May 5th, 2012, 02:38 PM | #1 |
ninjette.org member
Name: Elias
Location: Denmark
Join Date: Nov 2011 Motorcycle(s): Ninja 250r Posts: 152
|
My new Blinkers have 3 wires
Hi there! I got some new blinkers after my crash since the old one broke.
But they got 3 new wires, (+/- and ground?) They look like this: Then it would be: RED = (+) | Black = (-) | White/Black = Ground Am i right so far? Now the plan was to cut the old wire and then use an Soldering iron to connect new and old +/- so i easy can connect it with the clip-on mechanism, but what do i do with the ground? (if it is ground). Could i just leave it hanging? thx. Btw the ninja blinker wire has a green and black/yellow wire. Is green for positive (+) and black/yellow for negative (-)? |
|
May 5th, 2012, 04:04 PM | #2 |
ninjette.org member
Name: peter
Location: guelph
Join Date: Oct 2011 Motorcycle(s): ninja 250r Posts: 24
|
look in the instructions that came with the blinker
|
|
May 5th, 2012, 04:14 PM | #3 |
ninjette.org member
Name: Elias
Location: Denmark
Join Date: Nov 2011 Motorcycle(s): Ninja 250r Posts: 152
|
|
|
May 6th, 2012, 09:58 AM | #4 |
ninjette.org member
Name: Canada
Location: Duncan, B.C. Canada
Join Date: Jul 2011 Motorcycle(s): 2010 Ninja 250r Posts: 80
|
is one wire for a running light?
__________________________________________________
2010 Ninja 250 Danmoto Carbon Slip On,Factory Pro Jet Kit,K&N R-0990 Air Filter,10000K HID's,Carbon Fiber Shogun No Cut Frame Sliders & Swingarm Spools,SSR Lowering Links and more.... |
|
May 6th, 2012, 10:03 AM | #5 |
ninjette.org member
Name: Keven
Location: San Diego
Join Date: Sep 2010 Motorcycle(s): 2008 250 Green, 00 R6 Posts: 160
|
|
|
May 6th, 2012, 08:30 PM | #6 |
ninjette.org member
Name: Ian
Location: Vancouver, WA
Join Date: Apr 2011 Motorcycle(s): 2007 Ninja 250 Posts: 11
|
Negative and ground are the same thing, in this, and many cases, anyway. Likely one wire goes to a dimmer filament for a marker light, a brighter filament for a turn signal, and the third wire is ground/negative.
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
too many wires on the battery | eddiekay | 2013 - 2017 Ninja 300 Tech Talk | 5 | May 12th, 2014 08:07 PM |
What are these wires for? | djjontran | 1986 - 2007 Ninja 250R Tech Talk | 8 | July 3rd, 2013 12:01 PM |
help me map gauge wires into harness wires | Kangxi | 2008 - 2012 Ninja 250R Tech Talk | 9 | April 18th, 2012 06:08 PM |
Unsheathed wires? | arcman | 2008 - 2012 Ninja 250R Tech Talk | 5 | November 24th, 2010 07:58 AM |
Unconnected wires | jola | 1986 - 2007 Ninja 250R Tech Talk | 12 | July 10th, 2009 07:23 AM |
|
|