SHINTO: Full Fender Eliminator

ThaiNinjaRR · March 6th, 2010, 08:44 AM

This is SHINTO's Full Fender Eliminator, with Removable Plate Holder.

This is made from Fibre Glass (Carbon Fibre Available upon Special Request)

This is a Full Cover, it totaly surrounds and covers the Tail light as one piece.
There are mount holes for your Rear indicator lights should you need.
And plate holes for your plate.

The Full cover can detatch from the lower part, should you not want to use it.

The Price for this is: $70

Here is a pic of the Item on a bike. (Look Carefullyat the tail)

Some more pics:

JokerSeven · March 6th, 2010, 09:39 AM

Very nice, very tempting. I like !

I would like to see more pics of it on the bike.

ThaiNinjaRR · March 6th, 2010, 09:49 AM

Quote:

Originally Posted by JokerSeven

Very nice, very tempting. I like !

I would like to see more pics of it on the bike.

i recently sent a few out, so thoes guys said they would send pics..

maybe i will have to remove my tail, and install these for more pics..hmmm
better wait for some of the recent buyers pics!

JokerSeven · March 6th, 2010, 10:22 AM

Thats fine, I just want to see some closer pics on the final fit and overall look. Its hard to see much on that one pic because of shadows. I assume these are shipping from Thailand, what is the shipping cost to the US ?

jonthechron · March 6th, 2010, 03:05 PM

I'm looking to buy a fender eliminator, and so far, this one is one of the best I've seen. But i would want to see a few more pics before I decide. Thanks, Jon

ThaiNinjaRR · March 6th, 2010, 11:26 PM

Quote:

Originally Posted by jonthechron

I'm looking to buy a fender eliminator, and so far, this one is one of the best I've seen. But i would want to see a few more pics before I decide. Thanks, Jon

I will post some later tonight.. i am on my way to the KAwasaki Factory here, We are having a massive kawa avent.

Some guys there have also gotten this from me, so i will take pics and post them here tonight!, hope this helps!

ThaiNinjaRR · March 6th, 2010, 11:29 PM

Quote:

Originally Posted by JokerSeven

Thats fine, I just want to see some closer pics on the final fit and overall look. Its hard to see much on that one pic because of shadows. I assume these are shipping from Thailand, what is the shipping cost to the US ?

Hi, The shipping cost to the states using 2-3 day DPEX currior service is $45
This is the best service i recomend, Full door to door tracking and full insurrence.
Sure there are cheeper (2week) options, but there is not tracking..
of course if you insist on cheaper postage, that is fine, i will find out the exact price.
Hope this helps

ThaiNinjaRR · March 7th, 2010, 04:26 AM

Ok guys, just took a few pics from a customers bike..
have a look.

He had it sprayed Glossy blak..

ThaiNinjaRR · March 8th, 2010, 07:52 PM

######SHIPPING UPDATE#######

Ok just back from the post office.
Here is a new Shipping costs for the Fender Eliminator

DPEX: 2-3 Days = $45 (Full Door to Door Tracking + Insurence)
EMS: 4-6 Days = $23 (Full Door to Door Tracking + Insurence)
EMS: 7-10 Days = $13 (Partial Tracking - Just Shipped and Recieved Notice+Insurence)
EMS: 14-20 Days = $8 (Partial Tracking - Just Shipped and Recieved Notice+Insurence)

The DPEX is Guaranteed date, The EMS is Estimated.

i was very to hear these shipping prices. i know the DPEX that i like to use for huggers is a bit off putting..(but i know no its not needed for smaller items.)

CZroe · March 9th, 2010, 03:26 AM

I'd like to see a way to bring those lobster-eye turn signals together just a bit.

They stick out entirely too far (DOT spec, but who cares, right?

) and it is even more obvious with a fender eliminator. Of course, you can always switch to new signals, but I've seen good results without doing that.

ThaiNinjaRR · March 9th, 2010, 04:29 AM

Quote:

Originally Posted by CZroe

I'd like to see a way to bring those lobster-eye turn signals together just a bit.

They stick out entirely too far (DOT spec, but who cares, right?

) and it is even more obvious with a fender eliminator. Of course, you can always switch to new signals, but I've seen good results without doing that.

meaning, so they dont stick out so far?.. i have options for that if you need

Well of course, there is just replacing them (i have about 10 diferent LED kinds & 10 Halogen Bulb)

OR, why not just remove the Flexible part on the inside...

If people are interested, i can post replacement lights here..
But why waste money

just shorten the ones you got!

maglin · March 10th, 2010, 01:52 AM

Hi!
Can you tell me if is possible to keep the metal brackets that originally holds the indicators?

jonthechron · March 10th, 2010, 07:35 AM

Don't forget to mention a minimum 8$ handling fee + local taxes!

so 70 = 95?

ThaiNinjaRR · March 10th, 2010, 09:20 AM

Quote:

Originally Posted by jonthechron

Don't forget to mention a minimum 8$ handling fee + local taxes!

so 70 = 95?

Um yeaaaaaaaaaaaaaaa... i dont know about any thing like that..lol

ThaiNinjaRR · March 10th, 2010, 09:21 AM

Quote:

Originally Posted by maglin

Hi!
Can you tell me if is possible to keep the metal brackets that originally holds the indicators?

i believe so, (have not tried, but can do) if you can get them of,then they will fit the new FE.

riiken · March 19th, 2010, 06:18 AM

If I buy multiple items from you, could I save on shipping?

ThaiNinjaRR · March 19th, 2010, 06:29 AM

Quote:

Originally Posted by riiken

If I buy multiple items from you, could I save on shipping?

Totally! i dont add anything for shipping profit wise, i chareg the true postage rate., so the more items you combine, the more you save over all.

aholeinthewor1d · March 22nd, 2010, 08:25 PM

i am def interested in ordering one of these...all of the ones ive seen where they fit around the tail light and u dont have to cut the stock fender..every one people said how they dont fit good and there would be gap on the sides of the piece and the tail light...i want to make sure this is a really nice good fit so it looks like it was made that way..let me know..maybe some more pictures?

ThaiNinjaRR · March 22nd, 2010, 08:43 PM

please refere to the many pics i have displayed above.

aholeinthewor1d · March 23rd, 2010, 06:17 PM

has anyone tried one of theses yet? looks awsome just want to hear how it fits....also does it just come plain and you have to paint it black urself?

ThaiNinjaRR · March 23rd, 2010, 06:33 PM

The FE comes in Matt, as shown in the orignal pic...

You can of course paint it yourself. or i do offer Automobile Grade Spray service. (aprx$15)

if your interested, feel free to PM me!
Cheers

petiteninja · April 6th, 2010, 07:21 PM

did you get my email earlier?

ThaiNinjaRR · April 6th, 2010, 08:50 PM

Quote:

Originally Posted by petiteninja

did you get my email earlier?

um, i dont know i got many, but none from your id..
where did you send it, to my support@shinto-racing.com??

ThaiNinjaRR · April 6th, 2010, 08:59 PM

Quote:

Originally Posted by petiteninja

did you get my email earlier?

Yes, i did reply. contact me again.

Scott1620 · April 17th, 2010, 04:20 PM

I just posted a review & installation thread for this fender elim in the farkles section here.

2010ninja · April 21st, 2010, 05:24 AM

im in adelaide mate, how would i go about getting 1?

ThaiNinjaRR · April 21st, 2010, 06:46 AM

Quote:

Originally Posted by 2010ninja

im in adelaide mate, how would i go about getting 1?

hey mate, you can just email me at support@shinto-racing.com, and i will process the order for you!

talk soon

wvninja · April 21st, 2010, 08:27 AM

Just bought one a few days ago from him. Waiting to get it.

ThaiNinjaRR · April 24th, 2010, 08:19 AM

Quote:

Originally Posted by onepeon

Paul,

Can you respond to my emails? I wanted to know if my taillight and relay was sent out yet. It's been almost 2 weeks since I paid.

Can you rush this?

Thanks

Hi, Sorry i hav had NO email from you, sure you can ask everyone, i respond to emails the second i get them... never a wait longer than 10h (sleeping)..
where have you been sending email to.?

please PM me here, or email me direct at support@shinto-racing.com

i have automatic notifications, on my coms, and phones. as soon as i get your mail i would respond the seconds i could..(unless im sleeping)

email me as stated above, i have checked my emails and orders.. i have had no order from your ID "onepeon"... have you changed ID?

Please email me asap.
thnx

wvninja · May 7th, 2010, 09:51 AM

awaiting a full refund now

Momaru · May 7th, 2010, 10:19 AM

You might consider cutting the guy some slack. His home is a freakin' battleground, people gettin KILLED out there and you're getting cheesed off about slow shipping for a motorcycle part? Not to mention even if it had shipped on time, there's a fair chance you still wouldn't have gotten it by now. International shipping takes time, lots of time. Not trying to start a ruckus, just suggesting some perspective.

wvninja · May 7th, 2010, 10:22 AM

Quote:

Originally Posted by Momaru

You might consider cutting the guy some slack. His home is a freakin' battleground, people gettin KILLED out there and you're getting cheesed off about slow shipping for a motorcycle part? Not to mention even if it had shipped on time, there's a fair chance you still wouldn't have gotten it by now. International shipping takes time, lots of time. Not trying to start a ruckus, just suggesting some perspective.

Business is business

refunded

ThaiNinjaRR · May 7th, 2010, 10:45 AM

i am gonna refund this guy,
as i mentioned to him in an email (that he has not posted)
i miss took him for another new buyer. his pack did actually go out as originaly stated..
i even offered to Express him anther one on monday,
He said no. what can you do...i will just refund him

i only try to help everyone the best i can.. but when faced with people who are unwilling to understand.. what can you do.

i will just refund him, and hope that will make him happy.

ThaiNinjaRR · May 7th, 2010, 10:50 AM

Regarding Shipping on these fenders..
i will no longer send these via Airmail. only 3-5days EMS. ($23)
Sorry guys, i dont want to have to face people getting mad at me cos of the Slow post times..
Better to have shipping where you can just check it online direct.

Its $8 more, but its worth the Peice of mind for everyone.

gixerhp · May 14th, 2010, 02:41 AM

Do offer this item with smaller turn signal hole, for the reason i would be use aftermarket turn signals?

ThaiNinjaRR · May 14th, 2010, 03:02 AM

you can fit aftermartket is cool..

but how small to you mean?

if you insert with the OEM rubber under the New aftermarket one, then you have a really small whole (if that makes sense)

or, i can just have one sent that the hole has not been cut, and you cut your self?

gixerhp · May 14th, 2010, 03:21 AM

Quote:

Originally Posted by ThaiNinjaRR

you can fit aftermartket is cool..

but how small to you mean?

if you insert with the OEM rubber under the New aftermarket one, then you have a really small whole (if that makes sense)

or, i can just have one sent that the hole has not been cut, and you cut your self?

An uncut one would be great, What do take for payments?

ThaiNinjaRR · May 14th, 2010, 03:24 AM

Quote:

Originally Posted by gixerhp

An uncut one would be great, What do take for payments?

ok i will have one made so you can cut the hole yourself...

i take paypal is fine.

i'll PM you

wvninja · June 7th, 2010, 08:31 AM

Quote:

Originally Posted by ThaiNinjaRR

i am gonna refund this guy,
as i mentioned to him in an email (that he has not posted)
i miss took him for another new buyer. his pack did actually go out as originaly stated..i even offered to Express him anther one on monday,
He said no. what can you do...i will just refund him

i only try to help everyone the best i can.. but when faced with people who are unwilling to understand.. what can you do.

i will just refund him, and hope that will make him happy.

I'm not one to beat a dead horse but still didn't get this thing. I'm guessing it was conveniently lost in the mail or never sent in the first place. This has been over a month since it was "supposedly" sent out. I would've paid the guy if I had actually got it.

So has anyone else actually got these since?

Plasmatoast · June 7th, 2010, 09:34 AM

yea ive been waiting for mine, from the begining of april. .. ..

March 6th, 2010, 08:44 AM	#1
ThaiNinjaRR ninjette.org member Name: ThaiNinjaRR Location: Bangkok Join Date: Jan 2010 Motorcycle(s): 2010 Ninja 250R - 2009 Ninja ZX6 Posts: 230	SHINTO: Full Fender Eliminator This is SHINTO's Full Fender Eliminator, with Removable Plate Holder. This is made from Fibre Glass (Carbon Fibre Available upon Special Request) This is a Full Cover, it totaly surrounds and covers the Tail light as one piece. There are mount holes for your Rear indicator lights should you need. And plate holes for your plate. The Full cover can detatch from the lower part, should you not want to use it. The Price for this is: $70 Here is a pic of the Item on a bike. (Look Carefullyat the tail) Some more pics:

March 8th, 2010, 07:52 PM	#9
ThaiNinjaRR ninjette.org member Name: ThaiNinjaRR Location: Bangkok Join Date: Jan 2010 Motorcycle(s): 2010 Ninja 250R - 2009 Ninja ZX6 Posts: 230	Shipping updated ######SHIPPING UPDATE####### Ok just back from the post office. Here is a new Shipping costs for the Fender Eliminator DPEX: 2-3 Days = $45 (Full Door to Door Tracking + Insurence) EMS: 4-6 Days = $23 (Full Door to Door Tracking + Insurence) EMS: 7-10 Days = $13 (Partial Tracking - Just Shipped and Recieved Notice+Insurence) EMS: 14-20 Days = $8 (Partial Tracking - Just Shipped and Recieved Notice+Insurence) The DPEX is Guaranteed date, The EMS is Estimated. i was very to hear these shipping prices. i know the DPEX that i like to use for huggers is a bit off putting..(but i know no its not needed for smaller items.) Last futzed with by ThaiNinjaRR; March 9th, 2010 at 02:55 AM.

March 10th, 2010, 01:52 AM	#12
maglin ninjette.org member Name: xaris Location: greece Join Date: Aug 2009 Motorcycle(s): what else? Posts: 121	Hi! Can you tell me if is possible to keep the metal brackets that originally holds the indicators? __________________________________________________ -This signature rocks!!!

April 21st, 2010, 08:27 AM	#28
wvninja ninjette.org sage Name: Nate Location: west virginia Join Date: Apr 2010 Motorcycle(s): 2009 Honda CBR600RR Posts: 633	Just bought one a few days ago from him. Waiting to get it. __________________________________________________ "Riding a motorcycle is like playing sports, not everyone is cut out for it." - WVNinja Last futzed with by wvninja; May 7th, 2010 at 09:53 AM.

May 7th, 2010, 09:51 AM	#30
wvninja ninjette.org sage Name: Nate Location: west virginia Join Date: Apr 2010 Motorcycle(s): 2009 Honda CBR600RR Posts: 633	Buyer Beware awaiting a full refund now __________________________________________________ "Riding a motorcycle is like playing sports, not everyone is cut out for it." - WVNinja

March 6th, 2010, 09:39 AM	#2
JokerSeven Ride it like you stole it Name: Jeremy Location: Bama Join Date: Jan 2010 Motorcycle(s): '09 Ninja 250R, '04 R6(sold) Posts: 362	Very nice, very tempting. I like ! I would like to see more pics of it on the bike.

March 6th, 2010, 10:22 AM	#4
JokerSeven Ride it like you stole it Name: Jeremy Location: Bama Join Date: Jan 2010 Motorcycle(s): '09 Ninja 250R, '04 R6(sold) Posts: 362	Thats fine, I just want to see some closer pics on the final fit and overall look. Its hard to see much on that one pic because of shadows. I assume these are shipping from Thailand, what is the shipping cost to the US ?

March 6th, 2010, 03:05 PM	#5
jonthechron ninjette.org sage Name: Jon Location: Usa Join Date: Jan 2010 Motorcycle(s): magHitVE Posts: 649	I'm looking to buy a fender eliminator, and so far, this one is one of the best I've seen. But i would want to see a few more pics before I decide. Thanks, Jon

March 7th, 2010, 04:26 AM	#8
ThaiNinjaRR ninjette.org member Name: ThaiNinjaRR Location: Bangkok Join Date: Jan 2010 Motorcycle(s): 2010 Ninja 250R - 2009 Ninja ZX6 Posts: 230	Ok guys, just took a few pics from a customers bike.. have a look. He had it sprayed Glossy blak..

March 9th, 2010, 03:26 AM	#10
CZroe CPT Falcon Name: J.Emmett Turner Location: Newnan, GA Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.	I'd like to see a way to bring those lobster-eye turn signals together just a bit. They stick out entirely too far (DOT spec, but who cares, right? ) and it is even more obvious with a fender eliminator. Of course, you can always switch to new signals, but I've seen good results without doing that.

March 10th, 2010, 07:35 AM	#13
jonthechron ninjette.org sage Name: Jon Location: Usa Join Date: Jan 2010 Motorcycle(s): magHitVE Posts: 649	Don't forget to mention a minimum 8$ handling fee + local taxes! so 70 = 95?

March 19th, 2010, 06:18 AM	#16
riiken Late Bloomer Name: Brian Location: Twin Cities, MN Join Date: Sep 2009 Motorcycle(s): Bikes-less :( Posts: 37	If I buy multiple items from you, could I save on shipping?

March 22nd, 2010, 08:25 PM	#18
aholeinthewor1d ninjette.org member Name: jon Location: pa Join Date: Mar 2010 Motorcycle(s): 2009 ninja 250r (black) Posts: 20	i am def interested in ordering one of these...all of the ones ive seen where they fit around the tail light and u dont have to cut the stock fender..every one people said how they dont fit good and there would be gap on the sides of the piece and the tail light...i want to make sure this is a really nice good fit so it looks like it was made that way..let me know..maybe some more pictures?

March 22nd, 2010, 08:43 PM	#19
ThaiNinjaRR ninjette.org member Name: ThaiNinjaRR Location: Bangkok Join Date: Jan 2010 Motorcycle(s): 2010 Ninja 250R - 2009 Ninja ZX6 Posts: 230	please refere to the many pics i have displayed above.

March 23rd, 2010, 06:17 PM	#20
aholeinthewor1d ninjette.org member Name: jon Location: pa Join Date: Mar 2010 Motorcycle(s): 2009 ninja 250r (black) Posts: 20	has anyone tried one of theses yet? looks awsome just want to hear how it fits....also does it just come plain and you have to paint it black urself?

March 23rd, 2010, 06:33 PM	#21
ThaiNinjaRR ninjette.org member Name: ThaiNinjaRR Location: Bangkok Join Date: Jan 2010 Motorcycle(s): 2010 Ninja 250R - 2009 Ninja ZX6 Posts: 230	The FE comes in Matt, as shown in the orignal pic... You can of course paint it yourself. or i do offer Automobile Grade Spray service. (aprx$15) if your interested, feel free to PM me! Cheers

April 6th, 2010, 07:21 PM	#22
petiteninja ninjette.org member Name: LMG Location: nyc Join Date: Aug 2009 Motorcycle(s): '09 Ninja EX250J Posts: 177	did you get my email earlier?

April 17th, 2010, 04:20 PM	#25
Scott1620 ninjette.org member Name: Scott Location: Delaware Join Date: Jul 2009 Motorcycle(s): 2008 Ninja 250r(sold), 2007 650R (sold), 2013 Ninja 300 Posts: 199	I just posted a review & installation thread for this fender elim in the farkles section here.

April 21st, 2010, 05:24 AM	#26
2010ninja ninjette.org newbie Name: Mike Location: Adelaide Join Date: Apr 2010 Motorcycle(s): 2010 250 Ninja Posts: 2	im in adelaide mate, how would i go about getting 1?

May 7th, 2010, 10:19 AM	#31
Momaru ninjette.org certified postwhore Name: Paul Location: Roanoke, VA Join Date: Jun 2009 Motorcycle(s): 2008 Candy Plasma Blue 250R Posts: A lot.	You might consider cutting the guy some slack. His home is a freakin' battleground, people gettin KILLED out there and you're getting cheesed off about slow shipping for a motorcycle part? Not to mention even if it had shipped on time, there's a fair chance you still wouldn't have gotten it by now. International shipping takes time, lots of time. Not trying to start a ruckus, just suggesting some perspective. __________________________________________________ Proud member of the Blue Army

May 7th, 2010, 10:45 AM	#33
ThaiNinjaRR ninjette.org member Name: ThaiNinjaRR Location: Bangkok Join Date: Jan 2010 Motorcycle(s): 2010 Ninja 250R - 2009 Ninja ZX6 Posts: 230	i am gonna refund this guy, as i mentioned to him in an email (that he has not posted) i miss took him for another new buyer. his pack did actually go out as originaly stated.. i even offered to Express him anther one on monday, He said no. what can you do...i will just refund him i only try to help everyone the best i can.. but when faced with people who are unwilling to understand.. what can you do. i will just refund him, and hope that will make him happy. Last futzed with by ThaiNinjaRR; May 7th, 2010 at 10:48 AM. Reason: Cos i cant spell

May 7th, 2010, 10:50 AM	#34
ThaiNinjaRR ninjette.org member Name: ThaiNinjaRR Location: Bangkok Join Date: Jan 2010 Motorcycle(s): 2010 Ninja 250R - 2009 Ninja ZX6 Posts: 230	Regarding Shipping on these fenders.. i will no longer send these via Airmail. only 3-5days EMS. ($23) Sorry guys, i dont want to have to face people getting mad at me cos of the Slow post times.. Better to have shipping where you can just check it online direct. Its $8 more, but its worth the Peice of mind for everyone.

May 14th, 2010, 02:41 AM	#35
gixerhp ninjette.org member Name: John Location: Nashua NH Join Date: May 2010 Motorcycle(s): 2004 Hayabusa, 2008 Ninja 250r Posts: 16	Do offer this item with smaller turn signal hole, for the reason i would be use aftermarket turn signals?

May 14th, 2010, 03:02 AM	#36
ThaiNinjaRR ninjette.org member Name: ThaiNinjaRR Location: Bangkok Join Date: Jan 2010 Motorcycle(s): 2010 Ninja 250R - 2009 Ninja ZX6 Posts: 230	you can fit aftermartket is cool.. but how small to you mean? if you insert with the OEM rubber under the New aftermarket one, then you have a really small whole (if that makes sense) or, i can just have one sent that the hole has not been cut, and you cut your self?

June 7th, 2010, 09:34 AM	#40
Plasmatoast ninjette.org member Name: Ryan Location: Augusta Me Join Date: Dec 2008 Motorcycle(s): 09 250R - 08 250R - 03 250EX - 86 KLR 250 Posts: 60	yea ive been waiting for mine, from the begining of april. .. ..

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help! Rear fender replacement (not fender eliminator)	mcnuggett	General Motorcycling Discussion	7	April 30th, 2012 08:24 PM
SHINTO: Full Hugger for Ninja 250r 08-10	ThaiNinjaRR	Motorcycle-related	5	December 12th, 2010 04:11 AM
WTB: Left tail fairing, fender eliminator, and full exhaust	BuckyNaked	Items Wanted	0	August 29th, 2010 10:27 AM
Group buy Shinto fender eliminator	sherjay	Motorcycle-related	10	July 21st, 2010 04:58 PM
Shinto Fender eliminator Review & Installation	Scott1620	2008 - 2012 Ninja 250R Farkles	13	July 16th, 2010 10:12 AM