ninjette.org

Go Back   ninjette.org > 1986 - 2007 Ninja 250R > 1986 - 2007 Ninja 250R Tech Talk

Notices

Reply
 
Thread Tools
Old March 9th, 2013, 10:42 PM   #1
espacef1fan
ninjette.org member
 
Name: ADAM
Location: fort campbell, ky
Join Date: Mar 2012

Motorcycle(s): Suzuki TL1000R

Posts: 112
Emulator install.

Based on these instructions:

http://faq.ninja250.org/wiki/Install...rs_and_springs

It APPEARS I do not have to change fork seals to isntall emulators and springs. Am I high ? Or am I correct in this understanding?
__________________________________________________
Have Pregen 250. WTT for a dual sport... 250cc and up
espacef1fan is offline   Reply With Quote




Old March 10th, 2013, 01:10 PM   #2
GeorgeRYoung
ninjette.org member
 
Name: George
Location: Ottawa, Canada
Join Date: Jun 2011

Motorcycle(s): EX250, C10 Concours

Posts: 109
no need to change fork seals

You don't need to separate the sliders from the fork tubes, so the seals can stay where they are.

You will need to get the damper rods out of the sliders to do the drilling.
GeorgeRYoung is offline   Reply With Quote


Old March 10th, 2013, 01:15 PM   #3
espacef1fan
ninjette.org member
 
Name: ADAM
Location: fort campbell, ky
Join Date: Mar 2012

Motorcycle(s): Suzuki TL1000R

Posts: 112
Quote:
Originally Posted by GeorgeRYoung View Post
You don't need to separate the sliders from the fork tubes, so the seals can stay where they are.

You will need to get the damper rods out of the sliders to do the drilling.
But if I understand it correctly, the damper rods will come out without removing the sliders, (basically what is written up in that link)


If so, this makes my life ALOT easier.
__________________________________________________
Have Pregen 250. WTT for a dual sport... 250cc and up
espacef1fan is offline   Reply With Quote


Old March 10th, 2013, 02:48 PM   #4
GeorgeRYoung
ninjette.org member
 
Name: George
Location: Ottawa, Canada
Join Date: Jun 2011

Motorcycle(s): EX250, C10 Concours

Posts: 109
damper rod extraction

Once you get the bolt at the bottom out, the damper rods can pass thru the fork tubes and out the top.
GeorgeRYoung is offline   Reply With Quote


Reply




Similar Threads
Thread Thread Starter Forum Replies Last Post
Front Race Tech Emulator installed old3 2013 - 2017 Ninja 300 Tech Talk 54 October 26th, 2017 08:09 PM
Area P Install eddiekay 2013 - 2017 Ninja 300 Tech Talk 13 June 8th, 2014 12:54 PM
WTB: Fork emulator ChrisJuliano Items Wanted 0 January 24th, 2014 07:34 PM
Any one install this?? istreefitty 2008 - 2012 Ninja 250R Farkles 3 August 10th, 2009 06:07 PM
Parts install? mista350z 2008 - 2012 Ninja 250R Tech Talk 4 May 24th, 2009 08:24 PM


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Motorcycle Safety Foundation

All times are GMT -7. The time now is 05:35 AM.


Website uptime monitoring Host-tracker.com
Powered by vBulletin®
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Except where otherwise noted, all site contents are © Copyright 2022 ninjette.org, All rights reserved.