Pre group buy for digital gauges

jonnyc · August 20th, 2011, 02:22 PM

For some reason I could not post on the classifieds section but it might fit better here anyways. Alex you can move where ever you think it fits better.

Ok the big question how many of you guys would be willing to buy a universal digital gauge for under $100?

The plan is: I buy one nice looking Chinese made gauge. They seem of decent quality in the few pictures I have seen. It looks a lot like the Koso , obviously not as many futures and not expecting the same build quality. I am expecting it to be of decent quality, every future should be usable and accurate.

Once I get the gauge I will begin the process of installing it, I will document and take pictures of the installation and compile it into a DIY. will review the gauge and give sincere thoughts about quality, accuracy, looks, durability etc.

Wile doing all this I will be in talks with the supplier to negotiate a better price. I will have to give him a figure on how many people I expect to buy. Once we agree on price, we will start the actual group buy, hopefully most people that originally sign up will go through with the buy. Once we pay for the merchandise it would be ship to me, where I will separate individually and send to the respective addresses.

So again the question,This is assuming that after my review we find out that the gauge is of good quality, durability, accuracy etc.
are you in the market for a decent/good digital gauge for under $100?
I am not asking for people to commit, I am trying to figure out if there is a marker for lower end gauges (=<$100) that work as advertised or if most people would tick to brand name stuff.
The RPMs on the gauge below only go to 11k but the seller says he also has some that go to 14k.

Here are futures of the gauge
RPM meter
Speedometer
Tachometer
Fuel quantity
Clock
L/R turn signal light
High beam light
Neutral/park light
Water temp
Trip meter

Trailerboy531 · August 20th, 2011, 02:26 PM

Unless I'm having an off morning I'm fairly sure our bikes rev higher than that gauge displays.

Also, neutral light?
How the the fuel quantity displayed?

jonnyc · August 20th, 2011, 02:36 PM

Quote:

Originally Posted by Trailerboy531

Unless I'm having an off morning I'm fairly sure our bikes rev higher than that gauge displays.

Also, neutral light?
How the the fuel quantity displayed?

MORNING?
Yeah sorry about that, they don't have good English and I copied and pasted a few things. I'll fix it.
I think they meant to say
Nuetral/parking light instead of shift/brake light.

As far as rpm he said they have one that goes up to 14k

Kevin2109 · August 20th, 2011, 03:41 PM

HOLY crap! thats awesome, please report. I would be all over this!

DarC · August 20th, 2011, 03:50 PM

^^^^^X2

Kevin2109 · August 20th, 2011, 04:16 PM

Would a 636 gauge fin on our bikes? Of course with a little modding

austexjg · August 20th, 2011, 04:19 PM

I would take a serious look once you do the install and review.

GottaLoveLucy · August 20th, 2011, 04:23 PM

Wow, this is my one qualm with my little ninja...the lack of digital readouts. How difficult is one of these to install? I'll definitely keep looking back for updates

jonnyc · August 20th, 2011, 04:27 PM

Quote:

Originally Posted by austexjg

I would take a serious look once you do the install and review.

I am not asking anyone to commit to anything. I am simply asking that if the Gauge turns out to be good, would you buy it (good for the price/good value) or do you prefer to just get brand name stuff? Abviously if it turns out to be a dud no one is going to want it.

What I am trying to figure out is if there is a marker for lower end gauges that still good or if most people would stick to brand name $300 gauges.

Cuongism · August 20th, 2011, 04:41 PM

If it works, I'm in

jonnyc · August 20th, 2011, 04:47 PM

So I am going to start a list, like I said before this is more to count how many people are interested and if the gauge turns out good they will get first dibs incase there is a good demand. You are not actually committing to anything.

If interested (you have the $$ and want to replace the stock gauge) add yourself to the list.
Potential buyers:

Cuongism

the big mike · August 20th, 2011, 04:58 PM

I am very interested as well but I don't easily get convinced, I'll wait for your review.
And as I have no knowledge about this: how cheap is <100 USD compared to other gauges?

Potential buyers:
1. Cuongism
2. The big mike

Kevin2109 · August 20th, 2011, 05:11 PM

Potential buyers:
1. Cuongism
2. The big mike
3. Kevin2109

ninjagaiden09 · August 20th, 2011, 06:41 PM

Potential buyers:
1. Cuongism
2. The big mike
3. Kevin2109
4. Ninjagaiden

jonnyc · August 20th, 2011, 07:00 PM

Quote:

Originally Posted by Kevin2109

Would a 636 gauge fin on our bikes? Of course with a little modding

Has anyone tried this? I would actually rather do that since we know the quality is great, but I have never seen it done.

vnranger · August 21st, 2011, 10:14 AM

Potential buyers:
1. Cuongism
2. The big mike
3. Kevin2109
4. Ninjagaiden
5. Vnranger

Minnesotah · August 21st, 2011, 11:18 AM

Potential buyers:
1. Cuongism
2. The big mike
3. Kevin2109
4. Ninjagaiden
5. Vnranger
6. Minnesotah

bob706 · August 21st, 2011, 11:56 AM

Potential buyers:
1. Cuongism
2. The big mike
3. Kevin2109
4. Ninjagaiden
5. Vnranger
6. Minnesotah
7. bob706

etiainen · August 21st, 2011, 01:22 PM

Potential buyers:
1. Cuongism
2. The big mike
3. Kevin2109
4. Ninjagaiden
5. Vnranger
6. Minnesotah
7. bob706
8. etiainen

kaiserz · August 21st, 2011, 04:16 PM

Potential buyers:
1. Cuongism
2. The big mike
3. Kevin2109
4. Ninjagaiden
5. Vnranger
6. Minnesotah
7. bob706
8. etiainen
9. kaiserz

dk58 · August 21st, 2011, 04:26 PM

Potential buyers:
1. Cuongism
2. The big mike
3. Kevin2109
4. Ninjagaiden
5. Vnranger
6. Minnesotah
7. bob706
8. etiainen
9. kaiserz
10. dk58

adri99an · August 21st, 2011, 05:04 PM

1. Cuongism
2. The big mike
3. Kevin2109
4. Ninjagaiden
5. Vnranger
6. Minnesotah
7. bob706
8. etiainen
9. kaiserz
10. dk58
11. donger

nightmarechevy · August 21st, 2011, 05:30 PM

Pending accuracy and cleanliness of install, I am interested.

bkh2 · August 21st, 2011, 05:50 PM

Would the sub-$100 price include shipping (to Canada)? I may be interested, but will also be waiting on reviews.

headshrink · August 21st, 2011, 05:51 PM

If it is awesome, but I want to see how it turns out first.

wayanlam · August 21st, 2011, 07:25 PM

that's definitely a great deal for a digital cluster. but of course that depends on the quality, if its broken after 6 months because of some low quality build, then it would defeat the point of getting it in the 1st place.

however, a lot of people would jump on this opportunity if its available, since the Koso kits are too expensive for most.

found this info on the web~
http://www.aliexpress.com/fm-store/2...OSO-RX1N-.html

but is says that the product is not available anymore from that site~

you might need to make some sort of bracket to fit it into the OEM cluster hole, and possibly a P&P harness, so that people with less experience don't end up with a mess splicing the cables, lol

AeroXtasy · August 21st, 2011, 07:30 PM

I was getting a Koso, but I'm definitely in for this at that price.

1. Cuongism
2. The big mike
3. Kevin2109
4. Ninjagaiden
5. Vnranger
6. Minnesotah
7. bob706
8. etiainen
9. kaiserz
10. dk58
11. donger
12. AeroXtasy

Swampotter · August 21st, 2011, 08:02 PM

1. Cuongism
2. The big mike
3. Kevin2109
4. Ninjagaiden
5. Vnranger
6. Minnesotah
7. bob706
8. etiainen
9. kaiserz
10. dk58
11. donger
12. AeroXtasy
13. Swampotter

headshrink · August 21st, 2011, 08:38 PM

Honestly, the pictured unit does look pretty cheap...

Minnesotah · August 21st, 2011, 09:24 PM

Quote:

Originally Posted by headshrink

Honestly, the pictured unit does look pretty cheap...

Didn't your mama ever teach you "never judge a book by its cover"

Let us dream for a cheap alternative of good quality!

headshrink · August 21st, 2011, 09:30 PM

LOL, dream away.

jonnyc · August 22nd, 2011, 09:18 AM

Hey guys I need your help.
What size is the stock front tire? (xxx / xx-xx)
The manufacturer has to program the tire size.
I guess this would mean it could fit any tire. The only proven is that we might not be able to set this ourselves.

Here is the instructions, see if you guys can figure it out. At work and only looked at great for a sec.

CThunder-blue · August 22nd, 2011, 09:19 AM

I think the important questions should be:

1. How does it receive it's speed signal? How accurate is this method?
2. How do you plan on resolving the L/R turn signal indicators? the 08-09 models have 1 wire harnesses.

Crriiissss · August 22nd, 2011, 09:22 AM

1. Cuongism
2. The big mike
3. Kevin2109
4. Ninjagaiden
5. Vnranger
6. Minnesotah
7. bob706
8. etiainen
9. kaiserz
10. dk58
11. donger
12. AeroXtasy
13. Swampotter
14. Crriiissss

jonnyc · August 22nd, 2011, 09:26 AM

Quote:

Originally Posted by CThunder-blue

I think the important questions should be:

1. How does it receive it's speed signal? How accurate is this method?
2. How do you plan on resolving the L/R turn signal indicators? the 08-09 models have 1 wire harnesses.

You have to install a magnet and sensor in the wheel
Don't know the accuracy. I think stock system uses something similar.

How does the stock guage know what blinked is turned on?

CThunder-blue · August 22nd, 2011, 09:29 AM

The stock gauge has only 1 light. Both harnesses from the turn signals converge into a single wire which leads to the light.

Magnet and sensor is the same pick up used in the Koso gauge, so it should be accurate. It wouldn't surprise me if they either manufacture them for koso or just stole the design.

Kevin2109 · August 22nd, 2011, 09:34 AM

http://cgi.ebay.com/ebaymotors/LCD-d...ht_2361wt_1165

CThunder-blue · August 22nd, 2011, 09:51 AM

If that's the same setup, then I wonder about how accurate the speed will be. My koso speedo came with 6 magnets, not 1. Although I guess as long it's calibrated right, it shouldn't be a huge issue. The one thing is that it will not likely be sensitive to changes in speed very quickly. The more magnets the speedo can read, the better/faster it is at changing the speed read out. I wonder if you could hack the koso speedo to work on this gauge tho?

Other things you would need to address:

Water temperature- does it come with any sensors? If not, water temp isn't going to work. What does it use to trigger the oil light?

I'm not trying to ruin your potential project. I think it's great you're going to go for it. I just want you to be ready for all the little things the seller isn't telling you.

Kevin2109 · August 22nd, 2011, 09:55 AM

Is it the same problem with all the aftermarket ones besides koso? I want to put a ZX10r gauge on mine, is it possible?

CThunder-blue · August 22nd, 2011, 10:02 AM

Unless the zx10 uses the same mechanical sensor, u will likely need to figure out a way to give it an electronic signal. Only the tach is electrical afaik.

August 20th, 2011, 03:41 PM	#4
Kevin2109 KThanksBye Name: Kevin Location: Orange County Join Date: Mar 2011 Motorcycle(s): 2006 zx636r Posts: A lot.	HOLY crap! thats awesome, please report. I would be all over this! __________________________________________________ ----> My Youtube! <---- Unregistered, watch my youtube page!

August 20th, 2011, 03:50 PM	#5
DarC DUCEATR Name: Dan Location: El Paso, Texas Join Date: Apr 2011 Motorcycle(s): RVT1000R Posts: 628	^^^^^X2 __________________________________________________ 2001 SP1 RC51- #62 -Akrapovic Ti, PCIII, Colin Edward's first baby tooth, Honda Racing sticker, some Japanese doods best attempt at Engrish scribbled on my engine block, little touch of soul.

August 20th, 2011, 04:16 PM	#6
Kevin2109 KThanksBye Name: Kevin Location: Orange County Join Date: Mar 2011 Motorcycle(s): 2006 zx636r Posts: A lot.	Would a 636 gauge fin on our bikes? Of course with a little modding __________________________________________________ ----> My Youtube! <---- Unregistered, watch my youtube page!

August 20th, 2011, 04:23 PM	#8
GottaLoveLucy ninjette.org newbie Name: Sara Location: Cincinnati OH Join Date: Aug 2011 Motorcycle(s): 2008 Ninja 250- Red (First Bike- aka Lucy) Posts: 8	Epic Wow, this is my one qualm with my little ninja...the lack of digital readouts. How difficult is one of these to install? I'll definitely keep looking back for updates

August 20th, 2011, 04:47 PM	#11
jonnyc ninjette.org member Name: Jon Location: NYC Join Date: Jul 2011 Motorcycle(s): 250 Posts: 129	So I am going to start a list, like I said before this is more to count how many people are interested and if the gauge turns out good they will get first dibs incase there is a good demand. You are not actually committing to anything. If interested (you have the $$ and want to replace the stock gauge) add yourself to the list. Potential buyers: Cuongism

August 20th, 2011, 02:26 PM	#2
Trailerboy531 Gear crash test dummy Name: Max Location: South Bay (So. Cal) Join Date: May 2011 Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r Posts: A lot.	Unless I'm having an off morning I'm fairly sure our bikes rev higher than that gauge displays. Also, neutral light? How the the fuel quantity displayed?

August 20th, 2011, 04:19 PM	#7
austexjg ninjette.org sage Name: J.G. Location: Austin Join Date: Oct 2009 Motorcycle(s): '09 zx6r Green/Black, (ex-)Diablo Black '09 Ninja 250r Posts: 959	I would take a serious look once you do the install and review.

August 20th, 2011, 04:41 PM	#10
Cuongism ninjette.org certified postwhore Name: Cuong Location: San Diego Join Date: Jul 2010 Motorcycle(s): 2008 Ninja 250r, 2007 Daytona 675 Posts: A lot.	If it works, I'm in

August 20th, 2011, 04:58 PM	#12
the big mike ninjette.org sage Name: Michael Location: Belgium Join Date: Apr 2011 Motorcycle(s): 2008 Ninja 250r, Fazer8 Posts: 580	I am very interested as well but I don't easily get convinced, I'll wait for your review. And as I have no knowledge about this: how cheap is <100 USD compared to other gauges? Potential buyers: 1. Cuongism 2. The big mike __________________________________________________ I can not be a true player by playing around.

August 20th, 2011, 05:11 PM	#13
Kevin2109 KThanksBye Name: Kevin Location: Orange County Join Date: Mar 2011 Motorcycle(s): 2006 zx636r Posts: A lot.	Potential buyers: 1. Cuongism 2. The big mike 3. Kevin2109 __________________________________________________ ----> My Youtube! <---- Unregistered, watch my youtube page!

August 20th, 2011, 06:41 PM	#14
ninjagaiden09 ninjette.org member Name: Mel Location: Toronto Join Date: Jul 2011 Motorcycle(s): 2011 Ninja 250r Posts: 126	Count me in , if everthing works ok. Potential buyers: 1. Cuongism 2. The big mike 3. Kevin2109 4. Ninjagaiden

August 21st, 2011, 10:14 AM	#16
vnranger ninjette.org sage Name: Jonathan Location: Beaverton OR Join Date: Jul 2010 Motorcycle(s): Candy Thunder blue 2009 kawasaki 250r, 2010 Dark Stealth Ducati Monster 696. Posts: 891	is it easy to install like plug and play? Any way count me in Potential buyers: 1. Cuongism 2. The big mike 3. Kevin2109 4. Ninjagaiden 5. Vnranger

August 21st, 2011, 11:18 AM	#17
Minnesotah Did you get him? Name: Myke Location: Portland, Oregon Join Date: Jul 2010 Motorcycle(s): 2009 2fiddy SE Posts: 54	Potential buyers: 1. Cuongism 2. The big mike 3. Kevin2109 4. Ninjagaiden 5. Vnranger 6. Minnesotah

August 21st, 2011, 11:56 AM	#18
bob706 ninjette.org certified postwhore Name: Sean Location: Mary Esther, FL Join Date: Jan 2009 Motorcycle(s): 2008 Ninja 250 1998 HD Road King Posts: A lot.	Potential buyers: 1. Cuongism 2. The big mike 3. Kevin2109 4. Ninjagaiden 5. Vnranger 6. Minnesotah 7. bob706 __________________________________________________ http://sandollarmotorcycleclub.com/

August 21st, 2011, 01:22 PM	#19
etiainen CBR250R Traitor Name: Jon Location: Greater Philadelphia Area Join Date: Jun 2011 Motorcycle(s): 2011 Red CBR250R 2009 Ninja 250r SE(With 2008 Fairings)(sold) Posts: 924	Potential buyers: 1. Cuongism 2. The big mike 3. Kevin2109 4. Ninjagaiden 5. Vnranger 6. Minnesotah 7. bob706 8. etiainen

August 21st, 2011, 04:16 PM	#20
kaiserz There's a limit to s2pdty Name: A.D. Location: NoVa the burg Join Date: Apr 2011 Motorcycle(s): 250r ninja (sold) Posts: A lot.	Potential buyers: 1. Cuongism 2. The big mike 3. Kevin2109 4. Ninjagaiden 5. Vnranger 6. Minnesotah 7. bob706 8. etiainen 9. kaiserz

August 21st, 2011, 04:26 PM	#21
dk58 ninjette.org member Name: Dan Location: Pittsburgh, PA Join Date: Sep 2010 Motorcycle(s): 10 Ninja 250R Posts: 160	Potential buyers: 1. Cuongism 2. The big mike 3. Kevin2109 4. Ninjagaiden 5. Vnranger 6. Minnesotah 7. bob706 8. etiainen 9. kaiserz 10. dk58

August 21st, 2011, 05:04 PM	#22
adri99an ninjette.org certified postwhore Name: Donger Location: So CAL Join Date: Dec 2009 Motorcycle(s): "Is that a Ninjer 1000?" Posts: A lot.	1. Cuongism 2. The big mike 3. Kevin2109 4. Ninjagaiden 5. Vnranger 6. Minnesotah 7. bob706 8. etiainen 9. kaiserz 10. dk58 11. donger

August 21st, 2011, 05:30 PM	#23
nightmarechevy ninjette.org member Name: Matt Location: San Angelo, TX Join Date: Aug 2011 Motorcycle(s): 2007 ZX6R Posts: 77	Pending accuracy and cleanliness of install, I am interested. __________________________________________________ 2012 Ninja 250 - SOLD 2007 Ninja ZX6R- 2 Bros exhaust, Puig w/s, OES sliders, hid high/low

August 21st, 2011, 05:50 PM	#24
bkh2 ninjette.org guru Name: Ben Location: R'lyeh Join Date: May 2011 Motorcycle(s): 2006 GSXR 750; 1983 CB750SC Posts: 277	Would the sub-$100 price include shipping (to Canada)? I may be interested, but will also be waiting on reviews.

August 21st, 2011, 05:51 PM	#25
headshrink ninjette.org certified postwhore Name: Bob Location: CA Join Date: Dec 2008 Motorcycle(s): '08 Ninja 250r, '14 CBR500r Posts: A lot.	If it is awesome, but I want to see how it turns out first. __________________________________________________ Honda Interceptor VFR800 DLX (2014, 8th gen) Honda CBR500r (2014) - FOR SALE Kawi Ninja 250r (2008) - Restored and passed-down within family, only to be abandoned

August 21st, 2011, 07:25 PM	#26
wayanlam ninjette.org certified postwhore Name: Wayan Location: Bali - Indonesia Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.	that's definitely a great deal for a digital cluster. but of course that depends on the quality, if its broken after 6 months because of some low quality build, then it would defeat the point of getting it in the 1st place. however, a lot of people would jump on this opportunity if its available, since the Koso kits are too expensive for most. found this info on the web~ http://www.aliexpress.com/fm-store/2...OSO-RX1N-.html but is says that the product is not available anymore from that site~ you might need to make some sort of bracket to fit it into the OEM cluster hole, and possibly a P&P harness, so that people with less experience don't end up with a mess splicing the cables, lol __________________________________________________ Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield

August 21st, 2011, 07:30 PM	#27
AeroXtasy New 2-Wheel Addict Name: Reece Location: Bardstown Join Date: Aug 2011 Motorcycle(s): Blue 2009 250r Kawasaki Ninja Posts: 129	I was getting a Koso, but I'm definitely in for this at that price. 1. Cuongism 2. The big mike 3. Kevin2109 4. Ninjagaiden 5. Vnranger 6. Minnesotah 7. bob706 8. etiainen 9. kaiserz 10. dk58 11. donger 12. AeroXtasy

August 21st, 2011, 08:02 PM	#28
Swampotter ninjette.org member Name: Matt Location: SoCal Join Date: Jul 2011 Motorcycle(s): CB550, CB750, Black '08 250r Posts: 42	1. Cuongism 2. The big mike 3. Kevin2109 4. Ninjagaiden 5. Vnranger 6. Minnesotah 7. bob706 8. etiainen 9. kaiserz 10. dk58 11. donger 12. AeroXtasy 13. Swampotter

August 21st, 2011, 08:38 PM	#29
headshrink ninjette.org certified postwhore Name: Bob Location: CA Join Date: Dec 2008 Motorcycle(s): '08 Ninja 250r, '14 CBR500r Posts: A lot.	Honestly, the pictured unit does look pretty cheap... __________________________________________________ Honda Interceptor VFR800 DLX (2014, 8th gen) Honda CBR500r (2014) - FOR SALE Kawi Ninja 250r (2008) - Restored and passed-down within family, only to be abandoned

August 21st, 2011, 09:30 PM	#31
headshrink ninjette.org certified postwhore Name: Bob Location: CA Join Date: Dec 2008 Motorcycle(s): '08 Ninja 250r, '14 CBR500r Posts: A lot.	LOL, dream away. __________________________________________________ Honda Interceptor VFR800 DLX (2014, 8th gen) Honda CBR500r (2014) - FOR SALE Kawi Ninja 250r (2008) - Restored and passed-down within family, only to be abandoned

August 22nd, 2011, 09:19 AM	#33
CThunder-blue ModMy250.com Name: Tri Location: St, Louis Join Date: Sep 2010 Motorcycle(s): 2009 Ninja 250R, 2005 R6 Posts: A lot.	I think the important questions should be: 1. How does it receive it's speed signal? How accurate is this method? 2. How do you plan on resolving the L/R turn signal indicators? the 08-09 models have 1 wire harnesses. __________________________________________________ The www.ModMy250.com guy

August 22nd, 2011, 09:22 AM	#34
Crriiissss ninjette.org member Name: Cristian Location: Look behind you Join Date: Aug 2011 Motorcycle(s): 2009 Ninja Thunder Blue(sold), 2004 Suzuki GS500f(sold), 2006 Ninja 250, 2013 Ninja 300 SE Posts: 70	1. Cuongism 2. The big mike 3. Kevin2109 4. Ninjagaiden 5. Vnranger 6. Minnesotah 7. bob706 8. etiainen 9. kaiserz 10. dk58 11. donger 12. AeroXtasy 13. Swampotter 14. Crriiissss

August 22nd, 2011, 09:29 AM	#36
CThunder-blue ModMy250.com Name: Tri Location: St, Louis Join Date: Sep 2010 Motorcycle(s): 2009 Ninja 250R, 2005 R6 Posts: A lot.	The stock gauge has only 1 light. Both harnesses from the turn signals converge into a single wire which leads to the light. Magnet and sensor is the same pick up used in the Koso gauge, so it should be accurate. It wouldn't surprise me if they either manufacture them for koso or just stole the design. __________________________________________________ The www.ModMy250.com guy

August 22nd, 2011, 09:34 AM	#37
Kevin2109 KThanksBye Name: Kevin Location: Orange County Join Date: Mar 2011 Motorcycle(s): 2006 zx636r Posts: A lot.	http://cgi.ebay.com/ebaymotors/LCD-d...ht_2361wt_1165 __________________________________________________ ----> My Youtube! <---- Unregistered, watch my youtube page!

August 22nd, 2011, 09:51 AM	#38
CThunder-blue ModMy250.com Name: Tri Location: St, Louis Join Date: Sep 2010 Motorcycle(s): 2009 Ninja 250R, 2005 R6 Posts: A lot.	If that's the same setup, then I wonder about how accurate the speed will be. My koso speedo came with 6 magnets, not 1. Although I guess as long it's calibrated right, it shouldn't be a huge issue. The one thing is that it will not likely be sensitive to changes in speed very quickly. The more magnets the speedo can read, the better/faster it is at changing the speed read out. I wonder if you could hack the koso speedo to work on this gauge tho? Other things you would need to address: Water temperature- does it come with any sensors? If not, water temp isn't going to work. What does it use to trigger the oil light? I'm not trying to ruin your potential project. I think it's great you're going to go for it. I just want you to be ready for all the little things the seller isn't telling you. __________________________________________________ The www.ModMy250.com guy

August 22nd, 2011, 09:55 AM	#39
Kevin2109 KThanksBye Name: Kevin Location: Orange County Join Date: Mar 2011 Motorcycle(s): 2006 zx636r Posts: A lot.	Is it the same problem with all the aftermarket ones besides koso? I want to put a ZX10r gauge on mine, is it possible? __________________________________________________ ----> My Youtube! <---- Unregistered, watch my youtube page!

August 22nd, 2011, 10:02 AM	#40
CThunder-blue ModMy250.com Name: Tri Location: St, Louis Join Date: Sep 2010 Motorcycle(s): 2009 Ninja 250R, 2005 R6 Posts: A lot.	Unless the zx10 uses the same mechanical sensor, u will likely need to figure out a way to give it an electronic signal. Only the tach is electrical afaik. __________________________________________________ The www.ModMy250.com guy

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
When's the next Koso group buy?	IF13	Motorcycle-related	23	March 18th, 2014 08:26 AM
pre-gens: possible group buy for orange side pods	Singh2jz	Motorcycle-related	6	April 29th, 2013 11:41 AM
danmoto digital gauges	Jordan91	2008 - 2012 Ninja 250R Farkles	4	December 29th, 2012 08:37 PM
Group Buy on Koso Gauges requested	RaceTech Electric	Motorcycle-related	228	July 16th, 2012 06:43 AM
Slingshot Pre Load Adjuster Group Buy	ztrack157	Motorcycle-related	24	May 31st, 2011 06:59 PM