	#59
CZroe CPT Falcon Name: J.Emmett Turner Location: Newnan, GA Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.	Also, have the part number ready. Did anyone provide that to a US dealer when asking? They might not need to know what it is!

July 28th, 2011, 04:32 PM	#63
Kevin2109 KThanksBye Name: Kevin Location: Orange County Join Date: Mar 2011 Motorcycle(s): 2006 zx636r Posts: A lot.	FOUND SOMEONE THAT SPEAKS ENGLISH IN MEXICO!!!! Its $33usd!!!!!!!!!!!!!!!! Who wants to go to mexico!! This is the dealer FACTORY RACING SA DE CV Av. Reforma no. 701-B Col. Primera Seccion Mexicali Baja California 686-582-0000 lariosjl@factory-racing.com.mx __________________________________________________ ----> My Youtube! <---- Unregistered, watch my youtube page!

July 28th, 2011, 04:36 PM	#64
Snake ninjette.org certified postwhore Name: Rick Location: Alexandria, Louisiana Join Date: Jan 2009 Motorcycle(s): 05 Blue Ninja 250 Posts: Too much. MOTY - 2017, MOTM - Jan '19, Oct '16, May '14	Kevin, you are not far from the border. How far is it from where you live?

July 28th, 2011, 04:39 PM	#65
Kevin2109 KThanksBye Name: Kevin Location: Orange County Join Date: Mar 2011 Motorcycle(s): 2006 zx636r Posts: A lot.	its 117miles from my house. most of the drive is in california. The people that live in San Diego have a really quick drive! __________________________________________________ ----> My Youtube! <---- Unregistered, watch my youtube page!

July 28th, 2011, 04:40 PM	#66
Snake ninjette.org certified postwhore Name: Rick Location: Alexandria, Louisiana Join Date: Jan 2009 Motorcycle(s): 05 Blue Ninja 250 Posts: Too much. MOTY - 2017, MOTM - Jan '19, Oct '16, May '14	Sorry, I thought you were in S.D.

July 28th, 2011, 04:44 PM	#68
Snake ninjette.org certified postwhore Name: Rick Location: Alexandria, Louisiana Join Date: Jan 2009 Motorcycle(s): 05 Blue Ninja 250 Posts: Too much. MOTY - 2017, MOTM - Jan '19, Oct '16, May '14	CZroe lives in S.D. maybe he can go. Can ya Jet?

July 28th, 2011, 05:01 PM	#69
JBedney ninjette.org member Name: John Location: California Join Date: Aug 2010 Motorcycle(s): Ninja 250R Posts: 34	I just got this info from a friend in Guadalajara. The hugger costs about usd35 and they have to order it at the main warehouse in Mexico City. Delivery time is 4 to 6 weeks. UPS shipping cost to the US would be another 15 or 20 dollars plus any applicable customs fees. Final price depends on how many huggers are ordered.

July 28th, 2011, 06:17 PM	#70
caps Sexy Beast Name: Mat Location: Tampa Join Date: Mar 2011 Motorcycle(s): 2010 Ninja 250R, 2006 ZX-14, 2012 Ducati Monster Posts: A lot.	I say we sent someone down to pick them up to avoid customs fees __________________________________________________ 2010 Ninja 250 2006 Ninja ZX-14 ^Both Links

July 28th, 2011, 06:43 PM	#71
wayanlam ninjette.org certified postwhore Name: Wayan Location: Bali - Indonesia Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.	holy crapper... the price for exactly the same item over there in Mexico is being sold for 11 times more than what its getting sold here in Indonesia, or in India... on top of it their order/delivery time (4~6 weeks) seems about as long as international shipping from here all the way there, BY SHIP! lolol.... its could almost be cheaper to buy a bunch of them here for way cheaper, and ship it in one package over to the states. i would be willing to order these for like uh, 6 dollars each. i reckon if we get a small GB of 5 pieces of something, the overall cost of the item plus the shipping will be cheaper to get it here than buying it from mexico. some simple maths~ from over here: 5 x $6 = $30 plus shipping, lets assume around $100~200 total = $130 ~ 230 -------------------------- from mexico: 5 x $35 = $175 plus shipping, around $75 ~ 100 (for 5 pcs) total = $250 ~ 275 plus maybe some custom fees? ------------------------------------------------- i already have one person in the States asking me to buy the huger for them, but i said that we should wait for you guys to check out the Mexican prices. but now its possibly cheaper to get it from here even though the shipping might seem pricey, just because the price of the item here is way cheaper. the only thing i have no control over is the time they need to get the parts. i think i had to wait a week for the part to arrive here after i placed the order at the Yamaha dealer. W. __________________________________________________ Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield

July 28th, 2011, 07:31 PM	#74
jonnyc ninjette.org member Name: Jon Location: NYC Join Date: Jul 2011 Motorcycle(s): 250 Posts: 129	I am down to get one, sign me up.

July 28th, 2011, 07:38 PM	#75
Kevin2109 KThanksBye Name: Kevin Location: Orange County Join Date: Mar 2011 Motorcycle(s): 2006 zx636r Posts: A lot.	Put your name on the list! 1. Kevin2109 2. Jonnyc 3. 4. 5. 6. 7. If someone wants to make a new group buy thread i think that would be appropriate __________________________________________________ ----> My Youtube! <---- Unregistered, watch my youtube page!

July 28th, 2011, 08:58 PM	#78
wayanlam ninjette.org certified postwhore Name: Wayan Location: Bali - Indonesia Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.	add blade to the list; http://www.ninjette.org/forums/member.php?u=4420 he wanted me to get him the huger from bali, but if you guys end up organizing it through Mexico, and it saves time and hopefully some $$, im sure he would be happy to join in with you guys. ill pm him to check up and confirm for himself as well. cheers __________________________________________________ Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield

July 28th, 2011, 08:59 PM	#79
alex.s wat Name: wat Location: tustin/long beach Join Date: Sep 2009 Motorcycle(s): wat Posts: Too much. Blog Entries: 5 MOTM - Oct '12, Feb '14	im in!! whereever it comes from! __________________________________________________

July 28th, 2011, 09:06 PM	#80
Kevin2109 KThanksBye Name: Kevin Location: Orange County Join Date: Mar 2011 Motorcycle(s): 2006 zx636r Posts: A lot.	1. Kevin2109 2. Jonnyc 3. blade 4. alex.s 5. 6. 7. __________________________________________________ ----> My Youtube! <---- Unregistered, watch my youtube page!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cheap swingarm spools!	salcuta88	2008 - 2012 Ninja 250R Farkles	3	July 20th, 2014 05:07 PM
New A&L Rear Set Adjuster Group Buy	DailyRidden250R	Motorcycle-related	137	April 16th, 2012 03:38 AM
08+ : RPM Rear Shock Group Buy	abhijitz	Motorcycle-related	13	April 10th, 2012 04:09 PM
Group Buy on Pazzon leversCHEAPAny Bike*	gadgetguy1288	Motorcycle-related	6	December 8th, 2011 07:56 AM
X RACE Rear set Group Buy	ztrack157	Motorcycle-related	74	October 8th, 2011 08:18 PM