April 13th, 2010, 11:36 PM | #1 |
wonton wonder.
Name: snowfish
Location: bay area
Join Date: Apr 2010 Motorcycle(s): 2010 ninja 250r Posts: 5
|
steering stem nut
was riding this afternoon and noticed that the nut on top of the triple clamp seemed loose. i stopped, twisted it and was able to unscrew it all the way out. pulled it out and screwed it back in, rode the few remaining blocks back home then tightened it with a wrench. is there anything else i need to check? this makes me worried. which bolts should i be checking every so often on the bike? the bike is brand new with less than 150 miles on the odometer. another thing, the bike would make a thumping noise when going over bumps and potholes, kinda like the front forks were bottoming out (the sound was coming from the front). would the loose steering stem nut have anything to do with that? i haven't ridden it much after i tightened the nut so i couldn't tell ya if the sound went away.
|
|
April 14th, 2010, 12:40 AM | #2 |
Join Date: Nov 2008 Posts: Too much.
|
take it back to the dealer and have them reinstall/check it. the bike is under warranty. you shouldn't have to deal with it and this can be a major problem if not remedied correctly.
|
|
April 14th, 2010, 07:12 AM | #3 |
ninjette.org certified postwhore
Name: Greg
Location: Rhode Island
Join Date: Apr 2009 Motorcycle(s): 2013 ZX6R 636 Posts: A lot.
|
+1 let the dealer check it. The sound could be the bearings/race. The dealer should also have an attachment to properly torque the collar the puts tension on the bearings/race. Then they can retorque the stem.
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Steering Stem Nut Tool | Lemonfresh | 2013 - 2017 Ninja 300 Tech Talk | 3 | April 6th, 2015 03:54 PM |
Steering Stem Nut Tool | Lemonfresh | 2008 - 2012 Ninja 250R Tech Talk | 5 | April 5th, 2015 08:30 AM |
Steering stem bearing | justdrew | 2008 - 2012 Ninja 250R Tech Talk | 3 | February 5th, 2015 07:57 AM |
Tighten the steering stem nut, please tell me how | coelgrim | 2008 - 2012 Ninja 250R Tech Talk | 23 | December 29th, 2012 03:24 AM |
|
|