November 6th, 2021, 04:39 PM | #1 |
MC Pee Pants
Name: Bodhi
Location: Try to find me.
Join Date: Mar 2019 Motorcycle(s): '04 EX250F custom, 2008 Ninja 650R Posts: 21
|
Airbox Connection
All right. So, I've recently put my airbox back into my little Ninjette, after a while of having an air-filter mod installed. My only issue is trying to connect the hoses to the back of the carbs.
What's the easiest way to get them to wrap around the mouth of the carbs? The hoses are also pretty stiff. Is there anything I could use to soften them a bit? Would something like WD-40 work? I already have the battery box mod and it's still a pain. I appreciate any and all help I can get! Thanks. ฅ(^・ω・^ฅ) |
|
November 7th, 2021, 07:38 AM | #2 |
MC Pee Pants
Name: Bodhi
Location: Try to find me.
Join Date: Mar 2019 Motorcycle(s): '04 EX250F custom, 2008 Ninja 650R Posts: 21
|
Managed to get it to fit. Sprayed the connectors with WD-40, let it sit overnight, then I took my portable heater and sat it over the hoses for about 10 minutes this morning. They slid right on!
|
3 out of 3 members found this post helpful. |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Connection cover concern | o5mooch5o | 2008 - 2012 Ninja 250R Tech Talk | 3 | September 1st, 2017 10:45 PM |
Ground connection? | juliusmichaelhonrada | 1986 - 2007 Ninja 250R Tech Talk | 3 | August 5th, 2016 06:12 AM |
Airbox to Carb Connection | Ralgha | 2008 - 2012 Ninja 250R Tech Talk | 5 | September 15th, 2014 06:38 PM |
Can you tell me what this wire connection is for.. | svsandeep | 2008 - 2012 Ninja 250R Tech Talk | 2 | May 19th, 2012 10:43 AM |
|
|