carburetor bolts

[james250ninja]

anyone know the size of the carburator bolts. they are the ones that bolt down the black covers that the needles are under

[LoD575]

Run a search, that is where I found the specs for them. Can't recall the length and thread pitch but they are 4mm.

[Gorilla25]

M4-.7 ....or 4mm ..pitch:.7t

[Momaru]

Originally Posted by Momaru

I mangaged to find some at my local hardware store, under 'metric pan head screws.' You could order some online (below) but you'd be overpaying a bunch + waiting on them to arrive.

Size (obviously) depends on which screw it is you mangled. I'll assume it's on the top of the carbs holding the black cap that covers the needle/diaphragm since you're working on the needles, so those are 4mm x 18mm screw. I recommend getting a few of that size as well as a few 4x14 screws, which fit the float bowls for changing main jets if/when you plan to. We use a 0.7 thread pitch on both kinds of screws; the 0.7's I got fit just fine, but I've got an '08

If this isn't it, check the spec sheets @ http://www.kawasakipartsnation.com, Ronayers or the Kawasaki home site, 'under carburetor' or 'carburetor parts'

Thread

Search = your friend