March 7th, 2019, 12:20 PM | #1 |
ninjette.org member
Name: Mike
Location: CA
Join Date: Aug 2017 Motorcycle(s): 2009 250r Posts: 42
|
'09 Ninja 250r for sale - unfinished and cheap
Hi all,
I had the best intentions when I started this project, but as most of us have experienced, this project hit a wall and I now need to move on. I'm moving soon from a house with a garage to a condo without any garage. I need the bike and all the great parts to find a new home - one that will actually finish this bike! $300 gets you the following: 2009 Ninja 250r with clean/current California title -Pireli tires -Motion Pro quick turn throttle tube -Woodcraft Clipons -eBay rearsets -OEM tail fairings (eBay) -eBay levers -eBay fork preload adjusters -OEM seat (eBay) -eBay rear cowl -Apex stainless front brake line -gas tank Stomp Grips -PMC pair removal plate -blue LEDs for instrument cluster -Racetech fork springs -Racetech gold valves -eBay double bobble windscreen -chain/sprockets (please refer to this thread: https://www.ninjette.org/forums/showthread.php?t=301148 ) Since the last post in the build thread, I pull the fairings back off to keep pushing forward. I installed the rearsets and mocked the clipons. I started wiring the rear signals and tailight, mounted the rear tire, new chain and sprockets... I'm hoping someone from this forum (a Ninja enthusiast) will pick this up. If I don't get any interest here I'll be posting it for sale elsewhere relatively soon. Please contact me via PM with your email address if interested. And please only reply if you know you're 100% going to buy the bike. If you're local (SF Bay Area) I may be able to deliver everything to you. Thanks, Mike
__________________________________________________
2009 Ninja 250r - K&N air filter (R-0990), Dynojet Stage 2 (needle - clip at 3rd from top with one washer, 110 mains, 38 pilots, mixture screw 3 turns out), Area P full exhaust, PMC smog plate |
|
March 7th, 2019, 01:50 PM | #2 |
ninjette.org certified postwhore
Name: Colin
Location: Bay Area
Join Date: Feb 2011 Motorcycle(s): '96 EX250 Posts: A lot.
|
I'm in SF. Just sent you a PM.
__________________________________________________
Ç¥ñ頻| ßÿ Ñâ7µ®é. Äñt¡~§º¢Ïä| ßý Çhøî©è. |
|
March 7th, 2019, 02:21 PM | #3 |
ninjette.org member
Name: Mike
Location: CA
Join Date: Aug 2017 Motorcycle(s): 2009 250r Posts: 42
|
Thanks Colin. PMs replied.
To answer a couple questions: no shipping (I'm selling it cheap in hopes of a fast/easy sale to a local enthusiast), and it was running but the idle was hanging. The carbs need more adjustment to eliminate the rev hang. I would have zero hesitation to ride this bike on the street once all the provided parts are installed and the carbs are sorted. Thanks Mike
__________________________________________________
2009 Ninja 250r - K&N air filter (R-0990), Dynojet Stage 2 (needle - clip at 3rd from top with one washer, 110 mains, 38 pilots, mixture screw 3 turns out), Area P full exhaust, PMC smog plate |
|
March 7th, 2019, 07:20 PM | #4 |
ninjette.org certified postwhore
Name: Roger
Location: Mitchell, South Dakota
Join Date: Apr 2014 Motorcycle(s): 1978 Z1R, 1999 EX250 Posts: A lot.
MOTY - 2018, MOTM - Oct '16
|
Wish I was about 1500 miles closer, anyway good luck!
__________________________________________________
|
|
March 8th, 2019, 04:13 PM | #5 |
ninjette.org member
Name: Mike
Location: CA
Join Date: Aug 2017 Motorcycle(s): 2009 250r Posts: 42
|
Sold! Thanks Colin, enjoy
__________________________________________________
2009 Ninja 250r - K&N air filter (R-0990), Dynojet Stage 2 (needle - clip at 3rd from top with one washer, 110 mains, 38 pilots, mixture screw 3 turns out), Area P full exhaust, PMC smog plate |
|
March 8th, 2019, 07:19 PM | #6 |
ninjette.org certified postwhore
Name: Colin
Location: Bay Area
Join Date: Feb 2011 Motorcycle(s): '96 EX250 Posts: A lot.
|
I'll try, but my wife is already eyeballing it for herself.
__________________________________________________
Ç¥ñ頻| ßÿ Ñâ7µ®é. Äñt¡~§º¢Ïä| ßý Çhøî©è. |
|
March 8th, 2019, 08:50 PM | #7 |
ninjette.org certified postwhore
Name: Roger
Location: Mitchell, South Dakota
Join Date: Apr 2014 Motorcycle(s): 1978 Z1R, 1999 EX250 Posts: A lot.
MOTY - 2018, MOTM - Oct '16
|
Looks like it's going to a good home!
__________________________________________________
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Tons of AGV Sport Gloves For Sale CHEAP | outasight20 | Gear-related | 18 | July 23rd, 2014 06:38 AM |
Bell Revolver on Sale, cheap | Heed | Gear-related | 34 | August 7th, 2012 06:37 PM |
eBay : - Cheap teknic chicane suit for sale | psych0hans | Gear-related | 0 | June 18th, 2012 10:53 AM |
|
|