DIY Ninja 300 Fender Eliminator Kit and New Rear Blinkers

Surferboy120 · September 30th, 2012, 12:07 PM

Just got done with my fender eliminator kit and it turned out to be a very easy setup. I used the below parts and put a quick video of the finished product up as well.

First got these parts
Adaptor for the license plate $4

Adaptor for the new rear blinkers I got. $20

You will need a new flasher relay - At autozone the FL32 or EL12 works fine. $12
Just an FYI if you follow the DIY link I gave you below it has a three prong relay which requires a ground. The EL12 or FL32 are two prong and plug and play and do notrequire the ground. Hope this helps.

I did get blinkers for $20 as well. You could use the stock blinkers but it wouldn't be as clean or sturdy.

Rear View

Side View

Underneith View

Video

Link to original page on YouTube.
http://www.youtube.com/watch?v=v-PvfDCYQ98&feature=plcp

Here is a great Ninjette Forum DIY on installing lights and shows the relay location and such. Because of this I decided not to do a step by step.
http://www.ninjette.org/forums/showt...ht=DIY+blinker

CZroe · September 30th, 2012, 12:15 PM

Looks clean! I'd like to see an undertail pic with the stock stuff removed before mounting anything back.

Surferboy120 · September 30th, 2012, 12:17 PM

Quote:

Originally Posted by CZroe

Looks clean! I'd like to see an undertail pic with the stock stuff removed before mounting anything back.

Its just 4 screw holes and a square opening into the trunk for the existing wires. Thats it.

Alex · September 30th, 2012, 01:43 PM

/linked from new "300" specific DIY listing at the top of the tech section

ricochet08 · October 1st, 2012, 02:01 PM

very clean indeed and looks great

oh, and i went with the red wheel tape as well! lol

Alex · October 1st, 2012, 02:08 PM

Did you get the new 300 as well? Change your profile!

ricochet08 · October 1st, 2012, 03:20 PM

Quote:

Originally Posted by Alex

Did you get the new 300 as well? Change your profile!

lol, will do. I haven't been on here since i sold my ninjette (miss her so) but i think i'll get along with my 300 just fine

Alex · October 1st, 2012, 03:22 PM

Here's that link: http://www.ninjette.org/forums/profi...do=editprofile

ricochet08 · October 1st, 2012, 04:22 PM

lol! i had a bit of trouble getting there :P thx though!

Alex · October 1st, 2012, 05:32 PM

Go back again. It still says 2010 ninja 250r and 2004 zzr600 under your motorcycles.

(It's another field to edit right on that same profile page)

eddieA6987 · October 3rd, 2012, 08:03 PM

I was thinking red wheel tape as well...or blue.....hmm .
Names eddie by the way. First post. Had a 250 now i got this bug eye baby.

Surferboy120 · October 3rd, 2012, 08:15 PM

Quote:

Originally Posted by eddieA6987

I was thinking red wheel tape as well...or blue.....hmm .
Names eddie by the way. First post. Had a 250 now i got this bug eye baby.

I was going to try white wheel tape but then I saw the red and it really makes it pop in a nice way without being to much in person. I am very happy with my choice.

I am also really happy I went with the white over the SE Green I originally wanted. This is my first white motorcycle and I don't see myself getting tired of it.

CZroe · October 3rd, 2012, 08:19 PM

Quote:

Originally Posted by eddieA6987

I was thinking red wheel tape as well...or blue.....hmm .
Names eddie by the way. First post. Had a 250 now i got this bug eye baby.

Welcome, Eddie.

Still have the two-fifty or was this a trade-up?

Surferboy120 · October 3rd, 2012, 08:22 PM

Of all the white motorcycles I have seen this one below is my favorite. I really like the white wheels on it. I am not sure if the little ninja could pull it off but this bike does and then you can forget about wanting red wheel tape.

eddieA6987 · October 3rd, 2012, 08:29 PM

Quote:

Originally Posted by CZroe

Welcome, Eddie.

Still have the two-fifty or was this a trade-up?

Thanks for the welcome. I actually bought that 250 rebuilt to learn on then sold it about 2 months ago. I was going to buy a new one but i found out about this about a day or two before the new york release and my choice was made. I love it
First brand new bike. I'm scared of getting it stolen though because i live in an apartment complex. Wish it could sleep with me.

Rekognize · October 6th, 2012, 06:13 AM

Quote:

Originally Posted by Surferboy120

You will need a new flasher relay - At autozone the FL32 or EL12 works fine. $12

Underneith View

Hey @Surferboy120

What's the relay for? Couldn't you just splice the 12V LED blinkers directly to the existing turn signal harness?

Got a diagram for it?

Thanks!

psych0hans · October 6th, 2012, 06:23 AM

Don't you think you could have made it a bit more compact? Good job though. Nice DIY.

Edit :- just saw your video, can't wait to see it finished.

Surferboy120 · October 6th, 2012, 07:02 AM

Quote:

Originally Posted by Rekognize

Hey @Surferboy120

What's the relay for? Couldn't you just splice the 12V LED blinkers directly to the existing turn signal harness?

Got a diagram for it?

Thanks!

You do splice the new blinkers directly into the existing turn signal harness. You are changing the relay because the existing relay needs so much power to activate. The new blinkers take less power to operate which prevents the relay from functioning properly.

This DIY does a great job of showing the install process which I will add to my thread and why I didnt go to deep into my install.
http://www.ninjette.org/forums/showt...ht=DIY+blinker

Surferboy120 · October 6th, 2012, 07:08 AM

Quote:

Originally Posted by psych0hans

Don't you think you could have made it a bit more compact? Good job though. Nice DIY.

Edit :- just saw your video, can't wait to see it finished.

Yes I could have but I wanted the lights to be wider than most people go. The reason for me is that when i am driving and see a motorcycle with flush mounted lights its actually harder for me to see quickly which way they are signaling. Just a personal thing but with that mindset I wanted to make sure I wasn't hard to see for others. Once my new Texas plate arrives I will also be able to get rid of the license plate mount which will be nice.

Rekognize · October 6th, 2012, 07:18 AM

Quote:

Originally Posted by Surferboy120

You do splice the new blinkers directly into the existing turn signal harness. You are changing the relay because the existing relay needs so much power to activate. The new blinkers take less power to operate which prevents the relay from functioning properly.

Gotcha, thanks!

psych0hans · October 8th, 2012, 08:47 AM

Quote:

Originally Posted by Surferboy120

Once my new Texas plate arrives I will also be able to get rid of the license plate mount which will be nice.

I was actually only talking about the mount, the lights look good where they are

psych0hans · October 8th, 2012, 08:48 AM

Quote:

Originally Posted by Surferboy120

Of all the white motorcycles I have seen this one below is my favorite. I really like the white wheels on it. I am not sure if the little ninja could pull it off but this bike does and then you can forget about wanting red wheel tape.

That's an R1... It'll look sexy even if it had NO paint...

just sayin...

Sapper · October 8th, 2012, 01:44 PM

Quote:

Originally Posted by Surferboy120

Of all the white motorcycles I have seen this one below is my favorite. I really like the white wheels on it. I am not sure if the little ninja could pull it off but this bike does and then you can forget about wanting red wheel tape.

I hate wheel tape on every bike I have ever seen.

I also hate R1s.

And midgets.

Surferboy120 · October 8th, 2012, 02:40 PM

Quote:

Originally Posted by Sapper

I hate wheel tape on every bike I have ever seen.

I also hate R1s.

And midgets.

Why so angry? LOL

Kstorm21 · October 18th, 2012, 08:55 PM

Why does your temp plate say 2012 Kawasaki?

tuan3742 · October 19th, 2012, 07:43 PM

Great, now that i've seen this, i feel like the stock fender looks boring lol

Rekognize · November 6th, 2012, 06:25 PM

Targa bracket with ebay led blinkers and plate lights:

September 30th, 2012, 12:07 PM	#1
Surferboy120 Finding some curves.... Name: Thomas Location: Hurst,Texas Join Date: Sep 2012 Motorcycle(s): 2013 300 Ninja Posts: 268	DIY Ninja 300 Fender Eliminator Kit and New Rear Blinkers Just got done with my fender eliminator kit and it turned out to be a very easy setup. I used the below parts and put a quick video of the finished product up as well. First got these parts Adaptor for the license plate $4 Adaptor for the new rear blinkers I got. $20 You will need a new flasher relay - At autozone the FL32 or EL12 works fine. $12 Just an FYI if you follow the DIY link I gave you below it has a three prong relay which requires a ground. The EL12 or FL32 are two prong and plug and play and do notrequire the ground. Hope this helps. I did get blinkers for $20 as well. You could use the stock blinkers but it wouldn't be as clean or sturdy. Rear View Side View Underneith View Video Link to original page on YouTube. http://www.youtube.com/watch?v=v-PvfDCYQ98&feature=plcp Here is a great Ninjette Forum DIY on installing lights and shows the relay location and such. Because of this I decided not to do a step by step. http://www.ninjette.org/forums/showt...ht=DIY+blinker Last futzed with by Surferboy120; October 6th, 2012 at 07:15 AM. Reason: added comments

September 30th, 2012, 01:43 PM	#4
Alex ninjette.org dude Name: 1 guess :-) Location: SF Bay Area Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much. Blog Entries: 7	/linked from new "300" specific DIY listing at the top of the tech section __________________________________________________ Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered)

October 1st, 2012, 02:08 PM	#6
Alex ninjette.org dude Name: 1 guess :-) Location: SF Bay Area Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much. Blog Entries: 7	Did you get the new 300 as well? Change your profile! __________________________________________________ Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered)

October 1st, 2012, 03:22 PM	#8
Alex ninjette.org dude Name: 1 guess :-) Location: SF Bay Area Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much. Blog Entries: 7	Here's that link: http://www.ninjette.org/forums/profi...do=editprofile __________________________________________________ Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered)

October 1st, 2012, 05:32 PM	#10
Alex ninjette.org dude Name: 1 guess :-) Location: SF Bay Area Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much. Blog Entries: 7	Go back again. It still says 2010 ninja 250r and 2004 zzr600 under your motorcycles. (It's another field to edit right on that same profile page) __________________________________________________ Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered)

September 30th, 2012, 12:15 PM	#2
CZroe CPT Falcon Name: J.Emmett Turner Location: Newnan, GA Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.	Looks clean! I'd like to see an undertail pic with the stock stuff removed before mounting anything back.

October 1st, 2012, 02:01 PM	#5
ricochet08 ninjette.org guru Name: Ross Location: St. Louis Join Date: Aug 2010 Motorcycle(s): 2007 ninja ex500, 2010 Ninja 250r, 2004 zzr600, 2003 CBR600rr, 2013 Ninja 300...in that order :D Posts: 266	very clean indeed and looks great oh, and i went with the red wheel tape as well! lol

October 1st, 2012, 04:22 PM	#9
ricochet08 ninjette.org guru Name: Ross Location: St. Louis Join Date: Aug 2010 Motorcycle(s): 2007 ninja ex500, 2010 Ninja 250r, 2004 zzr600, 2003 CBR600rr, 2013 Ninja 300...in that order :D Posts: 266	lol! i had a bit of trouble getting there :P thx though!

October 3rd, 2012, 08:03 PM	#11
eddieA6987 ninjette.org member Name: Eddie Location: West Palm Beach Join Date: Jan 2012 Motorcycle(s): 300 white/black Posts: 28	I was thinking red wheel tape as well...or blue.....hmm . Names eddie by the way. First post. Had a 250 now i got this bug eye baby.

October 3rd, 2012, 08:22 PM	#14
Surferboy120 Finding some curves.... Name: Thomas Location: Hurst,Texas Join Date: Sep 2012 Motorcycle(s): 2013 300 Ninja Posts: 268	Of all the white motorcycles I have seen this one below is my favorite. I really like the white wheels on it. I am not sure if the little ninja could pull it off but this bike does and then you can forget about wanting red wheel tape.

October 6th, 2012, 06:23 AM	#17
psych0hans ninjette.org certified postwhore Name: Hansveer Location: Bombay, India Join Date: Jan 2012 Motorcycle(s): Ninja 250r - Track whore, Ninja 300 - SOLD, KTM RC390 - Orange Hulk, Ducati 899 Panigale - Red Devil. Posts: A lot.	Don't you think you could have made it a bit more compact? Good job though. Nice DIY. Edit :- just saw your video, can't wait to see it finished. __________________________________________________ GETTING BACK INTO RIDING? Read this.

October 18th, 2012, 08:55 PM	#25
Kstorm21 ninjette.org sage Name: Katherine Location: Schofield Barracks, HI Join Date: Dec 2011 Motorcycle(s): 2009 Ninja 250R SE Posts: 767	Why does your temp plate say 2012 Kawasaki? __________________________________________________

October 19th, 2012, 07:43 PM	#26
tuan3742 ninjette.org member Name: Eric Location: Portland Join Date: Oct 2012 Motorcycle(s): 13' zx-6r 636 Posts: 155	Great, now that i've seen this, i feel like the stock fender looks boring lol __________________________________________________ Yes, I'm a squid. But it's okay, I love squid, so can you

November 6th, 2012, 06:25 PM	#27
Rekognize ninjette.org member Name: J Location: Toronto Join Date: Sep 2012 Motorcycle(s): Ninja 300 Posts: 103	Targa bracket with ebay led blinkers and plate lights: __________________________________________________ My Ninja 300 Build Photoblog Greater Toronto Area 250/300 Riding Group

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ninja 300 SS Fender eliminator kit for sale	anacron	Motorcycle-related	0	May 31st, 2014 09:13 PM