![]() |
![]() |
#1 |
ninjette.org guru
Name: Dave
Location: Pittsburgh
Join Date: Oct 2011 Motorcycle(s): 2004 Ninja 250F Posts: 308
|
"Reduced Head" Flange Bolts?
Does anyone know where to purchase "reduced head" style flange bolts, as used on the motor? Preferably with black oxide coating. The flange on most bolts I can find is too large to fit in the counterbored holes.
|
![]() |
![]() |
![]() |
#3 |
wat
Name: wat
Location: tustin/long beach
Join Date: Sep 2009 Motorcycle(s): wat Posts: Too much.
Blog Entries: 5
MOTM - Oct '12, Feb '14
|
http://www.mcmaster.com/#flange-head...screws/=wku4tx
http://www.mcmaster.com/#hex-head-fl...screws/=wku4z2
__________________________________________________
![]() ![]() ![]() |
![]() |
![]() |
![]() |
#5 |
ninjette.org guru
Name: Dave
Location: Pittsburgh
Join Date: Oct 2011 Motorcycle(s): 2004 Ninja 250F Posts: 308
|
Flange is too big. For the OEM M6 bolts, the head size is 8mm and the flange is 10.7mm. The bolts from McMaster have a head size of 10mm and a flange size of 14.2mm. The socket cap ones are better (12.5mm) but are still larger than I'd like. Plus then only the replacement bolts have socket heads...
I've checked McMaster, MSC, Grainger, and a few other places. Can't seem to find them anywhere. |
![]() |
![]() |
![]() |
#6 |
wat
Name: wat
Location: tustin/long beach
Join Date: Sep 2009 Motorcycle(s): wat Posts: Too much.
Blog Entries: 5
MOTM - Oct '12, Feb '14
|
http://www.bikebandit.com/oem-parts/...8685#sch706569
132A: BOLT-FLANGED-SMALL,6X 1792929 of course that is a specific size for a specific app. find the exact ones you are going to replace
__________________________________________________
![]() ![]() ![]() |
![]() |
![]() |
![]() |
#7 |
Rev Limiter
Name: Jay
Location: WI
Join Date: Jul 2013 Motorcycle(s): '06 SV650n, '00 Derbi GPR, '64 CA77 Dream 305, '70 CL450 Scrambler, numerous dirt bikes Posts: A lot.
MOTM - Jun '18, Oct '16
|
Why not just get the original bolts from Kawasaki?
|
![]() |
![]() |
![]() |
#8 |
ninjette.org guru
Name: Dave
Location: Pittsburgh
Join Date: Oct 2011 Motorcycle(s): 2004 Ninja 250F Posts: 308
|
|
![]() |
![]() |
![]() |
#9 |
wat
Name: wat
Location: tustin/long beach
Join Date: Sep 2009 Motorcycle(s): wat Posts: Too much.
Blog Entries: 5
MOTM - Oct '12, Feb '14
|
you could just get the larger flanged generic bolts and grind them down. you'll need to redo the black oxide where you ground but that's pretty easy. also, they're martensitic so go very slow and keep them cool if you don't plan on redoing the heat treatment.
__________________________________________________
![]() ![]() ![]() |
![]() |
![]() |
![]() |
#10 |
Rev Limiter
Name: Jay
Location: WI
Join Date: Jul 2013 Motorcycle(s): '06 SV650n, '00 Derbi GPR, '64 CA77 Dream 305, '70 CL450 Scrambler, numerous dirt bikes Posts: A lot.
MOTM - Jun '18, Oct '16
|
|
![]() |
![]() |
![]() |
#11 | |
ninjette.org guru
Name: Dave
Location: Pittsburgh
Join Date: Oct 2011 Motorcycle(s): 2004 Ninja 250F Posts: 308
|
Quote:
![]() I was just looking to have some spares on-hand. A handful of each size/length would be plenty. The ones Alex linked to on McMaster are $0.11 each in a 100 ct. package and are class 10.9. |
|
![]() |
![]() |
![]() |
#12 | |
Daily Ninjette rider
Name: Hernan
Location: Florida
Join Date: Mar 2011 Motorcycle(s): 2007 Ninja 250 Posts: A lot.
MOTY - 2016, MOTM - Dec '12, Jan '14, Jan '15, May '16
|
![]() Quote:
These bolts meet the old JIS specification. They have smaller heads than ISO Metric bolts. The tensile strength JIS and ISO Metric equivalence is as follows: JIS mark----------------------ISO metric mark 4 or 4T---------------------------4.6~4.8 5 or 5T---------------------------5.6~5.8 6 or 6T------------------------------6.8 7 or 7T------------------------------8.8 8 or 8T------------------------------8.8 10 or 10T--------------------------10.9
__________________________________________________
Motofool ![]() .................................Never ride faster than your guardian angel can fly "Mankind is composed of two sorts of men — those who love and create, and those who hate and destroy. Love is the bond between men, the way to teach and the center of the world." - José Martí |
|
![]() |
![]() 1 out of 1 members found this post helpful. |
![]() |
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
[roadracingworld.com] - Bob Weaver Yamaha Wins Star Motorcycles "Battle Of The Bolts" | Ninjette Newsbot | Motorcycling News | 0 | February 28th, 2015 09:10 AM |
[roadracingworld.com] - Ducati's Dovizioso: "For Sure We Have Reduced The Gap To The | Ninjette Newsbot | Motorcycling News | 0 | March 18th, 2014 03:00 PM |
[topix.net] - "The Fonz", "Ralph Malph" & "Potsie" are giving away Fonzie's motorcycl | Ninjette Newsbot | Motorcycling News | 0 | August 16th, 2012 04:30 PM |
ANOTHER "emergency" - cam cap bolts | headshrink | 2008 - 2012 Ninja 250R Tech Talk | 7 | March 6th, 2011 01:08 AM |
[visordown.com] - BMW: "We are going to take the Japanese head-on" | Ninjette Newsbot | Motorcycling News | 0 | August 7th, 2009 03:00 PM |
|
|