ninjette.org

Go Back   ninjette.org > Marketplace > Motorcycle-related

Reply
 
Thread Tools
Old July 4th, 2012, 02:02 PM   #1
SlowBoyRacing
ninjette.org member
 
SlowBoyRacing's Avatar
 
Name: Mani
Location: NY
Join Date: Dec 2011

Motorcycle(s): ZX6-R and etc.

Posts: 137
Exclamation FS: 90 Degree Angled Valve Stems - Only $22.05 - Black, Red, Blue, Gold and Silver



From your favorite local vendor; 90 Degree Drop Forged Aluminum Angled Tire Valve Stems in various colors...

Available in:

-Black
-Red
-Silver
-Gold
-Blue


Available in both 11.3mm and 8.3mm


For our bikes and most Japanese bikes you will need the 11.3mm but if you have Carrozzeria, Galespeed, OZ, Marchesini, Marvic and BST wheels you will need the 8.3mm ones.

These are the same valve stems which come from the factory on the fancy italian bikes (Ducati, Aprillia, etc) and many MotoGP, WSBK, Moto2 teams use these valve stems.

Generally race teams like to run a different color valve stem than the wheel so that they can easily spot the valve stem.

They are made in Italy and are the same valves which are sold under the Ariete brand for much more.


What they do?

-Easier to check pressure and fill tires (specially on the front)
-Lighter than rubber stems - they weigh in at 11 grams each
-They are reusable, no need to replace them like rubber valves with each tire change
-Fixed to the wheel with a locking nut, can't bend, or be expelled from the wheel
-The angled quill reduces the effect of centrifugal force, which tends to fling the valve core outwards in a conventional valve, leading to loss of pressure in tires.


Installation

Torque the locking nut to 7-10 Nm


How much?

$22.05 shipped for the pair! (USA & Canada)

add $3 for international shipping outside of USA & Canada


How to purchase?

Use the specific buy now button that corresponds to the size/color of the stem you would like.


Typical delivery times are around 4 to 10 business days.


Simple payment, just use the BUY NOW button below to purchase your set!



11.3mm Black - Pair







---------------------------------------------------

11.3mm Silver - Pair







---------------------------------------------------

11.3mm Gold - Pair







---------------------------------------------------

11.3mm Red - Pair







---------------------------------------------------

11.3mm Blue - Pair







---------------------------------------------------

As always, if you have any questions you may PM me any time!
SlowBoyRacing is offline   Reply With Quote




Old July 11th, 2012, 12:27 AM   #2
USMCEvan
Crashing is just practice
 
USMCEvan's Avatar
 
Name: Evan
Location: Long Beach, CA
Join Date: Jun 2011

Motorcycle(s): 2009 Ninja ex250 (Tinkerbell); 2008 Ninja ex250 (Frankenstein)

Posts: 101
No green?
__________________________________________________
SEMPER FI
~*UNSTOPPABLE*~
Kawasaki - Green means GO!
USMCEvan is offline   Reply With Quote


Old July 11th, 2012, 06:23 PM   #3
SlowBoyRacing
ninjette.org member
 
SlowBoyRacing's Avatar
 
Name: Mani
Location: NY
Join Date: Dec 2011

Motorcycle(s): ZX6-R and etc.

Posts: 137
Quote:
Originally Posted by USMCEvan View Post
No green?
Sorry they only come in the 5 colors above.
SlowBoyRacing is offline   Reply With Quote


Old July 11th, 2012, 07:01 PM   #4
Kevin2109
KThanksBye
 
Kevin2109's Avatar
 
Name: Kevin
Location: Orange County
Join Date: Mar 2011

Motorcycle(s): 2006 zx636r

Posts: A lot.
I have yet to put mine on lol
__________________________________________________
----> My Youtube! <----
Unregistered, watch my youtube page!
Kevin2109 is offline   Reply With Quote


Old July 11th, 2012, 08:12 PM   #5
CynicalC
ninjette.org certified postwhore
 
CynicalC's Avatar
 
Name: Colin
Location: Bay Area
Join Date: Feb 2011

Motorcycle(s): '96 EX250

Posts: A lot.
Quote:
Originally Posted by USMCEvan View Post
No green?
Green only slows your bike down...
__________________________________________________
ǥ頻| 7. t~| h.
CynicalC is offline   Reply With Quote


Old July 13th, 2012, 08:55 PM   #6
A7xschecter6661
.......................
 
A7xschecter6661's Avatar
 
Name: Peter
Location: New York
Join Date: Jul 2011

Motorcycle(s): 2003 Yamaha R6

Posts: 113
I bought these off slowboy for my R6
A7xschecter6661 is offline   Reply With Quote


Old July 31st, 2012, 08:18 PM   #7
SlowBoyRacing
ninjette.org member
 
SlowBoyRacing's Avatar
 
Name: Mani
Location: NY
Join Date: Dec 2011

Motorcycle(s): ZX6-R and etc.

Posts: 137
All colors in stock and ship out daily.

One of the single best things you can do to make your bike more practical, safer and nicer looking.
SlowBoyRacing is offline   Reply With Quote


Old July 31st, 2012, 09:49 PM   #8
tooblekain
ninjette.org sage
 
tooblekain's Avatar
 
Name: Matt
Location: San Diego, CA
Join Date: May 2012

Motorcycle(s): 2007 Triumph Bonneville; 2008 Ninja 250r (trackbike)

Posts: 747
Just bought myself a pair gold ones for my 2Fiddy
__________________________________________________
*CVMA #312*SoCal Trackdays*BigHeadz Racing*Motion Pro*Factory Effex*Leatt Brace* Racetech *Bell * Woodcraft CFM*Vortex*Hotbodies*Surface Sun Systems*Braking*LiveWire Energy*Freegun Underwear
tooblekain is offline   Reply With Quote


Old August 12th, 2012, 08:15 PM   #9
SlowBoyRacing
ninjette.org member
 
SlowBoyRacing's Avatar
 
Name: Mani
Location: NY
Join Date: Dec 2011

Motorcycle(s): ZX6-R and etc.

Posts: 137
All colors are in stock and all orders continue to ship out daily as they are received
SlowBoyRacing is offline   Reply With Quote


Old September 1st, 2012, 03:44 PM   #10
jaesun
ninjette.org member
 
Name: Jason
Location: Germantown, MD
Join Date: Aug 2012

Motorcycle(s): 2013 Ducati Monster 796, 2005 Kawasaki Ninja 250R (sold), and 1985 Kawasaki GPZ900R (multiple winter project)

Posts: 177
I got mine yesterday in the mail. I just removed the wheels and plan to have new tires mounted and balanced tomorrow.

Now the big decision...

Do I point the stems to the right or left? I was thinking to the right since I usually use the side stand and would rather have the stem facing to the direction that's easiest to work with. But the brake discs are also on the right, so I should probably have them on pointing to the left. And I should be using the center stand anyway so I can spin the rear wheel.

Decisions decisions...
jaesun is offline   Reply With Quote


Old September 5th, 2012, 08:06 AM   #11
A7xschecter6661
.......................
 
A7xschecter6661's Avatar
 
Name: Peter
Location: New York
Join Date: Jul 2011

Motorcycle(s): 2003 Yamaha R6

Posts: 113
Quote:
Originally Posted by jaesun View Post
I got mine yesterday in the mail. I just removed the wheels and plan to have new tires mounted and balanced tomorrow.

Now the big decision...

Do I point the stems to the right or left? I was thinking to the right since I usually use the side stand and would rather have the stem facing to the direction that's easiest to work with. But the brake discs are also on the right, so I should probably have them on pointing to the left. And I should be using the center stand anyway so I can spin the rear wheel.

Decisions decisions...

I am late but I did mine off the right side, if you do them on the left where it leans it's just a pain. (I hate washing that side too)

Either way, on my bike I have 2 rotors in my way or 1 rotor and one sprocket
A7xschecter6661 is offline   Reply With Quote


Old September 5th, 2012, 07:11 PM   #12
jaesun
ninjette.org member
 
Name: Jason
Location: Germantown, MD
Join Date: Aug 2012

Motorcycle(s): 2013 Ducati Monster 796, 2005 Kawasaki Ninja 250R (sold), and 1985 Kawasaki GPZ900R (multiple winter project)

Posts: 177
I ended up having mine pointing to the left away from the disc brakes. I figured that I'd let the guy who was mounting my tires install them without any direction from me. It hasn't been that big of a deal so far. I did notice that the valve stems aren't locked into place and have some play. I hope this isn't because I don't have enough torque on the nut. I probably should have used some loctite just to make sure. Oh well.
jaesun is offline   Reply With Quote


Old October 5th, 2012, 09:10 PM   #13
SlowBoyRacing
ninjette.org member
 
SlowBoyRacing's Avatar
 
Name: Mani
Location: NY
Join Date: Dec 2011

Motorcycle(s): ZX6-R and etc.

Posts: 137
I get mine pointed to the right side because of the kickstand.

The nuts are locking nuts, once they are torqued they should be good to go.

If it isn't leaking, shouldn't be a problem, but next time you have the tire off, check the torque on those bad boys.

Between 62-88 in-lbs is the right torque.
SlowBoyRacing is offline   Reply With Quote


Old February 9th, 2013, 09:55 AM   #14
SlowBoyRacing
ninjette.org member
 
SlowBoyRacing's Avatar
 
Name: Mani
Location: NY
Join Date: Dec 2011

Motorcycle(s): ZX6-R and etc.

Posts: 137
Bump!

THese are all in stock and ready to go guys and gals.

Orders placed from USA will ship from USA and will take 1-3 business days for delivery.

Orders placed from Canada will ship from Canada and will take 2-5 business days for delivery.

Best quality products you can count on!
SlowBoyRacing is offline   Reply With Quote


Old February 22nd, 2013, 05:35 AM   #15
SlowBoyRacing
ninjette.org member
 
SlowBoyRacing's Avatar
 
Name: Mani
Location: NY
Join Date: Dec 2011

Motorcycle(s): ZX6-R and etc.

Posts: 137
All colors are in stock ready to ship!
SlowBoyRacing is offline   Reply With Quote


Old March 15th, 2013, 08:53 AM   #16
SlowBoyRacing
ninjette.org member
 
SlowBoyRacing's Avatar
 
Name: Mani
Location: NY
Join Date: Dec 2011

Motorcycle(s): ZX6-R and etc.

Posts: 137
Great addition to any street or track ninjette!
SlowBoyRacing is offline   Reply With Quote


Old March 15th, 2013, 08:55 AM   #17
dfox
ninjette.org sage
 
dfox's Avatar
 
Name: Fox
Location: Boston
Join Date: May 2012

Motorcycle(s): 08 250R

Posts: 885
hmm... these would rock.

maybe when i get new tires, hopefully later this summer.
dfox is offline   Reply With Quote


Old June 10th, 2013, 01:59 PM   #18
tooblekain
ninjette.org sage
 
tooblekain's Avatar
 
Name: Matt
Location: San Diego, CA
Join Date: May 2012

Motorcycle(s): 2007 Triumph Bonneville; 2008 Ninja 250r (trackbike)

Posts: 747
Bought another set of gold ones since I got a spare set of wheels.
__________________________________________________
*CVMA #312*SoCal Trackdays*BigHeadz Racing*Motion Pro*Factory Effex*Leatt Brace* Racetech *Bell * Woodcraft CFM*Vortex*Hotbodies*Surface Sun Systems*Braking*LiveWire Energy*Freegun Underwear
tooblekain is offline   Reply With Quote


Reply




Similar Threads
Thread Thread Starter Forum Replies Last Post
FS: 90 Degree Angled Valve Stems - Only $26.95 - Free Worldwide Shipping! SlowBoyRacing Motorcycle-related 1 February 19th, 2015 05:10 PM
Dropped bike off for valve adj. v. New valve stems? edxmon 2008 - 2012 Ninja 250R Tech Talk 14 July 17th, 2012 04:55 PM
FS: 90 Degree Angled Aluminum Valve Stems - $19.99 Shipped! SlowBoyRacing Motorcycle-related 82 June 12th, 2012 04:42 PM


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Motorcycle Safety Foundation

All times are GMT -7. The time now is 03:00 PM.


Website uptime monitoring Host-tracker.com
Powered by vBulletin®
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2022 DragonByte Technologies Ltd.
Except where otherwise noted, all site contents are Copyright 2022 ninjette.org, All rights reserved.