Donated Gear, Parts and Equipment - Page 3

Momaru · July 8th, 2011, 12:24 PM

Quote:

Originally Posted by caps

I just purchased a new one last night

but I appreciate the offer, and would have GLADLY taken it off your hands. Their are plenty of other members on the forum who could use one, I am sure someone will give it a new home

and I pm'd Richard a couple days ago and haven't gotten a response yet

Fair enough, sorry I didn't get to ya sooner. The offer is open to anyone who can put that front cowl to use. Same for that right-hand lower fairing.

Jacket has been spoken for by user Shawn. I also have a small Pilot/Yoshimura mesh jacket in blue/black. Picked it up as my first warm-weather jacket a couple o' years ago, but I just don't wear it much anymore. It's still in good condition and holding up well, with the exception of the removable rain liner, which didn't survive long. If you just want a very warm-weather jacket, it'll do ya fine.

Pics of the fairing and jacket available @ request.

Also still have an OEM foam air filter if anyone needs.

03slime250 · July 11th, 2011, 09:58 PM

id love to take amedium helmet, medium or large jacket and a front brake master cylinder off someones hands

CynicalC · July 11th, 2011, 10:20 PM

Gonezo.

FF0000 · July 15th, 2011, 01:54 PM

Quote:

Originally Posted by Oaklandish

I have an extra tool kit someone can have... pre gen

Thanks man. I got it in the mail today. My bike feels more complete now.

alex.s · July 15th, 2011, 01:57 PM

i have an oem headlight reflector if anyone wants it... you'll have to pick it up though.

banhbaoo · July 15th, 2011, 03:37 PM

if anyone has a toolkit for the newgen let me know!

CZroe · July 15th, 2011, 10:49 PM

Quote:

Originally Posted by alex.s

i have an oem headlight reflector if anyone wants it... you'll have to pick it up though.

I'll be PMing you about this shortly. I have to contact my friend in GA first.

alex.s · July 15th, 2011, 11:07 PM

Quote:

Originally Posted by CZroe

I'll be PMing you about this shortly. I have to contact my friend in GA first.

its just the metal reflector taken out of the housing btw

CZroe · July 15th, 2011, 11:37 PM

Quote:

Originally Posted by alex.s

its just the metal reflector taken out of the housing btw

I understand. Thanks. My friend said he messed up something related to it and I'm not sure which so I'm waiting on a reply. I think he messed up the clips for the headlights when he was blindly replacing his. Are these part of the reflector backing?

Alex · August 24th, 2011, 12:58 PM

/thread moved to new "Free Stuff!" subforum

caps · August 24th, 2011, 01:06 PM

Quote:

Originally Posted by Alex

/thread moved to new "Free Stuff!" subforum

NICE!

any thoughts on maybe making it viewable only to members? free is free, but if we can help out a fellow ninjetter that may be better than visitors to the forum.

Alex · August 24th, 2011, 01:15 PM

Quote:

Originally Posted by caps

any thoughts on maybe making it viewable only to members?

Done. Only logged-in members can see the existence of the subforum, and/or any content within that subforum.

want1sobad · August 24th, 2011, 03:46 PM

size medium, about 18 months old. normal wear and tear, but otherwise totally functional/good condition. note - does not come with liner.

here is a full description:

http://www.motorcyclegear.com/street...le_jacket.html

recipient pays shipping - first come, first served.

pm me to arrange reciept.

gone to kevin2109

03slime250 · August 24th, 2011, 04:37 PM

Dibs!

CZroe · August 24th, 2011, 11:06 PM

Greg: did you get your package this time? I haven't heard from the USPS. it was shipped Priority.

Crriiissss · August 25th, 2011, 08:25 AM

Quote:

Originally Posted by Oaklandish

I have an extra tool kit someone can have... pre gen

Quote:

Originally Posted by banhbaoo

if anyone has a toolkit for the newgen let me know!

What's considered pregen/newgen? I bought a used 09 and would like a toolkit

dubojr1 · August 25th, 2011, 08:30 AM

Quote:

Originally Posted by Crriiissss

What's considered pregen/newgen? I bought a used 09 and would like a toolkit

New gen is 2008+ so you have a new gen. Not sure if the kits are the same but they should be very close.

Crriiissss · August 25th, 2011, 09:07 AM

Quote:

Originally Posted by dubojr1

New gen is 2008+ so you have a new gen. Not sure if the kits are the same but they should be very close.

that's what I thought based on body style..but I'd rather get a toolkit that I know would completely work
over a toolkit that someone with a pregen can completely use..unless they are completely identical

reaubideux · August 26th, 2011, 09:01 PM

Jacket is spoken for and has been shipped off to its new owner.

Available for a current rider who NEEDS an armored jacket. If you don't need a jacket, let alone a mesh jacket please don't contact me. Given the generosity gfloyd2002 showed me when he passed this jacket on to me, I want to make sure it goes to someone who truly needs an armored jacket.

It's the same jacket gfloyd2002 was offering up in the 2nd post.

Has minimal wear and tear - gfloyd really took care of the jacket. I've taken good care of it myself.

All I ask is that you pay shipping for it. First come, first served. Once I get your address I'll get a shipping quote from UPS and we'll go from there.

Please PM me if interested as I don't check this thread regularly.

kawiAlli · August 27th, 2011, 10:16 AM

Does anyone have a full face helmet in size small that I could borrow untill mid September?

Kevin2109 · August 27th, 2011, 03:25 PM

Anyone have a mirror? Right or left, doesnt matter. Can be scratched up too. The only requirements is that its not bent and still has the glass. Other then that I could care less. I really want to make a custom mirror. I'll even make a DIY

Anyone have one?

cerberusrex25 · August 27th, 2011, 04:59 PM

Would any mirror do? I have a couple from my pregen I wont be using.

Kevin2109 · August 27th, 2011, 05:11 PM

I dont think so :/ I have to mod the ball joint on the mirror
Posted via Mobile Device

CZroe · August 27th, 2011, 05:58 PM

Quote:

Originally Posted by Kevin2109

I dont think so :/ I have to mod the ball joint on the mirror
Posted via Mobile Device

I do. Someone else may want the mirror mount part. Sound good?

AeroXtasy · August 27th, 2011, 06:14 PM

Almost seem like a beggar asking for stuff. I assure you I'll actually pay you for what you give me when I get the money, I just haven't lately had the money after just buying my bike.

But if anyone has any sort of safety gear, I'd love to borrow it for a while (I'll buy it if I actually want to keep it or give it to someone else when I get my own new gear). I have an old helmet that's black, but anything newer that's more safe would be nice. Any sort of protective jacket and pants would be nice too for obvious reasons.

Lastly, if anyone has a front fairing, I'd love it.
See:

Trailerboy531 · August 28th, 2011, 03:04 PM

Quote:

Originally Posted by Phil7153

Anyone have a stock rear fender (yes that huge mudflappy thing)? I dont have the money to buy a fender eliminator and mine got ripped off somehow.

Sounds like your fender eliminator was done for you!

CZroe · August 28th, 2011, 06:42 PM

Quote:

Originally Posted by Phil7153

Anyone have a stock rear fender (yes that huge mudflappy thing)? I dont have the money to buy a fender eliminator and mine got ripped off somehow.

Yes, I do, but I was hoping to sell it before I moved in the next couple of weeks or make it into a true "no cut" FE. That said, I didn't really give myself enough time for that and I'll take whatever I can get for it as long as you cover shipping. I am using the tiny metal piece that the plate directly mounts to and I was assuming that any buyer would still have that from their original. If yours got ripped off, I'm guessing you don't have it? Part no. 11-53.

Kevin2109 · August 29th, 2011, 09:12 AM

Quote:

Originally Posted by CZroe

I do. Someone else may want the mirror mount part. Sound good?

Sounds awesome!

Sorry ive had my head in my bike the last two days with KC checking valves and installing the gear gauge

CZroe · August 29th, 2011, 10:36 AM

Quote:

Originally Posted by Phil7153

yeah i dont have that little metal piece, sorry. How much would shipping be to 77429?

I'll find out for you and get back. It'd probably be less if I cut it down, but you want the full fender, right?

CZroe · August 29th, 2011, 10:37 AM

Quote:

Originally Posted by Kevin2109

Sounds awesome!

Sorry ive had my head in my bike the last two days with KC checking valves and installing the gear gauge

I'll talk to the other guy and make sure he just wanted the mount. If so, I'll bring it to the tech day for ya (you are going, right?).

Edit: sent this message:

Quote:

The plastic mount with two mounting bolts, one arm bolt, and a lock nut are in flawless condition, but another forum member wants the mirror without the mount. I figured I'd see if you two could split it. Unless you still want the whole thing for $15, I'll send the mount for just the cost of shipping and he can have the mirror when I see him at the next tech day. How's that?

CZroe · September 1st, 2011, 03:55 PM

Quote:

Originally Posted by Phil7153

if you cut it down, thats fine. Ill end up making it into a fender eliminator. That way shipping will be cheaper.

OK, I finally finished packing all my stuff and bringing it to a friend's where I will be for the next week before the cross-country move. I have it in a box that fits the whole fender pretty well but I'll cut it and make a smaller box for shipping.

If your fender got "ripped off," I should ask: What other attached equipment do you need? Tail light? Blinkers?

Also, I think the metal piece with the left and right reflectors can be used without the metal piece the plate normally mounts to. I'll find out. The people who go "all the way" with their cut FE still usually use that little piece under the tail, so we should probably ask if someone ITT has a FE kit and doesn't need that little metal piece.

ManyCavies · September 1st, 2011, 09:56 PM

Quote:

Originally Posted by kawiAlli

Does anyone have a full face helmet in size small that I could borrow untill mid September?

THE SCALA RIDER IS NOT INCLUDED!!

My old helmet will expire in November and you are welcome to it, I have a TINY head, I wear a X-Small. It is a Scorpin EXO 400. If you think it will fit, you are welcome to it. The only thing I ask is that you DESTROY it when December comes around. And I mean take a sledge hammer to it!!! I would never want it to be given to someone and it fail. The visor has some scratches but didn't bother me.

caps · September 2nd, 2011, 09:53 AM

What do you mean "expires"? and you should also require a vid of the sledgehammer action for the rest of us

ManyCavies · September 2nd, 2011, 06:51 PM

There is a sticker inside the helmet usually under the lining with a Month/Year manufacture date. The helmet expires 5 years from that date.

You are right, a vid would be required, Thanks

CZroe · September 2nd, 2011, 09:09 PM

I think she's talking about the common advice that a helmet is only good for 5 years from the date of manufacture even if it's brand new. While there is some truth to foam rott and such, it's not like that is some official expiration at all.

ManyCavies · September 2nd, 2011, 09:37 PM

Right out of the owners manual:

"Even if your helmet has not been damaged, it needs to be replaced every 3 to 5 years depending on how much you use it. Over time, UV rays and adhesive and component aging will damage your helmet. Wearing a damaged helmet may increase your risk of serious injury or death in an accident."

It also states:

"If you buy a new helmet, destroy the old one to ensure it cannot be reused. Do not sell or give your old helmet, even if it has not been damaged. Over time the protective foam in the helmet will adjust to the contours of your head. If someone else uses this helmet it will not provide them as much protection."

leed · September 9th, 2011, 07:41 AM

Quote:

Originally Posted by ManyCavies

THE SCALA RIDER IS NOT INCLUDED!!

My old helmet will expire in November and you are welcome to it, I have a TINY head, I wear a X-Small. It is a Scorpin EXO 400. If you think it will fit, you are welcome to it. The only thing I ask is that you DESTROY it when December comes around. And I mean take a sledge hammer to it!!! I would never want it to be given to someone and it fail. The visor has some scratches but didn't bother me.

[IG]http://www.ninjette.org/forums/picture.php?albumid=125&pictureid=6137[/IMG]

I have found interest in this helmet.. Will shoot you a PM!

itsa250bro · September 10th, 2011, 05:11 PM

Is anyone interested in my new-gen rear fender and light? I used the targa fender eliminator - so you are welcome to all the left over parts. I cut the light off - I probably didn't need to but, I did.

Floyd - this is a great idea, I was wondering what I was going to do with the extra parts - ninjette riders are just too cool...

[EDIT]
Sorry - it's been taken

THE BIG SITT · September 14th, 2011, 03:17 PM

Does anyone have a right fairing from a new gen, preferably a 2008 blue? I laid 'er down and crack my fairing pretty good.

bd14 · September 20th, 2011, 09:45 AM

Need a 2009 left rear fairing! Preferably green! Let me know if you can help me out (:

July 11th, 2011, 10:20 PM	#83
CynicalC ninjette.org certified postwhore Name: Colin Location: Bay Area Join Date: Feb 2011 Motorcycle(s): '96 EX250 Posts: A lot.	Gonezo. Last futzed with by CynicalC; August 27th, 2011 at 11:37 AM.

July 15th, 2011, 01:57 PM	#85
alex.s wat Name: wat Location: tustin/long beach Join Date: Sep 2009 Motorcycle(s): wat Posts: Too much. Blog Entries: 5 MOTM - Oct '12, Feb '14	i have an oem headlight reflector if anyone wants it... you'll have to pick it up though. __________________________________________________

August 24th, 2011, 12:58 PM	#90
Alex ninjette.org dude Name: 1 guess :-) Location: SF Bay Area Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much. Blog Entries: 7	/thread moved to new "Free Stuff!" subforum __________________________________________________ Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered)

August 24th, 2011, 03:46 PM	#93
want1sobad Ninjette CPT Name: Vince Location: jacksonville, fl Join Date: May 2009 Motorcycle(s): Black 08 250r Posts: A lot.	Fieldsheer Mesh Jacket size medium, about 18 months old. normal wear and tear, but otherwise totally functional/good condition. note - does not come with liner. here is a full description: http://www.motorcyclegear.com/street...le_jacket.html recipient pays shipping - first come, first served. pm me to arrange reciept. gone to kevin2109 Last futzed with by want1sobad; August 26th, 2011 at 05:03 PM.

August 26th, 2011, 09:01 PM	#99
reaubideux Perpetual Newb Name: Jason Location: Imperial, MO Join Date: Mar 2011 Motorcycle(s): 2010 MIB Ninja 250R [sold]; 2006 CBR600RR [sold]; 2013 Triumph Street Triple R Posts: 782	Jacket is spoken for and has been shipped off to its new owner. Available for a current rider who *NEEDS* an armored jacket. If you don't need a jacket, let alone a mesh jacket please don't contact me. Given the generosity gfloyd2002 showed me when he passed this jacket on to me, I want to make sure it goes to someone who truly needs an armored jacket. It's the same jacket gfloyd2002 was offering up in the 2nd post. Has minimal wear and tear - gfloyd really took care of the jacket. I've taken good care of it myself. All I ask is that you pay shipping for it. First come, first served. Once I get your address I'll get a shipping quote from UPS and we'll go from there. Please PM me if interested as I don't check this thread regularly. Last futzed with by reaubideux; September 1st, 2011 at 04:32 PM.

July 11th, 2011, 09:58 PM	#82
03slime250 ninjette.org member Name: dakota Location: northwest arkansas Join Date: May 2010 Motorcycle(s): 2003 ninja 250 Posts: 61	id love to take amedium helmet, medium or large jacket and a front brake master cylinder off someones hands

July 15th, 2011, 03:37 PM	#86
banhbaoo ninjette.org member Name: Bao Location: Philadelphia Join Date: May 2011 Motorcycle(s): 08 250r Red Posts: 61	if anyone has a toolkit for the newgen let me know!

August 24th, 2011, 04:37 PM	#94
03slime250 ninjette.org member Name: dakota Location: northwest arkansas Join Date: May 2010 Motorcycle(s): 2003 ninja 250 Posts: 61	Dibs!

August 24th, 2011, 11:06 PM	#95
CZroe CPT Falcon Name: J.Emmett Turner Location: Newnan, GA Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.	Greg: did you get your package this time? I haven't heard from the USPS. it was shipped Priority.

August 27th, 2011, 10:16 AM	#100
kawiAlli ninjette.org member Name: Allicia Location: Clark County Ohio Join Date: Aug 2011 Motorcycle(s): Ninja 250R Posts: 15	Does anyone have a full face helmet in size small that I could borrow untill mid September?

August 27th, 2011, 03:25 PM	#101
Kevin2109 KThanksBye Name: Kevin Location: Orange County Join Date: Mar 2011 Motorcycle(s): 2006 zx636r Posts: A lot.	Anyone have a mirror? Right or left, doesnt matter. Can be scratched up too. The only requirements is that its not bent and still has the glass. Other then that I could care less. I really want to make a custom mirror. I'll even make a DIY Anyone have one? __________________________________________________ ----> My Youtube! <---- Unregistered, watch my youtube page!

August 27th, 2011, 04:59 PM	#102
cerberusrex25 Accesories Guru Name: Dave Location: Centreville, VA Join Date: May 2011 Motorcycle(s): '99 EX250(Cafe/fighter project) Posts: 537	Would any mirror do? I have a couple from my pregen I wont be using.

August 27th, 2011, 05:11 PM	#103
Kevin2109 KThanksBye Name: Kevin Location: Orange County Join Date: Mar 2011 Motorcycle(s): 2006 zx636r Posts: A lot.	I dont think so :/ I have to mod the ball joint on the mirror Posted via Mobile Device

August 27th, 2011, 06:14 PM	#105
AeroXtasy New 2-Wheel Addict Name: Reece Location: Bardstown Join Date: Aug 2011 Motorcycle(s): Blue 2009 250r Kawasaki Ninja Posts: 129	Almost seem like a beggar asking for stuff. I assure you I'll actually pay you for what you give me when I get the money, I just haven't lately had the money after just buying my bike. But if anyone has any sort of safety gear, I'd love to borrow it for a while (I'll buy it if I actually want to keep it or give it to someone else when I get my own new gear). I have an old helmet that's black, but anything newer that's more safe would be nice. Any sort of protective jacket and pants would be nice too for obvious reasons. Lastly, if anyone has a front fairing, I'd love it. See:

September 2nd, 2011, 09:53 AM	#113
caps Sexy Beast Name: Mat Location: Tampa Join Date: Mar 2011 Motorcycle(s): 2010 Ninja 250R, 2006 ZX-14, 2012 Ducati Monster Posts: A lot.	What do you mean "expires"? and you should also require a vid of the sledgehammer action for the rest of us __________________________________________________ 2010 Ninja 250 2006 Ninja ZX-14 ^Both Links

September 2nd, 2011, 06:51 PM	#114
ManyCavies ninjette.org sage Name: Crissy Location: Indio, CA Join Date: Jan 2009 Motorcycle(s): . . . . . . . 2000 Suzuki Intruder VS800 "Suzi", 2008 Kawasaki Ninja EX250 "Yoshi" Posts: 507	There is a sticker inside the helmet usually under the lining with a Month/Year manufacture date. The helmet expires 5 years from that date. You are right, a vid would be required, Thanks __________________________________________________ GO GREEN!! GOT MY PINK ON!!

September 2nd, 2011, 09:09 PM	#115
CZroe CPT Falcon Name: J.Emmett Turner Location: Newnan, GA Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.	I think she's talking about the common advice that a helmet is only good for 5 years from the date of manufacture even if it's brand new. While there is some truth to foam rott and such, it's not like that is some official expiration at all.

September 2nd, 2011, 09:37 PM	#116
ManyCavies ninjette.org sage Name: Crissy Location: Indio, CA Join Date: Jan 2009 Motorcycle(s): . . . . . . . 2000 Suzuki Intruder VS800 "Suzi", 2008 Kawasaki Ninja EX250 "Yoshi" Posts: 507	Right out of the owners manual: "Even if your helmet has not been damaged, it needs to be replaced every 3 to 5 years depending on how much you use it. Over time, UV rays and adhesive and component aging will damage your helmet. Wearing a damaged helmet may increase your risk of serious injury or death in an accident." It also states: "If you buy a new helmet, destroy the old one to ensure it cannot be reused. Do not sell or give your old helmet, even if it has not been damaged. Over time the protective foam in the helmet will adjust to the contours of your head. If someone else uses this helmet it will not provide them as much protection." __________________________________________________ GO GREEN!! GOT MY PINK ON!!

September 14th, 2011, 03:17 PM	#119
THE BIG SITT ninjette.org sage Name: Andy Location: Indianapolis Join Date: Aug 2011 Motorcycle(s): 2008 Kawasaki Ninja 250R Posts: 771	Does anyone have a right fairing from a new gen, preferably a 2008 blue? I laid 'er down and crack my fairing pretty good.

September 20th, 2011, 09:45 AM	#120
bd14 ninjette.org newbie Name: Brandon Location: East Orlando Join Date: Jun 2011 Motorcycle(s): 2009 Ninja 250R Posts: 2	Need a 2009 left rear fairing! Preferably green! Let me know if you can help me out (:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Spare Parts and riding gear	Black Rabbit	Gear-related	7	September 5th, 2012 06:46 AM
Good gear and parts?	dtctjbd	General Motorcycling Discussion	3	May 13th, 2012 02:00 PM
Parts and gear for sale	jeffwessel	Motorcycle-related	12	March 9th, 2010 03:34 AM
[roadracingworld.com] - New Suzuki MotoGP Team Sponsor Builds Gear Drying Equipment	Ninjette Newsbot	Motorcycling News	0	April 14th, 2009 10:00 AM
[superbikeplanet.com] - DMG Now Accepting Parts and Equipment Approval	Ninjette Newsbot	Motorcycling News	0	November 19th, 2008 03:22 PM