June 15th, 2009, 06:29 PM | #1 |
ninjette.org certified postwhore
Name: Bob
Location: CA
Join Date: Dec 2008 Motorcycle(s): '08 Ninja 250r, '14 CBR500r Posts: A lot.
|
Oil & Temp light staying on longer at start-up
As the title states, over the last week or two it has taken longer and longer for the Oil & Temp lights to turn off at start-up (cold). For the past 9K miles it would always go off by 2 sec. max (estimate). But today it was more like 5 long sec. Thinking it might help, when it wasn't turning off, I tilted the bike more upright, and it instantly turned off.... I don't know if this was a coincidence or not. I am waiting for the oil to settle to double-check my oil level, but I suspect it is fine.
Anyone have a problem like this? |
|
June 15th, 2009, 06:38 PM | #2 |
ninjette.org member
Name: Chris
Location: Tobyhanna, PA
Join Date: Jan 2009 Motorcycle(s): 2008 Ninja 250r Posts: 51
|
i have the same prob.... to fix all i do is tilt the bike so its level as if going to check the oil level then start it up. the light shuts off after 2 seconds or so.. i think the cause is all the oil is going to the one side and its not enough for the oil pump to push through the system???
|
|
June 15th, 2009, 06:45 PM | #3 |
ninjette.org certified postwhore
Name: Bob
Location: CA
Join Date: Dec 2008 Motorcycle(s): '08 Ninja 250r, '14 CBR500r Posts: A lot.
|
I don't understand why it changed all of a sudden. I sure hope nothing is about to break.
I have always used the Motul 3000 until this current oil, which is Valvoline 4-stroke (it was cheap). I just picked up the Shell Rot. and will likely stick with it now that I found it locally. |
|
June 17th, 2009, 02:09 PM | #4 |
ninjette.org certified postwhore
Name: Bob
Location: CA
Join Date: Dec 2008 Motorcycle(s): '08 Ninja 250r, '14 CBR500r Posts: A lot.
|
It seems an oil change solved this problem.
It looked like I may have had more oil than I usually put in.... close to max line, but I don't think over it. I was fearful at first that something big may have broke and the coolant many have mixed in, but luckily I was just being paranoid. |
|
June 18th, 2009, 10:45 PM | #5 |
ninjette.org member
Name: Sky
Location: Sacramento
Join Date: Mar 2009 Motorcycle(s): 250R 08 Posts: 63
|
Cool thanks, I was having this problem too where it would stay on a bit longer than usual.
|
|
June 19th, 2009, 01:24 AM | #6 |
ninjette.org certified postwhore
Name: Bob
Location: CA
Join Date: Dec 2008 Motorcycle(s): '08 Ninja 250r, '14 CBR500r Posts: A lot.
|
I wish I knew why.... the old oil was actually pretty new. Let us know if a change helps you too.
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Oil Pressure Light Staying on at Start Up | spacemonkey | 2008 - 2012 Ninja 250R Tech Talk | 50 | October 26th, 2016 10:05 AM |
Koso Oil Temp Sensor Adapter & Water Temp Sensor Adapter | StaylorT | 2008 - 2012 Ninja 250R Tech Talk | 10 | January 24th, 2014 12:38 AM |
oil temp vs coolant temp | cuong-nutz | General Motorcycling Discussion | 11 | January 23rd, 2013 05:44 PM |
My temp and oil light came on?? | Kevin2109 | 2008 - 2012 Ninja 250R Tech Talk | 11 | July 17th, 2011 01:07 AM |
Oil and Temp light on after low side | dznuts | 2008 - 2012 Ninja 250R Tech Talk | 2 | May 2nd, 2011 05:57 AM |
|
|