|
April 3rd, 2011, 06:21 PM
|
#1 |
|
ninjette.org newbie
Name: Manny
Location: Phoenix
Join Date: Mar 2011 Motorcycle(s): Ninja 250R Posts: 7
|
Rpm too high?
Well just to let you guys know i am both new to these forums and a new rider. I recently purchased a 2009 250r. I have not done any maintence on it so far and know absolutely nothing about motorcycle maintenance except lubing the chain. So to me it doesnt look right but when im cruising at 50mph the rpm is at about 6200k on 6th gear. Is this right or where should i start looking for troubles? I have been riding it for about two weeks and it didnt do this to start so is there something i did wrong?
|
|
|
|
April 3rd, 2011, 06:24 PM
|
#2 |
|
ninjette.org certified postwhore
Name: Brian
Location: Detroit, MI
Join Date: Jun 2010 Motorcycle(s): 2009 Ninja 250R Green Posts: A lot.
|
Yup thats the way its supposed to be. At 75mph we're at around 9k give or take. You'll get used to it. Welcome to the forum and riding. Have fun!
|
|
|
|
|
April 3rd, 2011, 07:20 PM
|
#3 |
|
ninjette.org member
Name: Brad
Location: Indiana
Join Date: Aug 2010 Motorcycle(s): 2011 KTM 990 ADV Posts: 234
|
Yep, that's how I double check for 5th gear, 55 is 65(hundred).
|
|
|
|
 |
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Just cleaned carbs - now stuttering at low RPM, fine at high RPM | Ohio | 2008 - 2012 Ninja 250R Tech Talk | 20 | August 5th, 2014 10:30 PM |
| High rpm running | mikromo | General Motorcycling Discussion | 4 | September 21st, 2013 09:46 AM |
| High handle bar vibration, hard to get into high RPM, is this normal? | jackliu239 | 1986 - 2007 Ninja 250R Tech Talk | 24 | September 19th, 2013 09:04 PM |
| High Idle RPM... | wayanlam | 2008 - 2012 Ninja 250R Tech Talk | 4 | July 20th, 2010 09:59 PM |
| RPM's on highway-a little high? | fiberoptx | 1986 - 2007 Ninja 250R Tech Talk | 1 | September 11th, 2009 08:50 PM |
|
|
