Universal Turn signals flush mount

[muzkur]

Hi there!

I bought a universal turn signals for kawasakis but dont fit in 250r:
http://shop.the2wheels.com/Flush-Mou...s-010-2-x2.htm

Now I'm wondering try another model:
http://shop.the2wheels.com/Universal...s-GP005-x2.htm

Anyone use that turn lights? They fit in 250r? Need some fixes?

I think that's the same model:


Thanks for all

[CThunder-blue]

It does require to extra modification to fit. Check this thread out:

http://www.ninjette.org/forums/showthread.php?t=73710

[DarC]

I have these on the 08 and there are two options to mount them.

1) Use 3M mounting tape and apply to the light to stick to bezel(black trim), and then between the bezel and your bodywork. This is how I initially mounted them up. You can't even tell they are "taped" on.

2) The proper fix is to use either a taped and threaded plastic tube or use some all thread and a tube nut to extend the threaded portion on the back so you can mount these using the supplied plastic nut/washer.

Easy fix with a trip to the hardware store. I alread had an electronic flasher relay so this was a very fast and great looking mod.

[muzkur]

Thanks for the help.

That 2nd way's was what I planned.
Maybe I can buy some plastic tube nuts to use like extensors. Or I can rip out the original nut and fix a new one.
Anyway, that turn lights model are better to use. The first model I bought dont fit in the original hole but isn't larger enough to cover the hole.