ninjette.org

Go Back   ninjette.org > General > General Motorcycling Discussion

Notices

Reply
 
Thread Tools
Old April 22nd, 2018, 01:15 PM   #1
NinjaNoobs
ninjette.org newbie
 
Name: Guershon
Location: Brooklyn
Join Date: Oct 2017

Motorcycle(s): Ninja 250r

Posts: 3
Locate loose electrical wire connections

Hi everyone. The other day my when I was about to head out, I found that my bike was hit while parked in the street. My turn signals were working fine after I started it up, and I used my bike to get to my destination. The turn signals also worked when I left my destination to head back home hours later. The next day when I started up my bike, I noticed that neither of my turn signals worked, and the RPM backlight on my dashboard did not work. I'm guessing some connections where knocked loose. Does anybody know where these connections that are loose may be located? I would like to have some sort of idea before taking off the fairings to save some time, because I will have to do this in the street since I live in an apartment.
NinjaNoobs is offline   Reply With Quote




Old April 22nd, 2018, 01:36 PM   #2
DannoXYZ
ninjette.org certified postwhore
 
Name: AKA JacRyann
Location: SF East Bay
Join Date: Dec 2011

Motorcycle(s): CB125T, Ninja250R racer, Ninja250R street bike, EX250F#1, EX250F#2, VF500F, CBR600RR

Posts: A lot.
MOTM - Nov '17
Sorry to hear about damage! I'm thinking about 360-degree camera for instances like this. Do you have 2008-2012?

There's large bundle of wires under bodywork near right knee. Also connector for right-front turn-signal is there as well. Wire bundle may be damaged, look for scratched and exposed insulatio˝.
DannoXYZ is offline   Reply With Quote


Old April 22nd, 2018, 04:45 PM   #3
NinjaNoobs
ninjette.org newbie
 
Name: Guershon
Location: Brooklyn
Join Date: Oct 2017

Motorcycle(s): Ninja 250r

Posts: 3
I have a 2008 ninja. I'm going to check there when it's a nice day and my screws won't get blown away while I take the fairings off lol. I'm also thinking about checking under the front fairing where the dashboard is. I tried taking a peek in between the side fairing (on the left side because that's where it was hit) by removing the black panels and the wires looked fine. Thanks for the advice. I'll post my findings when I work on the bike.
NinjaNoobs is offline   Reply With Quote


Reply




Similar Threads
Thread Thread Starter Forum Replies Last Post
Loose Wire, thoughts on where? VaFish 1986 - 2007 Ninja 250R Tech Talk 15 December 11th, 2015 02:09 PM
I don't know where to locate, it's N250 vs. N300 Somchai 2008 - 2012 Ninja 250R Tech Talk 2 December 9th, 2015 04:49 AM
[American Motorcyclist Association] - Near-perfect wire-to-wire effort gives veteran Ninjette Newsbot Motorcycling News 0 March 11th, 2015 07:40 AM
[motorcyclistonline] - Vintage Connections Electrical Repair Kit | MC Tested Ninjette Newsbot Motorcycling News 0 May 16th, 2011 09:30 PM
[motorcyclistonline] - New Permatex® Liquid Electrical Tape Keeps Electrical Connect Ninjette Newsbot Motorcycling News 0 February 26th, 2011 01:20 AM


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Motorcycle Safety Foundation

All times are GMT -7. The time now is 07:05 PM.


remote server monitor
Powered by vBulletin®
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Except where otherwise noted, all site contents are ę Copyright 2016 ninjette.org, All rights reserved.