ModMy250.com introductory sale on integrated tail light! - Page 3

5evenz · February 1st, 2012, 08:49 PM

Payment sent. (WOOPIEEEE!!!!!!)

massacremasses · February 1st, 2012, 08:59 PM

woohoo that everyone?

CThunder-blue · February 1st, 2012, 09:33 PM

Thanks guys! Only missing Toby's payment

jack_bm · February 2nd, 2012, 01:35 AM

was just wondering what kind of switch the blaster X switch is, is it something you could just buy down the hardware shop?

CThunder-blue · February 2nd, 2012, 08:21 AM

Yeah, it looks like its just a circuit on/off toggle switch. If you price it out, the cost is nearly the same once you factor in the time to make one.

Makenza · February 2nd, 2012, 09:01 AM

Quote:

Originally Posted by CThunder-blue

Yeah, it looks like its just a circuit on/off toggle switch. If you price it out, the cost is nearly the same once you factor in the time to make one.

^ Which is why I'm just ordering one through Tri for the CustomLED switch, it'll be properly gauged wiring, properly made, with a ring terminal and proper shrink tape. Otherwise I'd make it myself.

EthioKnight · February 2nd, 2012, 12:13 PM

Hey Tri,
Do you think it would be possible for me to buy the switch after I've received and installed the tail light? I think the standard 3 strobe is enough, but if I wanted to increase it, would you accept new orders? (for just the switch I mean). thanks.

Makenza · February 2nd, 2012, 12:16 PM

You don't need the switch, the switch just makes it easier to configure.
The tail light comes with a ground, that you would hook up to the switch.
But to re-configure the tail light without the switch, you would just MANUALLY ground that wire. As in hold it by hand, and touch it to a ground.

Again, the switch is 100% for convenience. Absolutely not necessary.

jack_bm · February 2nd, 2012, 12:58 PM

hmm if its any switch i might buy one at a later stage or something as i don't wanna confuse my self any more with the installation lol with the switch is it just for configuration because i saw on a youtube video think from someone on this site that when its turned on it makes it strobe and everything and when he turns it off it goes normal, what's all that for?

Makenza · February 2nd, 2012, 01:04 PM

All of that is also done using the ground wire, aka the ground switch.
Both ways enable the strobe mode, which is basically a demo mode.

See this link for further information.
http://www.customled.com/09_250R_REV...structions.pdf

jack_bm · February 2nd, 2012, 01:23 PM

Quote:

Originally Posted by Makenza

All of that is also done using the ground wire, aka the ground switch.
Both ways enable the strobe mode, which is basically a demo mode.

See this link for further information.
http://www.customled.com/09_250R_REV...structions.pdf

had a look and it says "THIS FEATURE IS ENGAGED BY GROUNDING THE GRAY WIRE (TO ANY COMMON GROUND POINT: BATTERY (-) OR FRAME). THIS WIRE SHOULD BE CONNECTED TO A TOGGLE SWITCH TO CONTROL STROBE MODE OPERATION. FOR NORMAL TAIL LIGHT OPERATION, THIS WIRE SHOULD NOT BE CONNECTED TO ANYTHING." Does this mean i have to have the switch (turned on) and grounded for the strobe to work when im braking otherwise if its not grounded it wont strobe? :s sorry im easily confused lol

Bo0stZomb13 · February 2nd, 2012, 01:25 PM

Ill take a tail light and relay. (I have your diode kit already lol)

Makenza · February 2nd, 2012, 01:28 PM

No, read it more carefully,

Quote:

CUSTOMIZING FEATURES
ONCE YOU HAVE ACCESSED THE PROGRAMMING INTERFACE, YOU CAN CUSTOMIZE THE FOLLOWING MENUS.
1) TURN THE STARTUP SEQUENCE ON/OFF.
2) SET THE NUMBER OF BRAKE ALERT PULSES FROM 0 TO 19, OR CONSTANT WHILE BRAKES APPLIED.
3) SET THE RUNNING LIGHT BRIGHTNESS WITHIN A PRESET RANGE.
4) SET THE BRAKE LIGHT BRIGHTNESS WITHIN A PRESET RANGE.
5) ENTER DEMO MODE. (USEFUL FOR BIKE SHOWS AND DISPLAYS)
6) RESET FACTORY DEFAULTS (SAME AS WHEN THE TAIL LIGHT WAS MANUFACTURED).

You ground, and unground, 5 times, and you enter demo mode.

jack_bm · February 2nd, 2012, 01:31 PM

Quote:

Originally Posted by Makenza

No, read it more carefully,

You ground, and unground, 5 times, and you enter demo mode.

Ohhh thats cool thanks for helping me understand that, im sure i'll have more question when it comes to wiring it up and programming things like the brightness and all that, we'll come to that when i get there thoguh haha

Tri: if its not to much hassle can i add a switch think it will just make it a bit nicer for programming if its too much hassle no worries i can live without it, i can also pay as soon as you confirm it.

n250r · February 2nd, 2012, 01:58 PM

Payment sent.

CThunder-blue · February 2nd, 2012, 10:15 PM

Quote:

Originally Posted by Bo0stZomb13

Ill take a tail light and relay. (I have your diode kit already lol)

PM sent

Quote:

Originally Posted by jack_bm

Tri: if its not to much hassle can i add a switch think it will just make it a bit nicer for programming if its too much hassle no worries i can live without it, i can also pay as soon as you confirm it.

No problem Jack. I sent you another invoice for the switch.

jack_bm · February 3rd, 2012, 12:57 AM

Quote:

Originally Posted by CThunder-blue

No problem Jack. I sent you another invoice for the switch.

All paid thanks for lettin me do that

Ninja250gurl · February 3rd, 2012, 08:05 AM

Am i to late to get in on this?? I need the front and back i think its $166. that will cover me for everything i need...right?

massacremasses · February 3rd, 2012, 08:10 AM

Quote:

Originally Posted by Ninja250gurl

Am i to late to get in on this?? I need the front and back i think its $166. that will cover me for everything i need...right?

Quote:

Originally Posted by CThunder-blue

Ok, here's the sale pricing:

Full kit:
Front LED's- $47
Relay- $13
Diode kit- Free
Int. Tail light- $106

Total cost: $166 Shipped (+$15 for a set of Y adapters) Normal cost if you were to buy at a later time: $195

Semi kit:
Front LED's- $47
Diode or relay or Y adapter: Free
Int Tail light- $106

Total cost: $153 Shipped

Kit sale:
Int. Tail Light- $106
Relay- Free
or
Diode kit- Free
or
Y adapter x2- Free

Total Cost:$106 Shipped

Yeah thats right unless you want to run your stock rear turn signals as well. Then I think you need the y adapter. Someone correct me if im wrong.

SEND HIM YOUR EMAIL (paypal email) so he can send you an invoice. Then check you paypal then pay.

Ninja250gurl · February 3rd, 2012, 08:13 AM

Quote:

Originally Posted by massacremasses

Yeah thats right unless you want to run your stock rear turn signals as well. Then I think you need the y adapter. Someone correct me if im wrong.

SEND HIM YOUR EMAIL (paypal email) so he can send you an invoice. Then check you paypal then pay.

Yeah, i dont want to run my stock rear turn signals.. Ok, ill send him my paypal email

Thanx!

CThunder-blue · February 3rd, 2012, 12:34 PM

This sale ends next wednesday. If anyone else wants in, please let me know.

Bo0stZomb13 · February 3rd, 2012, 09:30 PM

Quote:

Originally Posted by CThunder-blue

PM sent

replied

CThunder-blue · February 4th, 2012, 12:28 AM

Btw, everyone placing an order by the 8th will be getting a free gift. I won't say what until the sale is over

5evenz · February 4th, 2012, 01:03 AM

oooooo000ooo tantalizing!!!

Kstorm21 · February 4th, 2012, 01:06 AM

Quote:

Originally Posted by CThunder-blue

Btw, everyone placing an order by the 8th will be getting a free gift. I won't say what until the sale is over

WHAAAAAAAAAAAAAAAAAAAT!!!!!! Can't wait!

jack_bm · February 4th, 2012, 02:03 AM

I cannot wait to get my tail light and find out what the gift is

massacremasses · February 4th, 2012, 09:11 AM

This is like Adamandeve.com!!! you get a free gift there too! ahahahaha

Makenza · February 4th, 2012, 02:41 PM

Nice! Free stuff? I'll take it!!

Squalo · February 5th, 2012, 01:20 AM

Ok, I'm in. PM sent

dma · February 5th, 2012, 04:10 PM

Sent a PM-- interested. Let me know, thanks.

CThunder-blue · February 5th, 2012, 08:27 PM

Thanks guys, I've updated the list.

Kstorm21 · February 6th, 2012, 03:45 AM

When will you be shipping stuff out?

CThunder-blue · February 6th, 2012, 08:32 AM

I'll be placing the order for the tail lights on the 9th. Once they come in along with other parts, I'll start shipping. Everyone who has a US shipping address will get a PayPal notification of the tracking info.

Thanks

Tri

Bo0stZomb13 · February 7th, 2012, 06:00 PM

Quote:

Originally Posted by CThunder-blue

I'll be placing the order for the tail lights on the 9th. Once they come in along with other parts, I'll start shipping. Everyone who has a US shipping address will get a PayPal notification of the tracking info.

Thanks

Tri

CThunder-blue · February 8th, 2012, 08:55 AM

Last day to get in on the GB people. The prices will never be this low again!

jack_bm · February 9th, 2012, 02:42 PM

do you know when it will be sent out to GB?
Posted via Mobile Device

taz_250R · February 9th, 2012, 03:13 PM

First GB = Group Buy
Second GB = Great Britain

taz_250R · February 9th, 2012, 03:15 PM

Quote:

Originally Posted by CThunder-blue

Last day to get in on the GB people. The prices will never be this low again!

Hey Tri, you got my payment right? Once again thanks for the group buy offer...

jack_bm · February 10th, 2012, 02:51 AM

Quote:

Originally Posted by taz_250R

First GB = Group Buy
Second GB = Great Britain

OHHHH -.- GB group buy

totally new that....

oreX · February 10th, 2012, 09:55 AM

Any updates on this?

February 1st, 2012, 08:59 PM	#82
massacremasses Avid Kitteh Poster Name: Justin Location: Norcal Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.	woohoo that everyone? __________________________________________________ I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/

February 1st, 2012, 09:33 PM	#83
CThunder-blue ModMy250.com Name: Tri Location: St, Louis Join Date: Sep 2010 Motorcycle(s): 2009 Ninja 250R, 2005 R6 Posts: A lot.	Thanks guys! Only missing Toby's payment __________________________________________________ The www.ModMy250.com guy

February 2nd, 2012, 08:21 AM	#85
CThunder-blue ModMy250.com Name: Tri Location: St, Louis Join Date: Sep 2010 Motorcycle(s): 2009 Ninja 250R, 2005 R6 Posts: A lot.	Yeah, it looks like its just a circuit on/off toggle switch. If you price it out, the cost is nearly the same once you factor in the time to make one. __________________________________________________ The www.ModMy250.com guy

February 2nd, 2012, 01:25 PM	#92
Bo0stZomb13 ninjette.org member Name: Andrew Location: Pensacola / Jacksonville, FL Join Date: Mar 2011 Motorcycle(s): 09 ninja 250r Posts: 97	Ill take a tail light and relay. (I have your diode kit already lol) __________________________________________________ Area P full race, Hot bodies Undertail, Adjustable levers, Dyno Jet stage 2 kit, 719 gelgrips, Sporsti hugger, 15T, KN filter, Shogun swingarm spools

February 3rd, 2012, 08:05 AM	#98
Ninja250gurl M@ry M@ry Name: Mary Location: Houston Join Date: Jan 2012 Motorcycle(s): 2012 ninja 250 Red/Black Posts: 141	Am i to late to get in on this?? I need the front and back i think its $166. that will cover me for everything i need...right? __________________________________________________ ~M@ry Beside me or behind me... real woman dont ride bt<h!*

February 1st, 2012, 08:49 PM	#81
5evenz ninjette.org member Name: Sev Location: Vancouver Join Date: Jul 2011 Motorcycle(s): 09' 250r Thunder Blue Posts: 165	Payment sent. (WOOPIEEEE!!!!!!)

February 2nd, 2012, 01:35 AM	#84
jack_bm Ex ninjette! Name: Jack Location: East sussex England Join Date: Nov 2011 Motorcycle(s): Suzuki GSXR 600 K4, Kawasaki ninja 250r 08 Posts: 294	was just wondering what kind of switch the blaster X switch is, is it something you could just buy down the hardware shop?

February 2nd, 2012, 12:13 PM	#87
EthioKnight Super Noob Name: Alex Location: Mobile, AL Join Date: Oct 2011 Motorcycle(s): '09 Kawasaki Ninja 250R, '84 Honda Spree 50cc Posts: A lot.	Hey Tri, Do you think it would be possible for me to buy the switch after I've received and installed the tail light? I think the standard 3 strobe is enough, but if I wanted to increase it, would you accept new orders? (for just the switch I mean). thanks.

February 2nd, 2012, 12:16 PM	#88
Makenza Lurker Name: John Location: Running around Join Date: Jun 2010 Motorcycle(s): 2010 Red Ninja 250R Posts: 102	You don't need the switch, the switch just makes it easier to configure. The tail light comes with a ground, that you would hook up to the switch. But to re-configure the tail light without the switch, you would just MANUALLY ground that wire. As in hold it by hand, and touch it to a ground. Again, the switch is 100% for convenience. Absolutely not necessary.

February 2nd, 2012, 12:58 PM	#89
jack_bm Ex ninjette! Name: Jack Location: East sussex England Join Date: Nov 2011 Motorcycle(s): Suzuki GSXR 600 K4, Kawasaki ninja 250r 08 Posts: 294	hmm if its any switch i might buy one at a later stage or something as i don't wanna confuse my self any more with the installation lol with the switch is it just for configuration because i saw on a youtube video think from someone on this site that when its turned on it makes it strobe and everything and when he turns it off it goes normal, what's all that for?

February 2nd, 2012, 01:04 PM	#90
Makenza Lurker Name: John Location: Running around Join Date: Jun 2010 Motorcycle(s): 2010 Red Ninja 250R Posts: 102	All of that is also done using the ground wire, aka the ground switch. Both ways enable the strobe mode, which is basically a demo mode. See this link for further information. http://www.customled.com/09_250R_REV...structions.pdf

February 2nd, 2012, 01:58 PM	#95
n250r ninjette.org member Name: Toby Location: Los Angeles Join Date: Sep 2011 Motorcycle(s): 2009 Blue Ninja 250r Posts: 37	Payment sent.

February 3rd, 2012, 12:34 PM	#101
CThunder-blue ModMy250.com Name: Tri Location: St, Louis Join Date: Sep 2010 Motorcycle(s): 2009 Ninja 250R, 2005 R6 Posts: A lot.	This sale ends next wednesday. If anyone else wants in, please let me know. __________________________________________________ The www.ModMy250.com guy

February 4th, 2012, 12:28 AM	#103
CThunder-blue ModMy250.com Name: Tri Location: St, Louis Join Date: Sep 2010 Motorcycle(s): 2009 Ninja 250R, 2005 R6 Posts: A lot.	Btw, everyone placing an order by the 8th will be getting a free gift. I won't say what until the sale is over __________________________________________________ The www.ModMy250.com guy

February 4th, 2012, 01:03 AM	#104
5evenz ninjette.org member Name: Sev Location: Vancouver Join Date: Jul 2011 Motorcycle(s): 09' 250r Thunder Blue Posts: 165	oooooo000ooo tantalizing!!!

February 4th, 2012, 02:03 AM	#106
jack_bm Ex ninjette! Name: Jack Location: East sussex England Join Date: Nov 2011 Motorcycle(s): Suzuki GSXR 600 K4, Kawasaki ninja 250r 08 Posts: 294	I cannot wait to get my tail light and find out what the gift is

February 4th, 2012, 09:11 AM	#107
massacremasses Avid Kitteh Poster Name: Justin Location: Norcal Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.	This is like Adamandeve.com!!! you get a free gift there too! ahahahaha __________________________________________________ I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/

February 4th, 2012, 02:41 PM	#108
Makenza Lurker Name: John Location: Running around Join Date: Jun 2010 Motorcycle(s): 2010 Red Ninja 250R Posts: 102	Nice! Free stuff? I'll take it!!

February 5th, 2012, 01:20 AM	#109
Squalo ninjette.org member Name: Canada Location: Alberta Join Date: May 2011 Motorcycle(s): 09 Ninja 250 Posts: 55	Ok, I'm in. PM sent

February 5th, 2012, 04:10 PM	#110
dma ninjette.org member Name: Derek Location: Chicago Suburbs Join Date: May 2011 Motorcycle(s): 09 Ninja 250 Posts: 18	Sent a PM-- interested. Let me know, thanks.

February 5th, 2012, 08:27 PM	#111
CThunder-blue ModMy250.com Name: Tri Location: St, Louis Join Date: Sep 2010 Motorcycle(s): 2009 Ninja 250R, 2005 R6 Posts: A lot.	Thanks guys, I've updated the list. __________________________________________________ The www.ModMy250.com guy

February 6th, 2012, 03:45 AM	#112
Kstorm21 ninjette.org sage Name: Katherine Location: Schofield Barracks, HI Join Date: Dec 2011 Motorcycle(s): 2009 Ninja 250R SE Posts: 767	When will you be shipping stuff out?

February 6th, 2012, 08:32 AM	#113
CThunder-blue ModMy250.com Name: Tri Location: St, Louis Join Date: Sep 2010 Motorcycle(s): 2009 Ninja 250R, 2005 R6 Posts: A lot.	I'll be placing the order for the tail lights on the 9th. Once they come in along with other parts, I'll start shipping. Everyone who has a US shipping address will get a PayPal notification of the tracking info. Thanks Tri __________________________________________________ The www.ModMy250.com guy

February 8th, 2012, 08:55 AM	#115
CThunder-blue ModMy250.com Name: Tri Location: St, Louis Join Date: Sep 2010 Motorcycle(s): 2009 Ninja 250R, 2005 R6 Posts: A lot.	Last day to get in on the GB people. The prices will never be this low again! __________________________________________________ The www.ModMy250.com guy

February 9th, 2012, 02:42 PM	#116
jack_bm Ex ninjette! Name: Jack Location: East sussex England Join Date: Nov 2011 Motorcycle(s): Suzuki GSXR 600 K4, Kawasaki ninja 250r 08 Posts: 294	do you know when it will be sent out to GB? Posted via Mobile Device

February 9th, 2012, 03:13 PM	#117
taz_250R Tinkerer Name: K Location: Chandler, AZ Join Date: Jan 2012 Motorcycle(s): 2011 Ninja 250R Posts: 16	First GB = Group Buy Second GB = Great Britain

February 10th, 2012, 09:55 AM	#120
oreX ninjette.org member Name: Zach Location: Orlando, fl Join Date: Dec 2011 Motorcycle(s): 2013 636 - ABS Posts: 173 Blog Entries: 1	Any updates on this?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Modmy250.com promo sale!	CThunder-blue	Motorcycle-related	0	December 9th, 2012 05:45 PM
CustomLED Integrated tail light special sale!	CThunder-blue	Motorcycle-related	8	October 30th, 2012 01:29 PM
New Brake Light Modulators for sale~! Limited introductory sale!!	CThunder-blue	Motorcycle-related	15	October 5th, 2012 08:09 PM
Wire integrated tail light such that the brake light stays off while signal flashes?	CZroe	2008 - 2012 Ninja 250R Tech Talk	6	March 4th, 2012 06:36 PM