Rear flush mounts

02337 · January 10th, 2013, 12:28 AM

So I have these flush mounts in the front and I'm looking to get rid of them in the extra brake light pods as I'm painting the bike black and would feel safer having the turns somewhere else besides the pods.

So I'm thinking if ordering a set of flush mounts and mount them on the rear fairing section below the seat right under the little wing.

I already have a fender delete mod. So any opinions as far as have you seen this done? Think flush mounts would look weird attached to the rear fairing?

Link
http://item.mobileweb.ebay.com/viewi...id=48684863472

EsrTek · January 10th, 2013, 05:59 AM

If stock taillight..for a few $$ you can just add the turn signals into the extra spots on either side of brake light.

rojoracing53 · January 10th, 2013, 06:12 AM

Those cheapo flush mounts normally aren't bright at all. My budy had something very similar and I could never see them during the day.

02337 · January 10th, 2013, 08:26 AM

The flush mounts I have in my front are obnoxiously bright, and I have the turns in the pods but I'd really like it brighter and more visible than what they provide

January 10th, 2013, 12:28 AM	#1
02337 ninjette.org member Name: George Location: Delaware Join Date: Aug 2012 Motorcycle(s): 03 ninja 250 Posts: 201	Rear flush mounts So I have these flush mounts in the front and I'm looking to get rid of them in the extra brake light pods as I'm painting the bike black and would feel safer having the turns somewhere else besides the pods. So I'm thinking if ordering a set of flush mounts and mount them on the rear fairing section below the seat right under the little wing. I already have a fender delete mod. So any opinions as far as have you seen this done? Think flush mounts would look weird attached to the rear fairing? Link http://item.mobileweb.ebay.com/viewi...id=48684863472

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Flush Mounts?!	scubaru	1986 - 2007 Ninja 250R Farkles	62	January 1st, 2014 02:39 PM
Flush Mounts	fredhsu	2008 - 2012 Ninja 250R Farkles	16	August 27th, 2012 10:55 AM
Turn signals...not working at all (Flush mounts/Hotbodies rear	BlackNinja	2008 - 2012 Ninja 250R Tech Talk	3	July 24th, 2011 03:42 PM
Proton Flush Mounts	Jerkson	Motorcycle-related	6	September 23rd, 2010 05:23 PM
Flush Mounts for 500	reondadomino	General Motorcycling Discussion	9	December 19th, 2009 03:01 PM

January 10th, 2013, 05:59 AM	#2
EsrTek ninjette.org certified postwhore Name: Eric Location: Murfreesboro, TN Join Date: Jun 2011 Motorcycle(s): '13 300 Posts: A lot.	If stock taillight..for a few $$ you can just add the turn signals into the extra spots on either side of brake light.

January 10th, 2013, 06:12 AM	#3
rojoracing53 Fast-Guy wannabe Name: Jason Location: Brentwood, Ca Join Date: Oct 2011 Motorcycle(s): 2009 Ninja250, 2011 RM-Z250, 2004 NSR50, Posts: A lot. MOTM - Jan '13	Those cheapo flush mounts normally aren't bright at all. My budy had something very similar and I could never see them during the day.

January 10th, 2013, 08:26 AM	#4
02337 ninjette.org member Name: George Location: Delaware Join Date: Aug 2012 Motorcycle(s): 03 ninja 250 Posts: 201	The flush mounts I have in my front are obnoxiously bright, and I have the turns in the pods but I'd really like it brighter and more visible than what they provide