Woodcraft clipon height question

Colezombie · July 12th, 2011, 12:02 AM

I am looking into getting the woodcraft clipons, but i am unsure of what height size to get. I have read a DIY on how to install them by kkim, but i had thought they were to be installed above the tripple. In the DIY kkim Installed his underneath and used a 2 1/2" rise.

Would a lower rise clamp create clearance issues?
I was hoping to get the lowest rise offered and install them on top
Of the tripple.

Thanks guys,
Cole

leed · July 12th, 2011, 12:30 AM

The Clip-On's that Woodcraft sells specifically for the New Gen 250R are designed to go under the triple tree, but actually end up sitting a little lower than a no-rise clip on mounted above the triple tree.

Having been said, if you purchase a no rise clipon with the correct ID for the fork tubes and mount them above the triple, you should be fine, but there are no guarantees! However, it may be some ease to hear that some clip-ons designed for the 250R (Namely the KTC and a few others) are specifically designed to be mounted above the triple tree.

Colezombie · July 12th, 2011, 01:45 AM

Gotcha,
Thanks leed, I think ill play it safe and get the same setup as kkim.

July 12th, 2011, 12:02 AM	#1
Colezombie ninjette.org member Name: Cole Location: Corpus Christi Join Date: Oct 2010 Motorcycle(s): 2009 Ninja 250r Posts: 20	Woodcraft clipon height question I am looking into getting the woodcraft clipons, but i am unsure of what height size to get. I have read a DIY on how to install them by kkim, but i had thought they were to be installed above the tripple. In the DIY kkim Installed his underneath and used a 2 1/2" rise. Would a lower rise clamp create clearance issues? I was hoping to get the lowest rise offered and install them on top Of the tripple. Thanks guys, Cole __________________________________________________ '09 250R woodcraft clip-ons 2 bros slip-on

July 12th, 2011, 01:45 AM	#3
Colezombie ninjette.org member Name: Cole Location: Corpus Christi Join Date: Oct 2010 Motorcycle(s): 2009 Ninja 250r Posts: 20	Gotcha, Thanks leed, I think ill play it safe and get the same setup as kkim. __________________________________________________ '09 250R woodcraft clip-ons 2 bros slip-on

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Are woodcraft clipon bars hollow?	ninja2007	Ninjettes At Speed	11	October 1st, 2014 08:36 PM
DIY- Woodcraft Clipon Install	kkim	2008 - 2012 Ninja 250R Tech Talk	503	October 9th, 2013 08:46 AM
Clipon Vortex or Woodcraft?	JaeL	2008 - 2012 Ninja 250R Tech Talk	16	August 16th, 2009 05:26 PM
woodcraft clipon towers	gizmogamez	Ninjettes At Speed	5	July 22nd, 2009 02:45 PM

July 12th, 2011, 12:30 AM	#2
leed ninjette.org sage Name: David Location: Loves Park, IL Join Date: Feb 2011 Motorcycle(s): Time will tell Posts: 969	The Clip-On's that Woodcraft sells specifically for the New Gen 250R are designed to go under the triple tree, but actually end up sitting a little lower than a no-rise clip on mounted above the triple tree. Having been said, if you purchase a no rise clipon with the correct ID for the fork tubes and mount them above the triple, you should be fine, but there are no guarantees! However, it may be some ease to hear that some clip-ons designed for the 250R (Namely the KTC and a few others) are specifically designed to be mounted above the triple tree.