Springs, who sales them and what fits?

ahamay · March 8th, 2013, 02:18 AM

I'm about to order some pre-load adjusters and would like to upgrade my front springs as well but, I haven't had to much luck finding places that make/have them. Maybe brought up before but do the new gen 250 springs fit the 300 and does anyone have a good place to order from? I'm about to start tracking this little bike and definitely need to firm up the suspension. With gear I'm probably sitting in the 235/240ish range.

ahamay · March 8th, 2013, 03:59 PM

SO maybe common knowledge but it wasn't to me, just got a reply from racetech and YES the 08-12 Ninja 250 springs work for the 300. Think I'm going to order the pre-load adjuster and a set of springs to start with.

I found a thread on the ninja300 forum and there was some good info in it about also needing an emulator. Not sure if I'm going to go that deep yet but will report back once I have installed the above parts and hit the track a few times.

March 8th, 2013, 02:18 AM	#1
ahamay ninjette.org member Name: Non-ya Location: Socal Join Date: Mar 2013 Motorcycle(s): Tree Hundred Posts: 72	Springs, who sales them and what fits? I'm about to order some pre-load adjusters and would like to upgrade my front springs as well but, I haven't had to much luck finding places that make/have them. Maybe brought up before but do the new gen 250 springs fit the 300 and does anyone have a good place to order from? I'm about to start tracking this little bike and definitely need to firm up the suspension. With gear I'm probably sitting in the 235/240ish range.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
new springs, emulators, springs sound noisy?	subxero	2008 - 2012 Ninja 250R Tech Talk	6	April 19th, 2014 04:14 AM
Lock that Fits Under the Passenger Seat	Ralgha	General Motorcycling Discussion	4	February 1st, 2014 05:08 PM
[motorcycle.com] - Polaris Reports Q4 2013 Sales Results Motorcycle Sales Up 94%!	Ninjette Newsbot	Motorcycling News	0	January 28th, 2014 03:30 PM
Motorcycle Security Chain - What fits best?	UltrA_09	2008 - 2012 Ninja 250R Farkles	2	April 27th, 2011 08:58 PM
[topix.net] - Car sales drop for the second month in a row; two-wheeler sales zip ahe	Ninjette Newsbot	Motorcycling News	0	September 13th, 2008 12:53 PM

March 8th, 2013, 03:59 PM	#2
ahamay ninjette.org member Name: Non-ya Location: Socal Join Date: Mar 2013 Motorcycle(s): Tree Hundred Posts: 72	SO maybe common knowledge but it wasn't to me, just got a reply from racetech and YES the 08-12 Ninja 250 springs work for the 300. Think I'm going to order the pre-load adjuster and a set of springs to start with. I found a thread on the ninja300 forum and there was some good info in it about also needing an emulator. Not sure if I'm going to go that deep yet but will report back once I have installed the above parts and hit the track a few times.