L.E.D Dioded mod, Plug and play!!

Syphontek · July 5th, 2012, 04:37 PM

I just installed four L.E.D turn signals on my bike, so I wanted to share some pictures of the no cut harness I made.

NDspd · July 6th, 2012, 05:09 PM

What parts did you use? What did you do? Pics only go so far.

Syphontek · July 7th, 2012, 07:11 PM

It's pretty straight forward, the parts I used are shown in image 1. I ordered some factory type plugs from Japan and I used two diodes. It took me about 3 minutes to hook up the harness I made.

If you have seen the no cut diode mod from modmy250 dot com, and I believe the how too is posted on this forum also, you would have noticed that you have to remove a wire from the main harness and plug it into another part of a harness. With the harness I made I didn't have to remove any wires, it was just plug and play!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Plug and Play 4.5 rear Rim?	joes280	2008 - 2012 Ninja 250R Farkles	345	August 1st, 2014 01:21 AM
[motorcyclistonline] - Plug and Play, or Pray? \| Answers	Ninjette Newsbot	Motorcycling News	0	May 27th, 2014 07:30 PM
I need a louder plug and play horn.. Help, pls!	poo poo	2008 - 2012 Ninja 250R Tech Talk	11	September 8th, 2011 05:59 AM
Koso rx-2 plug and play kit F/S	dyeforever	Motorcycle-related	2	May 14th, 2011 02:31 PM
[motorcycledaily.com] - Plug-and-Play	Ninjette Newsbot	Motorcycling News	0	August 7th, 2009 01:20 AM

July 6th, 2012, 05:09 PM	#2
NDspd 1/4 English, 3/4 Kick Ass Name: Jeremy Location: Dayton, OH Join Date: Sep 2011 Motorcycle(s): 2002 Triumph Speed Triple 955i, '05 Suzuki SV650S(retired), '11 Ninja 250R(sold) Posts: A lot.	What parts did you use? What did you do? Pics only go so far.

July 7th, 2012, 07:11 PM	#3
Syphontek ninjette.org newbie Name: Charlie Location: Some where in Canada Join Date: Jun 2012 Motorcycle(s): 2012 Ninja 250r, and a custom built fat tire chopper Posts: 2	It's pretty straight forward, the parts I used are shown in image 1. I ordered some factory type plugs from Japan and I used two diodes. It took me about 3 minutes to hook up the harness I made. If you have seen the no cut diode mod from modmy250 dot com, and I believe the how too is posted on this forum also, you would have noticed that you have to remove a wire from the main harness and plug it into another part of a harness. With the harness I made I didn't have to remove any wires, it was just plug and play!!