Kawasaki Ninja 250R 2009 - Targa No cut Rear Fender Eliminator Vid

nat1ve · December 1st, 2010, 11:57 AM

Not a Install vid sry, More like a Before and After Video, The Kit Cleans up the Rear so much, very much worth it...

CZroe · December 3rd, 2010, 03:09 PM

Why'd you buy a 50-state bike in AZ?

oroboros · December 3rd, 2010, 04:17 PM

I really dig the Rush re-mix... where did that come from?

I wish the lighting was a little better on the vid.

I am planning on doing a DIY FE and just cutting the ugly stock fender off. I have looked at FE kits now for weeks. All the time I have spent looking and debating I could have just done the work by cutting off the stock fender. Now that the weather looks like it will be just to damn cold it's time to do it.

I know that there are several folks out there who have already shown the process and the results the of their DIY but I might as well add to the noise.

Any one want to go riding?

December 1st, 2010, 11:57 AM	#1
nat1ve ninjette.org member Name: Mark Location: Arizona Join Date: Nov 2010 Motorcycle(s): Red Ninja 250r 09 Posts: 13	Kawasaki Ninja 250R 2009 - Targa No cut Rear Fender Eliminator Vid Not a Install vid sry, More like a Before and After Video, The Kit Cleans up the Rear so much, very much worth it... Link to original page on YouTube. __________________________________________________ DJ naT1ve - www.facebook.com/djnat1ve - Feel free to add me Fellow Ninja Riders

December 3rd, 2010, 04:17 PM	#3
oroboros GDTRFB Name: Drew Location: SE PA Join Date: Nov 2010 Motorcycle(s): 2009 Ninja 250 - sold 2005 EX500R project Posts: 496	Targa FE I really dig the Rush re-mix... where did that come from? I wish the lighting was a little better on the vid. I am planning on doing a DIY FE and just cutting the ugly stock fender off. I have looked at FE kits now for weeks. All the time I have spent looking and debating I could have just done the work by cutting off the stock fender. Now that the weather looks like it will be just to damn cold it's time to do it. I know that there are several folks out there who have already shown the process and the results the of their DIY but I might as well add to the noise. Any one want to go riding?

December 3rd, 2010, 03:09 PM	#2
CZroe CPT Falcon Name: J.Emmett Turner Location: Newnan, GA Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.	Why'd you buy a 50-state bike in AZ?