Adding 2nd Set of Rear Turn Signals - Any Issues?

NathanF · September 17th, 2011, 08:17 PM

I'm going to be adding a 2nd set of turn signals to my hard bags, since the bags obscure the stock ones and I'm not interested in moving them.

Should there be any issues with this? (IE, do I need a diode, or can I just buy two LED signals and attach them right in at the back.)

Also, can anyone recommend any cheap flush mount LED signals that are as bright as the stock ones?

gt_turbo · September 18th, 2011, 07:02 AM

read the LED wiki post, under the ninjette wiki section on the main page.

CThunder-blue · September 19th, 2011, 08:25 AM

If you're going to add LED's to stock signals, you don't need any new relays or diodes. Can't really recommend any flushmounts since I don't know what you're looking for. I would suggest getting some LED strips off ebay. You can run down a couple of strips on each side of your hard bags.

NathanF · September 21st, 2011, 01:13 AM

Quote:

Originally Posted by CThunder-blue

If you're going to add LED's to stock signals, you don't need any new relays or diodes. Can't really recommend any flushmounts since I don't know what you're looking for. I would suggest getting some LED strips off ebay. You can run down a couple of strips on each side of your hard bags.

Thanks for the info - that's just what I wanted to know.

I too don't know what I'm looking for yet...but as usual, I'll post when I find it.

September 17th, 2011, 08:17 PM	#1
NathanF ninjette.org member Name: Nathan Location: Portland, Oregon Join Date: Apr 2011 Motorcycle(s): 2009 V-Strom 650 ABS Posts: 166	Adding 2nd Set of Rear Turn Signals - Any Issues? I'm going to be adding a 2nd set of turn signals to my hard bags, since the bags obscure the stock ones and I'm not interested in moving them. Should there be any issues with this? (IE, do I need a diode, or can I just buy two LED signals and attach them right in at the back.) Also, can anyone recommend any cheap flush mount LED signals that are as bright as the stock ones?

September 19th, 2011, 08:25 AM	#3
CThunder-blue ModMy250.com Name: Tri Location: St, Louis Join Date: Sep 2010 Motorcycle(s): 2009 Ninja 250R, 2005 R6 Posts: A lot.	If you're going to add LED's to stock signals, you don't need any new relays or diodes. Can't really recommend any flushmounts since I don't know what you're looking for. I would suggest getting some LED strips off ebay. You can run down a couple of strips on each side of your hard bags. __________________________________________________ The www.ModMy250.com guy

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Looking for 09 oem rear turn signal and front turn signals and tail fairings	mbbernas	Items Wanted	1	September 11th, 2013 10:48 AM
WTB:09 250r right rear set assembly, flush turn signals, tail light mount bracket	mbbernas	Items Wanted	5	August 15th, 2013 03:54 PM
WTB for 08 250R: rear set / gear shifter, bar ends, levers, turn signals	Skyfox16	Items Wanted	3	March 13th, 2013 08:54 AM
Adding a 2nd Ninjette to the stable	Zipster	General Motorcycling Discussion	10	November 5th, 2012 10:20 AM
Rear turn signals don't blink, front turn signals don't turn on	andyuc88	2008 - 2012 Ninja 250R Tech Talk	3	March 23rd, 2012 02:47 PM

September 18th, 2011, 07:02 AM	#2
gt_turbo ninjette.org sage Name: L Location: WI Join Date: Apr 2011 Motorcycle(s): '09 250R, '13 CBR500R Posts: 709	read the LED wiki post, under the ninjette wiki section on the main page.