September 26th, 2012, 11:10 AM | #1 |
time is running out....
Name: jesse
Location: the land of corn
Join Date: Sep 2012 Motorcycle(s): pregen ninjari Posts: 412
Blog Entries: 3
|
do i use the stock exhaust gaskets with areap exhuast?
oem flange/gasket doesnt even fit now.
i hav gotten pregen areap full exhaust. thanx edit. i take it they go on this heaw?
__________________________________________________
The King |
|
September 26th, 2012, 11:57 AM | #2 |
ninjette.org certified postwhore
Name: .
Location: .
Join Date: Feb 2011 Motorcycle(s): . Posts: Too much.
MOTM - Feb '13, Feb '14
|
Don't use the oem flange. Toss every part of your oem system actually
The AP system just sits right up on the exhaust side of the engine and seals like that. Be careful to not massively over-torque the nuts onto the engine like the PO of my Muzzy did, or else those two bolt bracket things will bend a little. |
|
September 26th, 2012, 12:37 PM | #3 |
time is running out....
Name: jesse
Location: the land of corn
Join Date: Sep 2012 Motorcycle(s): pregen ninjari Posts: 412
Blog Entries: 3
|
ya they had a slight bend then i stopped. my brake pedal hit it until i bled the brakes now they dont hit. had to gheto fab a bracket for now
__________________________________________________
The King |
|
September 27th, 2012, 10:34 AM | #4 |
Smoker
Name: Bob
Location: SoCal
Join Date: Dec 2010 Motorcycle(s): Guess.... Posts: 556
|
No, you don't reuse the flanges.
Yes, you need new exhaust crush gaskets. |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
AreaP Exhaust on the way, Port Gaskets? | Jason5885 | 2008 - 2012 Ninja 250R Tech Talk | 3 | December 4th, 2014 03:49 AM |
Removing AreaP w/o returning to stock jets -- what wil happen? | adouglas | 2008 - 2012 Ninja 250R Tech Talk | 7 | March 8th, 2013 03:38 PM |
Which AreaP exhaust? | GeneJunkie | 2008 - 2012 Ninja 250R Tech Talk | 19 | August 17th, 2010 02:31 PM |
|
|