|
March 31st, 2024, 02:51 PM
|
#1 |
|
ninjette.org member
Name: rudy
Location: north carolina
Join Date: Mar 2024 Motorcycle(s): ninja ex250f Posts: 26
|
no spark
following previous posts ive read about putting a resistor in the gray wire for an aftermarket ignition which this bike had previous to buying it the bike would have a rough time starting but would start and i recently cleaned out the carbs but suddenly there is absolutely no spark from either plug or the coils themselves, i started with checking the battery and voltage is fine, all of the lights come on and engine cranks/tries to start it literally just will not give any spark and im confused as to why the only left over connections are these two that im not entirely sure as to where they go, any tips on where to go from here to diagnose this issue?
|
|
|
|
March 31st, 2024, 02:52 PM
|
#2 |
|
ninjette.org member
Name: rudy
Location: north carolina
Join Date: Mar 2024 Motorcycle(s): ninja ex250f Posts: 26
|
no spark
following previous posts ive read about putting a resistor in the gray wire for an aftermarket ignition which this bike had previous to buying it the bike would have a rough time starting but would start and i recently cleaned out the carbs but suddenly there is absolutely no spark from either plug or the coils themselves, i started with checking the battery and voltage is fine, all of the lights come on and engine cranks/tries to start it literally just will not give any spark, any tips on where to go from here to diagnose this issue?
|
|
|
|
|
April 1st, 2024, 01:18 PM
|
#3 |
|
Guy Who Enjoys Riding
Name: Jim
Location: North Carolina
Join Date: Jul 2016 Motorcycle(s): Ninja 250 Posts: A lot.
MOTM - Oct '18, Aug '17, Aug '16
|
All I can suggest is to go by the wiring diagram and check to see that you have the correct voltages at the ignition unit, the pickup coil's resistance is 100 to 150 ohms, that all the safety switches are connected and working as they should, etc. Any of the safety switches could be causing no-spark if a wire came loose, for example.
Page 212 shows ignition wiring. |
|
|
2 out of 2 members found this post helpful. |
|
April 2nd, 2024, 05:25 PM
|
#4 |
|
ninjette.org member
Name: rudy
Location: north carolina
Join Date: Mar 2024 Motorcycle(s): ninja ex250f Posts: 26
|
thank you i will take a look at these first
|
|
|
|
|
April 5th, 2024, 12:48 PM
|
#5 |
|
ninjette.org member
Name: rudy
Location: north carolina
Join Date: Mar 2024 Motorcycle(s): ninja ex250f Posts: 26
|
update it was the pulsar coil
|
|
|
|
|
April 5th, 2024, 01:51 PM
|
#6 | |
|
Guy Who Enjoys Riding
Name: Jim
Location: North Carolina
Join Date: Jul 2016 Motorcycle(s): Ninja 250 Posts: A lot.
MOTM - Oct '18, Aug '17, Aug '16
|
Quote:
|
|
|
|
|
 |
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 09 with no spark | Tsmith9233 | 2008 - 2012 Ninja 250R Tech Talk | 2 | July 3rd, 2020 09:24 AM |
| No spark | Oldskool | 1986 - 2007 Ninja 250R Tech Talk | 0 | May 7th, 2019 12:19 PM |
| no spark ??? | Racer x | 2008 - 2012 Ninja 250R Tech Talk | 4 | February 25th, 2014 09:08 PM |
| Removing spark spark plugs? | tsdexter | 2008 - 2012 Ninja 250R Tech Talk | 3 | June 26th, 2013 03:48 PM |
| Why no spark? | Flying Pig | 2008 - 2012 Ninja 250R Tech Talk | 12 | January 30th, 2012 01:13 AM |
|
|
