January 13th, 2020, 04:08 PM | #1 |
ninjette.org newbie
Name: Bob
Location: Canada
Join Date: Dec 2018 Motorcycle(s): Kawi 250r (Race bike) Posts: 8
|
Squish
Does anyone know what the stock squish is for a 2009 ninja 250?
Thanks |
|
January 13th, 2020, 06:09 PM | #2 |
ninjette.org sage
Name: Kevin
Location: Portland, OR
Join Date: Oct 2013 Motorcycle(s): Ninja 250R, Tiger 800 XRT Posts: 828
|
What do you mean by "squish"?
__________________________________________________
bike * miles = smiles smiles / bike = miles smiles / miles = bike |
|
January 13th, 2020, 07:40 PM | #3 |
ninjette.org newbie
Name: Bob
Location: Canada
Join Date: Dec 2018 Motorcycle(s): Kawi 250r (Race bike) Posts: 8
|
The distance between the piston and the outer rim of the head. Making the squish smaller by milling the head or base can increase compression ratio
|
|
January 16th, 2020, 09:48 PM | #4 |
CCS Amateur #501
Name: Dave
Location: Iowa
Join Date: Jun 2015 Motorcycle(s): '09 250 SE 'Booger' Posts: 406
|
Mine measured .035", with .010 of that being the head gasket and the 025 balance from cylinder to piston crown.
|
|
January 17th, 2020, 05:25 PM | #5 |
ninjette.org newbie
Name: Bob
Location: Canada
Join Date: Dec 2018 Motorcycle(s): Kawi 250r (Race bike) Posts: 8
|
I'm guessing yours had some work done to it than. Mine is around 0.070
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[motorcyclistonline] - MC Garage Video: How To Check Engine Squish Clearance | Ninjette Newsbot | Motorcycling News | 0 | February 4th, 2016 10:00 PM |
Cop tries to squish some squids | akima | Videos | 32 | June 20th, 2012 06:54 PM |
|
|