September 20th, 2016, 05:48 AM | #1 |
ninjette.org member
Name: Brian
Location: NW USA
Join Date: Aug 2016 Motorcycle(s): Triumph Bonneville, Ninja 300 Posts: 204
|
FS: Ninja 300 Street-Specific Parts
Hi all. I'm just about done with converting my 300 over to full-race duty. Which means I gots parts for you! Pretty much anything that you'd use on a street bike but not on a race bike, I have available. The following list are bits I know I have. If you need something and it's not on there, ask! I might have it. Prices are negotiable, especially if you want to bundle a few things. I'm basing prices off what they're going for on eBay with a healthy dose of common sense. Prices include basic shipping to the ConUS and should be paid via Paypal. I'll try to get some pictures up in the next week or so. I'm Burphel on eBay if you want to do some light stalking. Last I checked I was at around 130 reviews 100% positive.
*Almost complete set of gloss black Chinese-knockoff street bodywork. These were mounted on the bike when I bought it, but were very gently used. The ABS is plenty thick, fit isn't quite perfect but very close, same for the paint (no scratches, just not quite OEM quality). From 5 feet away, you won't know the difference. This includes all painted bits *except the front fender* plus the belly pan. Does not include hardware. Also includes smoked front turn signals. Does not included the textured infills, airbox panels, front radiator shroud or battery box; along with the front fender. These are going for $400 on ebay shipped (literally) from the socialist worker's paradise. I'm thinking $300. *Kickstand/springs/bolt (KS switch not included). $25. *Headlight assembly. Very slight scratch on one of the edges. Includes all wiring and the main bulbs (they look ok, but I forgot to check if they work before disassembly). Side/pilot bulb thingies are missing, but the sockets are there. All mounting tabs intact. $100 *Rear brake light assembly. Includes bulb (again, didn't test it but it looks ok) and wiring. $15 *Radiator fan and rear shroud-thingy. $20 *Rear brake switch. $10 *Rear fender assembly. Includes plate light and turn signals. $35 *Passenger seat. $20 *Stock tires (IRC RoadWinners). Don't know the mileage, but very little. $75 for the pair? *Horn. Are you serious? $10 or I'll throw it in with something else. *Mirrors. Includes pivot bracket thingy. No scratches, glass good. $20 for the pair Stuff that's already sold/not available: Fork springs Windscreen Front fender Kickstand switch Left side switchgear Pic of the bike in full street trim:
__________________________________________________
Let he who has never re-used a crush washer cast the first stone... Last futzed with by Burphel; October 3rd, 2016 at 02:18 AM. |
|
September 30th, 2016, 11:56 AM | #2 |
ninjette.org guru
Name: Miguel
Location: TN
Join Date: Jan 2015 Motorcycle(s): 2000 EX-250; several other years of the same Posts: 460
|
Did you upgrade the front fork springs? I'm looking for stock ones for my pregen 250.
__________________________________________________
... can't stop updating the bike! |
|
September 30th, 2016, 09:20 PM | #3 |
ninjette.org member
Name: Brian
Location: NW USA
Join Date: Aug 2016 Motorcycle(s): Triumph Bonneville, Ninja 300 Posts: 204
|
PM sent
__________________________________________________
Let he who has never re-used a crush washer cast the first stone... |
|
October 1st, 2016, 05:28 PM | #4 |
Certifiable nontundrum
Name: Harper
Location: NC Milkshake stand
Join Date: Mar 2013 Motorcycle(s): 2013 SE NINJA 300 Posts: Too much.
MOTM - Sep '13, Sep '16
|
Ooooooh bits n pieces... Lemme count my coins
__________________________________________________
|
|
October 6th, 2016, 03:36 PM | #5 |
ninjette.org member
Name: CJ
Location: Oregon
Join Date: Mar 2015 Motorcycle(s): Ninja 300, GSXR 600, CBR 500 Posts: 20
|
Hey I'm interested in those street plastics! Can you bring them if you go to MAC on Sat? Thank you
__________________________________________________
~ The way to go fast is to never slow down ~ |
|
October 23rd, 2016, 02:07 PM | #6 |
Wannabe Reborn
Name: Unregistered
Location: Cincy Ohio
Join Date: Mar 2009 Motorcycle(s): Blue 2008 Ninja 250 Posts: 302
|
Any chance your selling exhaust?
__________________________________________________
" If you're here to show off and prove that your crotch rocket is faster than my Harley, you can leave now. " |
|
October 23rd, 2016, 03:14 PM | #7 |
ninjette.org member
Name: Brian
Location: NW USA
Join Date: Aug 2016 Motorcycle(s): Triumph Bonneville, Ninja 300 Posts: 204
|
Yeah. Although it might take a while to get it to ya. It's still on the bike, in storage. It'll be at least a week before I can get out there to pull it, and then it depends on weather (working outside). This one has no O2 sensor plug and there's some light surface rust on the headers and muffler end (hidden by bodywork/heat shield). I'd probably go $100 shipped for the headers/can/heat shields. If you're interested, I'll PM you when I can get it done.
__________________________________________________
Let he who has never re-used a crush washer cast the first stone... |
|
January 23rd, 2017, 09:29 PM | #8 |
ninjette.org member
Name: Andrew
Location: Orlando, FL
Join Date: Jun 2011 Motorcycle(s): 2014 300 Posts: 162
|
Is the passenger seat still for sale?
|
|
January 27th, 2017, 01:58 AM | #9 |
ninjette.org member
Name: Brian
Location: NW USA
Join Date: Aug 2016 Motorcycle(s): Triumph Bonneville, Ninja 300 Posts: 204
|
Sorry for the delay. I moved and haven't really unpacked the parts boxes. I think I still have it, I'll check tomorrow.
__________________________________________________
Let he who has never re-used a crush washer cast the first stone... |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
PARTS NINJAS FIRST NINJA 300 PART OUT! Full 2013 Ninja 300 in good shape! NEED PARTS? | PartsNinja | Motorcycle-related | 75 | October 23rd, 2016 04:08 PM |
2009 Ninja parts - all street parts for sale | krunkfoo | Motorcycle-related | 52 | July 26th, 2013 07:55 PM |
New 300-specific forum area | Alex | 2013 - 2017 Ninja 300 General Discussion | 0 | October 1st, 2012 02:44 PM |
[sportrider - latest stories] - Leatt to introduce street/sport-specific neck brace a | Ninjette Newsbot | Motorcycling News | 0 | February 13th, 2011 01:40 PM |
09 Ninja Cup street take-off parts for sale | tim61 | Motorcycle-related | 24 | November 5th, 2010 12:33 PM |
|
|