January 30th, 2014, 06:23 AM | #1 |
ninjette.org guru
Name: Andrew
Location: St Louis
Join Date: Sep 2013 Motorcycle(s): Ducati 1198s, Triumph D675, Suzuki SV1000s, `08 Ninja 250, `11 Ninja 250, Suzuki GS750 Posts: 368
|
Ninja 250 08-12 Rear Captive Spacers
$40 shipped for 1 set of the rear captive spacers.
Will have more available to ship out Monday morning (2/3). Paypal is preferred payment method. (Andrew.collins556@gmail.com) Can also pick up locally. See the thread below for more information, front spacers are in the works along with an axle assist pin, like seen in the thread. (Canceled) Link A member with a 300 was sent a set to test, judging from the part numbers and pictures they look to be the same but will have a definitive answer soon if they will work on the 300's. Video of the prototypes in action.
Link to original page on YouTube.
__________________________________________________
MCRA.com Last futzed with by DCMoney; February 10th, 2014 at 12:49 PM. |
|
February 2nd, 2014, 07:52 AM | #2 |
ninjette.org guru
Name: Andrew
Location: St Louis
Join Date: Sep 2013 Motorcycle(s): Ducati 1198s, Triumph D675, Suzuki SV1000s, `08 Ninja 250, `11 Ninja 250, Suzuki GS750 Posts: 368
|
10 more sets made yesterday!
1 sets remaining.
__________________________________________________
MCRA.com Last futzed with by DCMoney; February 9th, 2014 at 08:42 PM. Reason: Updated Quantity |
|
February 2nd, 2014, 08:06 AM | #3 |
Board Member
Name: ...
Location: WI
Join Date: Dec 2011 Motorcycle(s): 250R (street), 250R (dirt) Posts: A lot.
|
Money sent for 1 set.
|
|
May 8th, 2015, 03:33 PM | #5 |
Gear crash test dummy
Name: Max
Location: South Bay (So. Cal)
Join Date: May 2011 Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r Posts: A lot.
|
So since this thread is only 15 months old I imagine it's safe to assume there are plenty more of these available?
__________________________________________________
CVMA #531 |
|
May 8th, 2015, 03:46 PM | #6 |
ninjette.org guru
Name: Andrew
Location: St Louis
Join Date: Sep 2013 Motorcycle(s): Ducati 1198s, Triumph D675, Suzuki SV1000s, `08 Ninja 250, `11 Ninja 250, Suzuki GS750 Posts: 368
|
I make them to order. Shipped out 2 sets last week.
__________________________________________________
MCRA.com |
1 out of 1 members found this post helpful. |
May 8th, 2015, 09:24 PM | #7 |
Gear crash test dummy
Name: Max
Location: South Bay (So. Cal)
Join Date: May 2011 Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r Posts: A lot.
|
I'm in!
Let me know when is good to paypal you (I would assume now.. hah)
__________________________________________________
CVMA #531 |
|
May 9th, 2015, 05:51 AM | #8 |
RIP Alex
Name: Cuong
Location: Houston, TX
Join Date: Apr 2011 Motorcycle(s): '10 250r, '09 265r Posts: A lot.
Blog Entries: 2
|
in as well!
__________________________________________________
HalfFast Racing Team Serving Greater Houston Area Riders:WFO Riders MotoHouston HPC CMRA Ride Smart Fastline Lone Star Track Days |
|
May 9th, 2015, 06:54 AM | #9 |
ninjette.org guru
Name: Andrew
Location: St Louis
Join Date: Sep 2013 Motorcycle(s): Ducati 1198s, Triumph D675, Suzuki SV1000s, `08 Ninja 250, `11 Ninja 250, Suzuki GS750 Posts: 368
|
I also made a few front spacers (not captive) to replace the speedo sensor. I am testing these at my next race event in 2 week.
I know of at least 1 guy that wants one, they are going to be $15 shipped if anyone else is interseted.
__________________________________________________
MCRA.com |
|
May 9th, 2015, 12:12 PM | #10 |
ninjette.org member
Name: Jeff
Location: Georgetown, Ohio
Join Date: Jul 2013 Motorcycle(s): 08 Ninja 250R 81 GPZ 550 84 FJ1100 04 HD FLHCUI 12 S1000RR Posts: 13
|
In also. PM sent.
|
|
May 9th, 2015, 12:47 PM | #11 |
Track Clown
Name: Chris
Location: Kingman, AZ
Join Date: May 2012 Motorcycle(s): '08 250R, 21 MV F3 800, Kawasaki 400 build Posts: A lot.
MOTM - Sep '15
|
took me a while to figure out what you were trying to sell in the video. showing the differences in design may help too.
|
|
June 1st, 2015, 06:00 AM | #12 |
ninjette.org guru
Name: Andrew
Location: St Louis
Join Date: Sep 2013 Motorcycle(s): Ducati 1198s, Triumph D675, Suzuki SV1000s, `08 Ninja 250, `11 Ninja 250, Suzuki GS750 Posts: 368
|
Front speedo replacement spacer now available $13 shipped.
Items are made to order usually on Saturdays then shipped out Monday after order has been placed.
__________________________________________________
MCRA.com |
1 out of 1 members found this post helpful. |
June 6th, 2015, 08:14 PM | #13 |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
OK, I am interested in getting a couple for two different bikes. So what makes these captive and how would I take them back out when I need to replace my bearings?
|
|
June 6th, 2015, 08:42 PM | #14 | |
ninjette.org guru
Name: Andrew
Location: St Louis
Join Date: Sep 2013 Motorcycle(s): Ducati 1198s, Triumph D675, Suzuki SV1000s, `08 Ninja 250, `11 Ninja 250, Suzuki GS750 Posts: 368
|
Quote:
The front spacer is not captive. Example of one I made for my RC390.
__________________________________________________
MCRA.com |
|
|
September 1st, 2015, 02:53 PM | #15 |
Gear crash test dummy
Name: Max
Location: South Bay (So. Cal)
Join Date: May 2011 Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r Posts: A lot.
|
Are you making spacers for RC390 for others?
I have friends that are buying those bikes up to race and they'd probably be interested.
__________________________________________________
CVMA #531 |
|
September 1st, 2015, 04:26 PM | #16 | |
ninjette.org guru
Name: Andrew
Location: St Louis
Join Date: Sep 2013 Motorcycle(s): Ducati 1198s, Triumph D675, Suzuki SV1000s, `08 Ninja 250, `11 Ninja 250, Suzuki GS750 Posts: 368
|
Quote:
Thanks for the consideration though.
__________________________________________________
MCRA.com |
|
|
April 28th, 2016, 04:53 AM | #18 | |
ninjette.org guru
Name: Andrew
Location: St Louis
Join Date: Sep 2013 Motorcycle(s): Ducati 1198s, Triumph D675, Suzuki SV1000s, `08 Ninja 250, `11 Ninja 250, Suzuki GS750 Posts: 368
|
Quote:
__________________________________________________
MCRA.com |
|
|
April 28th, 2016, 07:37 AM | #19 |
Track Clown
Name: Chris
Location: Kingman, AZ
Join Date: May 2012 Motorcycle(s): '08 250R, 21 MV F3 800, Kawasaki 400 build Posts: A lot.
MOTM - Sep '15
|
Im down for the speedo elimination spacer.
|
|
April 28th, 2016, 08:11 AM | #20 |
ninjette.org guru
Name: Andrew
Location: St Louis
Join Date: Sep 2013 Motorcycle(s): Ducati 1198s, Triumph D675, Suzuki SV1000s, `08 Ninja 250, `11 Ninja 250, Suzuki GS750 Posts: 368
|
$13 shipped, can get it in the mail tomorrow.
__________________________________________________
MCRA.com |
|
April 28th, 2016, 09:17 AM | #21 |
ninjette.org member
Name: Norm
Location: Vancouver, BC
Join Date: Aug 2014 Motorcycle(s): '10 Ninja 250 track bike, '06 Goldwing, '81 HD FXB Posts: 30
|
__________________________________________________
|
|
April 28th, 2016, 09:45 AM | #22 |
Slower than you.
Name: toEleven
Location: NoVA
Join Date: Oct 2015 Motorcycle(s): CBR600RR, CB750, EX300 (半蔵) Posts: 667
MOTM - May '16
|
Did you ever get a conclusion on the 300 fit?
__________________________________________________
DISCLAIMERv1.0: There may be more info on the topic than this forum post. Conduct your own research. If another thread is linked or quoted, go read it yourself. |
|
April 28th, 2016, 10:58 AM | #23 |
ninjette.org guru
Name: Andrew
Location: St Louis
Join Date: Sep 2013 Motorcycle(s): Ducati 1198s, Triumph D675, Suzuki SV1000s, `08 Ninja 250, `11 Ninja 250, Suzuki GS750 Posts: 368
|
I never did get confirmation from the guy.
__________________________________________________
MCRA.com |
|
April 29th, 2016, 12:36 PM | #24 |
Gear crash test dummy
Name: Max
Location: South Bay (So. Cal)
Join Date: May 2011 Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r Posts: A lot.
|
FWIW I've got Andrew's spacers all over my bike. Fast shipping, great communication, excellent product.
A++++++++ great seller!
__________________________________________________
CVMA #531 |
|
October 24th, 2016, 10:57 AM | #25 |
ninjette.org newbie
Name: Mike
Location: katy tx
Join Date: Oct 2016 Motorcycle(s): 2013 ninja 300 Posts: 1
|
i know this is an old post... but are you still making the captive spacers?
|
|
October 24th, 2016, 02:31 PM | #26 | |
ninjette.org guru
Name: Andrew
Location: St Louis
Join Date: Sep 2013 Motorcycle(s): Ducati 1198s, Triumph D675, Suzuki SV1000s, `08 Ninja 250, `11 Ninja 250, Suzuki GS750 Posts: 368
|
Quote:
Thanks, Andrew
__________________________________________________
MCRA.com |
|
|
January 23rd, 2017, 12:56 PM | #27 |
ninjette.org member
Name: Wesley
Location: San Luis Obispo
Join Date: Feb 2013 Motorcycle(s): 1999 Ninja 250ex 1989 Ninja 250ex 2005 Ninja 250ex 2007 Ninja 250ex 2011 Ninja 250r 1993 CBR600 Posts: 199
|
PM'd.
__________________________________________________
"I had so much fun crashing my Ninja" - Said by No One Ever |
|
January 23rd, 2017, 06:16 PM | #28 |
ninjette.org guru
Name: Andrew
Location: St Louis
Join Date: Sep 2013 Motorcycle(s): Ducati 1198s, Triumph D675, Suzuki SV1000s, `08 Ninja 250, `11 Ninja 250, Suzuki GS750 Posts: 368
|
No longer making spacers.
Thanks everyone!
__________________________________________________
MCRA.com |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Ninja 250 Captive Spacers | DCMoney | Ninjettes At Speed | 47 | February 26th, 2024 10:48 AM |
Captive rear brake hanger | smokinsingle | Ninjettes At Speed | 29 | February 5th, 2013 08:58 PM |
|
|