Hey Unregistered! Parting out TWO 2010 Ninja 250s - Page 3

PartsNinja · November 1st, 2013, 07:00 AM

Quote:

Originally Posted by howardt008

i just needed the right side blinker if that would be possible

Sure thing,

Ill get a listing up on the website for individual turn signals within a day or two.

I'll post the link in this thread when its up.

bitaria · November 1st, 2013, 02:00 PM

How did I just see this!?

I still need a front wheel with rotor. Scrapes are ok, but no dents on the lip plz. It should be in a pretty good condition overall. The one that shows as in-stock on the site has a bit too much of a bent out lip.

PartsNinja · November 1st, 2013, 02:33 PM

Quote:

Originally Posted by bitaria

How did I just see this!?

I still need a front wheel with rotor. Scrapes are ok, but no dents on the lip plz. It should be in a pretty good condition overall. The one that shows as in-stock on the site has a bit too much of a bent out lip.

I'm not really sure what you are trying to say here.

alex.s · November 1st, 2013, 03:39 PM

i think he is saying he wants you to go out and find him a mint wheel and then sell it to him because the one on your site (http://oemninjaparts.com/shop/front-rim-2/) has too many scratches and apparently (i don't see it) has a bent lip?? confusing post

PartsNinja · November 1st, 2013, 03:44 PM

Quote:

Originally Posted by alex.s

i think he is saying he wants you to go out and find him a mint wheel and then sell it to him because the one on your site (http://oemninjaparts.com/shop/front-rim-2/) has too many scratches and apparently (i don't see it) has a bent lip?? confusing post

Welp, when I gets me one in better shape (the lip does have a bit of a bent portion to it) I certainly will post it up.

Major_Paine · November 2nd, 2013, 03:12 AM

woah my names in the title?

how much for a 250 swing arm with rim rotors etc. i need the entire rear end

PartsNinja · November 2nd, 2013, 06:55 AM

Quote:

Originally Posted by Major_Paine

woah my names in the title?

how much for a 250 swing arm with rim rotors etc. i need the entire rear end

Well,
here is the swingarm:
http://oemninjaparts.com/shop/swingarm/
Sprocket:
http://oemninjaparts.com/shop/rear-sprocket/
Chain tensioners:
http://oemninjaparts.com/shop/chain-tensioners/
Cush drive:
http://oemninjaparts.com/shop/cush-drive/
I have a rear rim and rotor that will be listed around $110-$140 in the next few days.

Major_Paine · November 2nd, 2013, 12:53 PM

also need the axle, rear master brake cylinder, caliper, rotor. the ENTIRE rear set up.

PartsNinja · November 2nd, 2013, 01:03 PM

Quote:

Originally Posted by Major_Paine

also need the axle, rear master brake cylinder, caliper, rotor. the ENTIRE rear set up.

Hi there,
Good news is all of our prices include FREE shipping, bad news is we don't have "the ENTIRE rear set up" listed on the site, you would have to buy the individual parts off of the site:
Rear axle:
http://oemninjaparts.com/shop/rear-axle/
Rear brake assembly:
http://oemninjaparts.com/shop/rear-brake-assembly/

We have a good condition rim/rotor/tire that will be listed tonight.

PartsNinja · November 2nd, 2013, 01:09 PM

Chain guard:
http://oemninjaparts.com/shop/chain-guard/

PartsNinja · November 2nd, 2013, 03:19 PM

Quote:

Originally Posted by rc-rick

Ok, cool! 2 things. 1, I need the part that the sprocket attaches to, not the rubber pieces. 2, the linkage NEEDS to be from a '10+ as it weighs less than the '08-'09.

http://oemninjaparts.com/shop/sprocket-carrier/

There yah go! Sorry for the wait.

PartsNinja · November 4th, 2013, 07:32 AM

Quote:

Originally Posted by howardt008

i just needed the right side blinker if that would be possible

Ok, turn signals are now also listed for sale individually:
http://oemninjaparts.com/shop/turn-signal/

November 4th, 2013, 11:20 AM

Hi,

Would you also happen to have the footbrake pedal?

PartsNinja · November 4th, 2013, 11:37 AM

Quote:

Originally Posted by rjizzle36

Hi,

Would you also happen to have the footbrake pedal?

I do have one, the tip of it has a scrape and the flat part that you press on with your foot was bent (I bent it back into pretty good shape)
$15 shipped if you want it.

InvisiBill · November 6th, 2013, 01:01 PM

I'm looking for some smaller fork/wheel parts:

Speedo drive (41078-0004 CASE-ASSY-METER GEAR)
Wheel bearing spacer (92152-0525 COLLAR,FR HUB,L=74.5)
2x Fork guard (55020-0329 GUARD,INNER TUBE)

By the way, http://www.kawasaki.com/SITE/VIVEHIC...Model=EX250JAF will open up a new window with clickable 2010 parts diagrams.

PartsNinja · November 6th, 2013, 05:11 PM

Quote:

Originally Posted by InvisiBill

I'm looking for some smaller fork/wheel parts:

Speedo drive (41078-0004 CASE-ASSY-METER GEAR)
Wheel bearing spacer (92152-0525 COLLAR,FR HUB,L=74.5)
2x Fork guard (55020-0329 GUARD,INNER TUBE)

By the way, http://www.kawasaki.com/SITE/VIVEHIC...Model=EX250JAF will open up a new window with clickable 2010 parts diagrams.

Hi there,
Speedometer gear/cable:
http://oemninjaparts.com/shop/speedo...able-and-gear/

I do have a set of fork guards.

$35 if you want the speedo gear/cable and fork guards. Just checkout of the website and make a note on checkout that you want the guards as well and Ill send you an extra paypal invoice for the $15

I just sold my last front wheel, so I do not have a bearing spacer.

PartsNinja · November 8th, 2013, 07:36 AM

Picking up this bike today, put in your requests if you need anything before someone else beats you to it:

The rims seem to be a very popular item!

Dmj_88 · November 8th, 2013, 11:55 AM

front wheel

PartsNinja · November 9th, 2013, 03:08 PM

Quote:

Originally Posted by Dmj_88

front wheel

It may be spoken for already. I should know today or tomorrow if its available.

alex.s · November 9th, 2013, 08:41 PM

sorry drew, called dibs on the wheel ahead of time

thanks for the parts dan. hopefully soon i'll have this bike on the move

Tragon · November 9th, 2013, 10:53 PM

Is the tank in good shape and how much if so?

Same goes for the front fender

PartsNinja · November 10th, 2013, 10:44 AM

Quote:

Originally Posted by alex.s

sorry drew, called dibs on the wheel ahead of time

thanks for the parts dan. hopefully soon i'll have this bike on the move

Front rim has found a new owner! I'll give everyone a heads up before I pick up my next bike.

PartsNinja · November 10th, 2013, 10:46 AM

Quote:

Originally Posted by Tragon

Is the tank in good shape and how much if so?

Same goes for the front fender

Unfortunately, both the tank and the fender are currently in the trash can. They were completely unserviceable.

There are several tanks and fenders available here:
http://oemninjaparts.com/product-category/body/
But i'm sure you were looking for the Special Edition color.

PartsNinja · November 10th, 2013, 10:58 AM

Quote:

Originally Posted by Tragon

Is the tank in good shape and how much if so?

Same goes for the front fender

I do have a Special edition tank on the race build bike and it IS in good shape. I would be willing to swap it with another color so you could take the SE tank. $130 shipped. You can see the tank here:
http://oemninjaparts.com/shop/racebuildbike/

PartsNinja · November 10th, 2013, 04:39 PM

In honor of Veterans Day we are offering a 10% discount to the first 10 customers at oemninjaparts.com! Have a great weekend and stay safe! Use coupon code at checkout: veteransday10

TeleRomeo · November 20th, 2013, 08:26 AM

How did I not see this... LOLZ
Great thread Title!!

Is the bike still available?

Crriiissss · November 22nd, 2013, 07:21 AM

If still available, how much shipped to 07306 for a shift lever and the green front headlight fairing? Btw, any scratches or cracks on the front fairing? TIA

PartsNinja · November 22nd, 2013, 07:35 AM

All prices on website include free shipping in listed price.

No shift levers (that are undamaged) are available at this time.

All available fairings can be viewed at http://oemninjaparts.com/product-category/body/

PartsNinja · November 22nd, 2013, 07:39 AM

Quote:

Originally Posted by TeleRomeo

How did I not see this... LOLZ
Great thread Title!!

Is the bike still available?

Hi there, yes the bike is still available: http://oemninjaparts.com/product-category/body/

CaptainPlatypus · November 29th, 2013, 12:58 AM

Hey PartsNinja, I'm still looking for a motor and finally have the funds for it. I'm considering the one listed on your site, but it has conflicting descriptions - in one field it says it needs a front sprocket and nut, in the other it says it needs nothing. Can you clarify for me?

Link: http://oemninjaparts.com/shop/ninja-250-motor/

PartsNinja · November 29th, 2013, 06:11 AM

Quote:

Originally Posted by CaptainPlatypus

Hey PartsNinja, I'm still looking for a motor and finally have the funds for it. I'm considering the one listed on your site, but it has conflicting descriptions - in one field it says it needs a front sprocket and nut, in the other it says it needs nothing. Can you clarify for me?

Link: http://oemninjaparts.com/shop/ninja-250-motor/

This has been fixed on the website. This is a great condition motor with 1,500 miles that needs nothing (aside from oil, we cannot ship motors with oil) to be installed and to run great.
-2010
-1,500 miles
-speedometer (broken) will be included with motor to show mileage
-free shipping
-30 day guarantee

tfkrocks · November 30th, 2013, 02:33 AM

Do you happen to have one of those rubber dampers that go on the frame at the point where the tank hooks on?

PartsNinja · November 30th, 2013, 11:43 AM

Quote:

Originally Posted by tfkrocks

Do you happen to have one of those rubber dampers that go on the frame at the point where the tank hooks on?

Indeed, I have a whole bin full of them. Do you need one or two?

Need anything else while im shipping that out?

tfkrocks · November 30th, 2013, 11:51 AM

Quote:

Originally Posted by PartsNinja

Indeed, I have a whole bin full of them. Do you need one or two?

Need anything else while im shipping that out?

If only you had the Ninja 300 parts I want

How much do you want for just one damper?

PartsNinja · November 30th, 2013, 11:55 AM

Quote:

Originally Posted by tfkrocks

If only you had the Ninja 300 parts I want

How much do you want for just one damper?

$5 shipped works.

We are actively pursuing several Ninja 300s this week!
I've got several scoped out in this coming weeks auctions. I'm really pushing to start listing 300 parts on the site within the next 2 weeks. I'll post up a new thread that has pictures of the bikes as we take them in.

PartsNinja · November 30th, 2013, 12:04 PM

Quote:

Originally Posted by tfkrocks

If only you had the Ninja 300 parts I want

How much do you want for just one damper?

Cool, thanks Rebecca. I'll get that out on monday.

tfkrocks · November 30th, 2013, 12:05 PM

Quote:

Originally Posted by PartsNinja

$5 shipped works.

We are actively pursuing several Ninja 300s this week!
I've got several scoped out in this coming weeks auctions. I'm really pushing to start listing 300 parts on the site within the next 2 weeks. I'll post up a new thread that has pictures of the bikes as we take them in.

Sweet

I'm looking for a black lower left fairing and the instrument cluster fairing if you happen to come across those in good condition.

ramykandil · December 1st, 2013, 07:19 PM

Hello, looking for a ninja 250 2008+ rearset with brake lever attached if possible. Please let me know ASAP - I just put an order in for a rear brake set-up, so if you have the rearset in stock you can ship them together, thanks ahead of time!

PartsNinja · December 1st, 2013, 07:32 PM

Quote:

Originally Posted by ramykandil

Hello, looking for a ninja 250 2008+ rearset with brake lever attached if possible. Please let me know ASAP - I just put an order in for a rear brake set-up, so if you have the rearset in stock you can ship them together, thanks ahead of time!

Hi there, we will look through the shop to see if we have a rearset available before we ship your order, I'm assuming you're referring to the right rearset?
Thanks!

ramykandil · December 1st, 2013, 07:44 PM

Quote:

Originally Posted by PartsNinja

Hi there, we will look through the shop to see if we have a rearset available before we ship your order, I'm assuming you're referring to the right rearset?
Thanks!

Yes indeed

November 1st, 2013, 03:39 PM	#84
alex.s wat Name: wat Location: tustin/long beach Join Date: Sep 2009 Motorcycle(s): wat Posts: Too much. Blog Entries: 5 MOTM - Oct '12, Feb '14	i think he is saying he wants you to go out and find him a mint wheel and then sell it to him because the one on your site (http://oemninjaparts.com/shop/front-rim-2/) has too many scratches and apparently (i don't see it) has a bent lip?? confusing post __________________________________________________

November 2nd, 2013, 01:09 PM	#90
PartsNinja Ninja Parts Master Name: Dan Location: Houma, Louisiana Join Date: Aug 2013 Motorcycle(s): 2011 Ducati Streetfighter 1098, 2014 Honda CB1100 Cafe, 2007 SV1000S, Quite a few 2008-2012 Ninja 250s Posts: 366	Chain guard: http://oemninjaparts.com/shop/chain-guard/ __________________________________________________ Add me on Instagram: @d_jalb Or follow me on eBay: PartsNinja

November 8th, 2013, 07:36 AM	#97
PartsNinja Ninja Parts Master Name: Dan Location: Houma, Louisiana Join Date: Aug 2013 Motorcycle(s): 2011 Ducati Streetfighter 1098, 2014 Honda CB1100 Cafe, 2007 SV1000S, Quite a few 2008-2012 Ninja 250s Posts: 366	Picking up this bike today, put in your requests if you need anything before someone else beats you to it: The rims seem to be a very popular item! __________________________________________________ Add me on Instagram: @d_jalb Or follow me on eBay: PartsNinja Last futzed with by PartsNinja; November 10th, 2013 at 11:02 AM.

November 9th, 2013, 08:41 PM	#100
alex.s wat Name: wat Location: tustin/long beach Join Date: Sep 2009 Motorcycle(s): wat Posts: Too much. Blog Entries: 5 MOTM - Oct '12, Feb '14	sorry drew, called dibs on the wheel ahead of time thanks for the parts dan. hopefully soon i'll have this bike on the move __________________________________________________

November 9th, 2013, 10:53 PM	#101
Tragon ninjette.org member Name: Andrew Location: Michigan Join Date: May 2013 Motorcycle(s): 81 KZ 750, 82 GPZ 750, 08 Ninja 250 (Track toy) Posts: 20	Is the tank in good shape and how much if so? Same goes for the front fender __________________________________________________ I admit it, I couldnt use a 600 the way it should be so I decided to restart my bike riding career and learn the right way...ON A TWO FIDDY

November 1st, 2013, 02:00 PM	#82
bitaria ninjette.org member Name: Oleg Location: Seattle WA Join Date: Aug 2013 Motorcycle(s): CRF450X, CRF250R/SM, Husky 630 SMS, Ninja 250R Posts: 144	How did I just see this!? I still need a front wheel with rotor. Scrapes are ok, but no dents on the lip plz. It should be in a pretty good condition overall. The one that shows as in-stock on the site has a bit too much of a bent out lip.

November 2nd, 2013, 03:12 AM	#86
Major_Paine ninjette.org member Name: Ernie Location: LA area Join Date: Sep 2011 Motorcycle(s): 2004 ninja 250 (in progress), 2009 cbr600rr Posts: 122	woah my names in the title? how much for a 250 swing arm with rim rotors etc. i need the entire rear end

November 2nd, 2013, 12:53 PM	#88
Major_Paine ninjette.org member Name: Ernie Location: LA area Join Date: Sep 2011 Motorcycle(s): 2004 ninja 250 (in progress), 2009 cbr600rr Posts: 122	also need the axle, rear master brake cylinder, caliper, rotor. the ENTIRE rear set up.

November 4th, 2013, 11:20 AM	#93
rjizzle36 Guest Posts: n/a	Hi, Would you also happen to have the footbrake pedal?

November 6th, 2013, 01:01 PM	#95
InvisiBill EX500 full of EX250 parts Name: Bill Location: Grand Rapids-ish, MI Join Date: Jul 2012 Motorcycle(s): '18 Ninja 400 • '09 Ninja 500R (selling) • '98 VFR800 (project) • '85 Vulcan VN700 (sold) Posts: A lot. Blog Entries: 1 MOTM - Aug '15	I'm looking for some smaller fork/wheel parts: Speedo drive (41078-0004 CASE-ASSY-METER GEAR) Wheel bearing spacer (92152-0525 COLLAR,FR HUB,L=74.5) 2x Fork guard (55020-0329 GUARD,INNER TUBE) By the way, http://www.kawasaki.com/SITE/VIVEHIC...Model=EX250JAF will open up a new window with clickable 2010 parts diagrams.

November 8th, 2013, 11:55 AM	#98
Dmj_88 ninjette.org member Name: Drew Location: Midwest Join Date: Nov 2012 Motorcycle(s): Many Posts: 68	front wheel

November 10th, 2013, 04:39 PM	#105
PartsNinja Ninja Parts Master Name: Dan Location: Houma, Louisiana Join Date: Aug 2013 Motorcycle(s): 2011 Ducati Streetfighter 1098, 2014 Honda CB1100 Cafe, 2007 SV1000S, Quite a few 2008-2012 Ninja 250s Posts: 366	In honor of Veterans Day we are offering a 10% discount to the first 10 customers at oemninjaparts.com! Have a great weekend and stay safe! Use coupon code at checkout: veteransday10 __________________________________________________ Add me on Instagram: @d_jalb Or follow me on eBay: PartsNinja

November 20th, 2013, 08:26 AM	#106
TeleRomeo ninjette.org member Name: Johnny Location: Houston Area Join Date: Apr 2013 Motorcycle(s): 2012 ninja 250, 08 GSXR 750 Posts: 10	How did I not see this... LOLZ Great thread Title!! Is the bike still available?

November 22nd, 2013, 07:21 AM	#107
Crriiissss ninjette.org member Name: Cristian Location: Look behind you Join Date: Aug 2011 Motorcycle(s): 2009 Ninja Thunder Blue(sold), 2004 Suzuki GS500f(sold), 2006 Ninja 250, 2013 Ninja 300 SE Posts: 70	If still available, how much shipped to 07306 for a shift lever and the green front headlight fairing? Btw, any scratches or cracks on the front fairing? TIA

November 22nd, 2013, 07:35 AM	#108
PartsNinja Ninja Parts Master Name: Dan Location: Houma, Louisiana Join Date: Aug 2013 Motorcycle(s): 2011 Ducati Streetfighter 1098, 2014 Honda CB1100 Cafe, 2007 SV1000S, Quite a few 2008-2012 Ninja 250s Posts: 366	All prices on website include free shipping in listed price. No shift levers (that are undamaged) are available at this time. All available fairings can be viewed at http://oemninjaparts.com/product-category/body/ __________________________________________________ Add me on Instagram: @d_jalb Or follow me on eBay: PartsNinja

November 29th, 2013, 12:58 AM	#110
CaptainPlatypus ninjette.org member Name: Eric Location: Los Angeles Join Date: Apr 2013 Motorcycle(s): '86 Honda VFR700 Posts: 173	Hey PartsNinja, I'm still looking for a motor and finally have the funds for it. I'm considering the one listed on your site, but it has conflicting descriptions - in one field it says it needs a front sprocket and nut, in the other it says it needs nothing. Can you clarify for me? Link: http://oemninjaparts.com/shop/ninja-250-motor/ Last futzed with by CaptainPlatypus; November 29th, 2013 at 12:58 AM. Reason: link

November 30th, 2013, 02:33 AM	#112
tfkrocks ninjette.org certified postwhore Name: Rebecca Location: SF Bay Area Join Date: Sep 2009 Motorcycle(s): 2013 Ninja 300 w/ ABS, 2014 NC700X, 2008 Ninja 250 (sold), 2002 Ninja 250 (sold) Posts: A lot. MOTM - Jan '18, Sep '13	Do you happen to have one of those rubber dampers that go on the frame at the point where the tank hooks on?

December 1st, 2013, 07:19 PM	#118
ramykandil ninjette.org member Name: ramy Location: nova Join Date: Jun 2013 Motorcycle(s): 09 250 Posts: 18	Hello, looking for a ninja 250 2008+ rearset with brake lever attached if possible. Please let me know ASAP - I just put an order in for a rear brake set-up, so if you have the rearset in stock you can ship them together, thanks ahead of time!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Parting Out :: 08+ Ninja 250 Track/Race Bike	abhijitz	Motorcycle-related	14	May 10th, 2014 07:32 AM
Parting Out 1988 Ninja 250	Finesse	Motorcycle-related	19	April 17th, 2014 09:12 PM
Parting out a 2010 Green Special Edition	htdub	Motorcycle-related	14	October 6th, 2012 05:40 PM
[kropotkin thinks...] - Moto2 Bikes To Run In Spain In 2009, With 250s In 2010	Ninjette Newsbot	Motorcycling News	0	December 12th, 2008 11:00 AM