List Your Mods!!!

[Tims250R]

Mods to my 09-250..

1. Powder Coated Parts..
2. Brake Calipers+
3. Brake Rotors+
4. Rear Sprocket+
5. wheels+
6. Passenger pegs+
7. Blue Truefire Airbrush paint...+
8. Aftermarket aluminum rider Pegs+
9. Comp werks Fender Eliminator+
10. Blue Solo Seat Cowl+
11. "Bikemonkey.com" Intergrated Tail light.. Lightly Tinted+
12. Soupys Performance Front & rear Lowering kit.. +
13. Xentec 8000k Hid headlight Kit+
14. Couple Blue Led Light Pods+
15. Billet Aluminum Custom Coated Hand Grips+
16. DIY Front flushmount Turnsignals+
17. Puig Dark smoke windscreen+
18. 2007 Gsxr Muffler +
19. Ceramic Coated entire Exhaust+
20. DIY Modded Swingarm/widened+
21. 05-636 rear wheel+
22. 180/55/17 rear Tire+
23. swingarm spools+
24. shimmed carb Needles++
25. Pro-grip Clear Tank Pad+

[cifex]

1. Comagination headlight modulator
2. Comagination brake light flasher
3. RAM iPhone 3G handlebar mount
4. Ventura Pack Rack
5. Integrated USB power ports for the iPhone (In the works)

[DarkNinja52]

1. gas +
2. scratches from fall -

I think that's those are the only things that have changed since I got the bike last month

[zev42]

Things I already have:

1. Woodcraft clip-on handle bars
2. Rearset adjusters
3. Woodcraft shifter (I bent the stock shifter from a drop)
4. K&N Filters
5. Red rim tape
6. Puig double bubble windscreen (i didn't like it after a few months, so I took it off.... it's for sale if anyone is interested )

Things to get:

1. Pazzo shorty levers
2. Fender Eliminator
3. No cut frame sliders
4. A new paint job! I want my bike to look more aggressive
5. Bridgestone tires (currently have Dunlop, but I was told Bridgestone is better for track)

[ScorpionNinja]

1. DIY: Rear Fender Chop +
2. DIY: Red Rim stripes + (non-reflective)
3. Progrip Tank Protector + (Carbonfiber color)
4. Stompgrip (universal kit) +
5. Skull w/crossbones, Chrome / Red eyes, Valve Tire Caps +
6. Rear Seat Cowl + (OEM - Sunbeam Red)
7. Windscreen/Fairing Spikes + (35mm long, Black)
8. Pit Bull Swingarm Delrin Spools + (10mm, Black)
9. DIY: SW-Motech Mirror Extenders +

More to come as i wait for Shipping!

[smcbride11]

1. DIY Rear Fender Chop +
2. Woodcraft Rearsets (with stock shifter and brake pedal) +
3. ZG Double Bubble Windscreen +
4. Blue reflective rim stripes + (I've give them two or three plusses if they were Candy Thunder)
5. Pit Bull Spools

On order, I've got the Cycle Control shorty levers. Should see them within a week.

[Jerry]

1. 15 tooth sprocket +
2. FIAMM Freway Blaster +
3. One Sticker +
4. Some scrapes on the right side -

[randomwalk101]

1. Dark smoke Puig windscreen
2. Spin-On Oil filter adapter
3. MobileOne M-110 spin-on oil filter
4. Factory Pro Jet kit
5. BMC pods air filter
6. K&N breather filter
7. Galfer SS lines
8. HID 6000K H7 kit
9. Aftermarket pegs
10. Rim tape
11. Rear LED signal lights
12. Front Rizoma LED signals
13. Flasher Relay
14. SS heavy bar ends
15. Renthal grip
16. Pazzo Racing adjustable clutch lever & ex500 clutch perch
17. Progrip tank protector
18. Alarm
19. Factory solo cowl
20. Rear brake light warning module
21. Rear LED brake light
22. ShoGun frame slider
23. JCWhitney's Large hardcase trunk box
24. Extra stock rear seat (to mount trunk box)
25. 15 tooth front sprocket
26. 42tooth rear sprocket
27. Scott's CF rear tire hugger
28. Yoshimura CF slip-on
29. Vista Cruise control
30. Dynamic racing LED lighted license plate
31. Cox radiator guard
32. Fiamm Freeway Blaster horn
33. Custom Corbin seat
34. Swing arm spools
35. Fender chop
36. BikerMonkey LED smoked taillight
37. Scott's steering damper
38. Daytona temp gauge
39. SW mirror extender
40. inline fuel filter
41. Custom passenger pegs LEDs brake light
42. Battery tender wired

[Hokie11]

2009 Diablo Black 2fiddy +++++++++

1. Puig DoubleBubble Dark Smoke Windscreen +
2. Red "Kawasaki" Vinyl on windscreen +
3. Red/Black Gel Progrip 725s +
4. Reflective Red Rimtape +
5. CF Progrip Tank Pad - (too small but soon replaced)
6. Shogun Frame Sliders ++++++
7. Shogun Bar End Sliders ++
8. Shogun Swingarm Spools/Sliders ++
9. Proton Flushmount LEDs ++++
10. Shimmed Needles (2) +++++
11. Zip-tie Throttle Tube Mod +++
12. Woodcraft Rearsets with Pedals ++++
13. 10000K HIDs ++++++
14. De-snorkeled +++
15. K&N Air Filter ++
16. 15T Front Sprocket ++++

[nate-bama]

2006 ex 250 f

1. pirelli mt-75's - ++
2. EBC bakes - +
3. K = N pods - + +
4. Factory pro kit - ++
5. Zero Gravity double bubble - +
6. JT sprockets 15 tooth front - ++
7. $ 0.00 fender chop - +
8. Decals removed - +
   5w40 rotella synthetic - +

more to follow!

[bob706]

1. ZG DB
2. No Cut brake modulator
3. 12v outlet (weatherproof)
4. chrome rim tape
5. swing arm spools
6. vista throttle lock (this will save your right hand)
7. Garmin Zumo 550 & ram mount

[sofo]

Done:

1. Shogun swingarm spools
2. Pazzo Racing adjustable brake / clutch levers (black with green knobs)

To-do:

1. Shogun frame / bar-end sliders (just need a scissor jack and some gumption)
2. Competition werks fender eliminator kit (for easier paddock stand use really)

Maybe:

1. Solo seat cowl
2. Remove passenger pegs and use Zartan's exhaust hanger

[cochraneap]

on my red 2008 250R

1. BikeLiteZ SS undertail fender eliminator
2. Bike Monkey integrated LED taillight
3. Zero Gravity DB dark smoke windscreen
4. Progrip tank pad
5. Progrip rim tape

still want to get Proton flush mount front turn signals and maybe a 4300K HID headlight conversion.

also want to paint the lower portion of the side fairings black and add a long white Kawasaki decal along the bottom. and powdercoat the muffler black.

[zail]

1. R & G Tail Tidy
2. Skidmarx Hugger
3. Seat Cowl
4. Scorpion Exhaust
5. R & G Exhaust Hanger
6. Rear Footpegs removed
7. Cycle Control Footpeg Adjusters
8. Cycle Control Adjustable levers - black with purple adjusters
9. Skidmarx Double Bubble
10. Rear Decals removed
11. R & G Crash Bobbins
12. SW Motech Mirror Extenders

Also got Skidmarx headlight protector to fit at some point... Thinking about the Buell pegs mod...

[rockNroll]

Originally Posted by zail

Also got Skidmarx headlight protector to fit at some point... Thinking about the Buell pegs mod...

You have the adjusters so your feet are higher/farther back... I'd suggest non-folding foot pegs.

1. non-reflective rim stripes (pin stripe from pep-boys)
2. woodcraft rear sets
3. woodcraft clip ons
4. shimmed and drilled
5. BT- 003rs - currently
6. snorkel missing
7. hacked kick stand mount

[Ken]

1. Woodcraft clip-ons (with stock bar-ends) +
2. CycleControl rearset adjuststers +
3. solo seat cowl +
4. Puig dark smoke double bubble screen (seasonal- it's on) +
5. bikemonkey LED integrated taillight +
6. customdynamics dual LED bar license plate frame +
7. no-cut brake light modulator +
8. Intuitive no-cut frame sliders (removed)
9. Intuitive spools
10. Pro Grip clear tank protector +
11. eBay/Scott's matte black rear tire hugger
12. several blindspot mirrors +
13. SW-Motech mirror extenders +
14. FIAMM freeway blaster horn +
15. Bridgestone BT-016 110/70 F 150/60 R tires +
16. BELL 12V Outdoor power outlet +
17. two RAM 1" ball mounts +
18. Pazzo long clutch lever +
    
    Sitting in my room: Spiegler front and rear stainless steel brake lines and EBC front pads

[pedaltothemetal]

1. DIY fender elimator
2. Shogun spools
3. Battery tender cable
4. Tomtom GPS
5. HIDs
6. Corbin Seat
7. Tank protector

[min nin]

1. 15,43 sprockets.
2. DIY front fender mod.
3. Painted cargo hooks.
4. New tank, free from kawasaki.
5. Spot mirrors.
6. Mod shifter clearance to help leg pain,I'm too big for this bike.
7. New carb screws.
8. New fairing screws.

Soon

1. Mikes euro windshield. Still waiting for USPS.
2. Needle shim, maybe depends on how bad the mpg suffers.

[talldrink]

1. DIY fender chop
2. Rim stripes
3. Battery tender wired
4. No-cut brake modulator
5. Vortex spools
6. Kawasaki stickers on lower fairing (only one side done thus far)

To do:

1. Seat cowl
2. Pazzo levers
3. Tank pad

[mike_sema]

1. fender chop
2. rim tape
3. pro grips
4. pro grips tank pad
5. heavy bar ends
6. custom seat
7. custom seat cover
8. solo seat cawl
9. custom rear seat
10. custom ninja 250r decals
11. tank overlays
12. rear spools
13. zero g db screen
14. dyno jet stg2 kit
15. K&N filter
16. desnorkled
17. kleen air rmvd
18. 15t front sprocket
19. sportisi full exhaust
20. exhaust wrap
21. custom exhaust hanger
22. blue gage lights

things i have not instaled yet

1. frame sliders

things i will have soon

1. rear sets
2. shift indi
3. hugger
4. levers
5. full set of race plastics

and everthing is a +++++

[ztrack157]

^forgot clipons

[ztrack157]

2008 Ninja 250 I won't rate my own product to avoid Bias.

1. Hel Brake lines +
2. KN 0990 +
3. My Jet Kit
4. Cycle control levers -
5. X race rear sets
6. BRT TIS fully programmable
7. Sportisi Hugger
8. Sportisi DB windscreen
9. D2s Hid kit +/- Needs adjustment but like it
10. E55 BMW projector +/- needs adjustment but like it
11. Retrofit source gatlin gun shroud +
12. Cyberdne gauge + needs dimmer switch installed
13. glow shift pod +
14. Daytona brake pads +
15. progrip grips +
16. VR exhaust
17. Powder coated rims by tim +
18. bt 016 tires +
19. flush mount turn signals from R1 and GSXR600
20. Sportisi exhaust hanger
21. Sportisi Cyclone kit with custom paint
22. race tech front springs +
23. Knight Rider tail light +
24. zx 10 license plate bracket and light +++++++++

Theres more but I'm tired and can't think straight.

I have an RPm shock, clipons, steering damper, ISR front rotor, and brembo caliper set up waiting for me. Atech mirrors on order.

[tapdiggy]

1.) Directionals in pods.

2.) Cut and shaped chainguard (a bit moot with the stock dual exhaust, but I know its there).

3.) Cycle Control rearset adjusters.

4.) Harri's Shark Grips.

5.) Continental TKV 11 front tire; TKV 12 rear tire.

6.) Cut-down rear fender.

Plus a Full Post-Crash Tear Up:

A) Broken upper fairing removed.

B) Headlight removed; replaced with fog lights from Wal-Mart.

C) Flush mount LED directionals installed; mounting position not flush with anything.

D) Speedometer assembly removed and replaced with bicycle computer; less awful and redneck than it sounds, I assure you.

E) $5 mirror off a brand new Vulcan, chrome finish *bling-bling*

[anthony26]

1. Targa Fender Eliminator
2. Targa Half Tank Protector
3. Bar End Sliders
4. Swing Arm Sliders
5. Fairing Sliders
6. Red Spray Painted Windscreen
7. Ninja Decals removed

If i decide to keep my bike when spring comes I am adding slipon exhaust, jetting, doublebubble windscreen.

[silver_bullet]

1. Intuitive frame sliders
2. Custom Fender eliminator
3. LED screw plate lights
4. Progrip tank pad
5. (HAD) CF Two-Brothers slip on
6. 15T front sprocket (currently in the mail from Dennis Kirk)

Need

1. Reflective rim tape
2. scratchon graphic kit
3. possibly HID

[want1sobad]

all my mods are diy's i got from this forum - thanks to all!

1. fender chop
2. rear pegs as front pegs
3. painted stock screen
4. stock signals to flushmount
5. painted exhaust
6. rimtape

[FrugalNinja250]

The only mods I've done on my '06 Ninja 250 are converting the bike's lighting over to LED, including fitting the outer pods with extra bulbs, and installing a Mike's EuroShield. All I've got left to convert to LEDs are the turn signals and the cluster back-lighting. Just bought the electronic flasher unit today at lunch to finish the turn signals.

[Yoda]

1. Hotbodies Undertail with LED turn signals -- but took lots of
2. Tweaking around stock suspension and control settings.

[miks]

1. Yoshi CF slip-on
2. DIY painted windscreen
3. DIY fender eliminator
4. DIY painted exhaust heat shield
5. Seal Cowl
6. Progrip tankpad

Might be getting HIDs soon, tinting my headlight and some reflective white rim tape.

[CC Cowboy]

The best mod that can be done is (drumroll please); mod the rider and spend the money on a track school and learn how to ride.

[Racer x]

Originally Posted by Racer x

1. Airtech streamline body
2. Bubble shield Puig
3. Full Yoshi for the street Nojima GP exhaust for race
4. K&N air filter pods
5. Re jet carbs plus other stuff
6. different plugs
7. Woodcraft clip on bars
8. Buel Xb foot pegs
9. Koso RX2 dash
10. A selection of gears
11. S.S. brake lines Galfer
12. Lower front and rear with lowering links.
13. metal chain guard
14. hugger
15. kill switch
16. Safety wire everything
17. Ignition mods
    18 Cut down gas tank
    19 ZX14 mirrors
    20 remove rear fender relocate tag.
    21 Battery tender plug and wire for heated vest and gloves
    22 swing arm spools
    23 rear set cowl

Soon to come:

1. Adjustable cam sprockets
2. another ignition system
3. Carbs of some sort.
4. another engine
5. ceramic bearings
6. non O ring chain.

latest mods.
I have spent all winter modding my bike to race in April.
fromt to back

front tire Dunlop racing Slick 95 70 17
paint front rim silver
metal valve stem

airteck front fairing
mounted KOSO Rx2 dash in nose of fairing
Removed all headlight wiring and switches
Remove all plastic around the dash .
Remove all metal clips and wire hangers

pingle kill switch

mount clip on bars below top tree
cut top off fairings to clear clip ons

strip bars and move clip on bars in 3 inches

cut the top of the tank down by 6 inches (done last year)
raised compression to 13 to 1
adjustable cam sprockets
cut down top of cylinder block
Keihin 32 mm CR special carbs
Nojima moto GP exhaust

Remove all air box and air filters. Velocity stacks
new #cr9 plugs
Strip frame and remove all metal brackets and paint red
Quick disconnect for fuel lines

Move rear foot peg sets back and inch
mount rear hugger
metal chain guard

rear rim painted silver
metal valve stem
Dunlop slick 125 70 17

reposition rear master cylinder
remove all lights and wiring

then painted it yellow and had Sighs by Tomorrow do the lettering

total weight of bike with fuel oil ready to go is 290 lb
total hp is over 32 hp at 12700 rpm

I have not ridden it yet.

http://www.youtube.com/watch?v=2AIMuOcmGWc

[miks]

Tinted my headlights & indicators today. They probably do hinder the light output at night, but to counter that I'll probably ride with high beams on.

[IMG][/IMG]

[bigair]

With only 380 miles on the machine the list is short.

1. CycleControl adj. levers ( black)
2. Roaring toyz risers (black)

Should have rearset extenders very soon.

[CC Cowboy]

Bought bike, rode bike a few thousand miles, changed the oil a few times, didn't do any mods (not even cutting the rear fender), sold bike for a nice profit.

[Betlog]

Originally Posted by Racer x

latest mods.
I have spent all winter modding my bike to race in April.
fromt to back

front tire Dunlop racing Slick 95 70 17
paint front rim silver
metal valve stem

airteck front fairing
mounted KOSO Rx2 dash in nose of fairing
Removed all headlight wiring and switches
Remove all plastic around the dash .
Remove all metal clips and wire hangers

pingle kill switch

mount clip on bars below top tree
cut top off fairings to clear clip ons

strip bars and move clip on bars in 3 inches

cut the top of the tank down by 6 inches (done last year)
raised compression to 13 to 1
adjustable cam sprockets
cut down top of cylinder block
Keihin 32 mm CR special carbs
Nojima moto GP exhaust

Remove all air box and air filters. Velocity stacks
new #cr9 plugs
Strip frame and remove all metal brackets and paint red
Quick disconnect for fuel lines

Move rear foot peg sets back and inch
mount rear hugger
metal chain guard

rear rim painted silver
metal valve stem
Dunlop slick 125 70 17

reposition rear master cylinder
remove all lights and wiring

then painted it yellow and had Sighs by Tomorrow do the lettering

total weight of bike with fuel oil ready to go is 290 lb
total hp is over 32 hp at 12700 rpm

I have not ridden it yet.

http://www.youtube.com/watch?v=2AIMuOcmGWc

Good stuff. What's the reason behind the lowering?

[Racer x]

Land speed racing is about horse power VS drag. SO I want to make the bike as small as possible. most of that involves hiding my body. I cut the tank down and moved the pegs back and the bars forward and close together. trying to hide behind the fairings, After that I lowered the front to stick the tire as far up into the fairing as possible. the rear is set to make my back flat when my chin is against the tank.

[Ramen]

In chronological order:

1. Ghetto fender chop +
2. Shimmed carb needles +
3. Snorkel removal +
4. Throttle cable ziptie mod +
5. Fuel cap noise elimination mod +
6. JT 15T front sprocket swap +

This bike keeps getting better and better!

[deezyellownutz]

1. Roaring Toyz Risers
2. Roaring Toyz Lowering Links
3. Roaring Toys Kickstand
4. R&G Frame Sliders
5. Rear Spools
6. GPR Steering Damper
7. Tsukigi Full SS Exhaust
8. DynoJet Stage II Kit
9. R&G Tidy Tail
10. LED Turn Signal Bulbs
11. Bike Bolts Full Fairing Kit
12. Custom Pearl White Paint Job

[Anteraan]

Nothing major here, but everything I have I'm glad I did:

1. ZG Double Bubble Windscreen (light smoke)
2. Mirror Extenders (most important mod on the bike)
3. Fast Guys Cycle pack
4. Competition Werkes FE

IF I do anything else, it will probably be powdercoating the wheels to match the bodywork. But to be brutally honest, I doubt I'll sink any more cash into the 250. I'll save for another bike instead (probably the Sprint ST, possibly a 600). 11 months into ownership, I enjoy the 250 immensely, but find myself ready (skill-wise) for some more bike. If I were actually willing to trade the 250, I would have last week, but I can't see myself giving it up.

[TrueFader]

1. HR motorsports slip on exhaust
2. dynojet jet kit
3. targa fender eliminator

future mods being put on hold because i'd rather do trackdays then spend the money on the bike...

1. clip-ons
2. brake lines
3. air filter