February 21st, 2015, 04:03 PM | #1 |
ninjette.org member
Name: Jean
Location: Toronto Ontario Eh!
Join Date: Jun 2013 Motorcycle(s): Red 2012 Ninja 250 Posts: 57
|
How boned am I?
Was trying remove the front cowl of my 250 so I can get at the headlight assembly since I am going to be putting in a BK Moto HID kit.
Found the one screw that was tightened by the hand of Thor. How boned am I? |
|
February 21st, 2015, 04:10 PM | #2 |
ninjette.org certified postwhore
Name: Rick
Location: Alexandria, Louisiana
Join Date: Jan 2009 Motorcycle(s): 05 Blue Ninja 250 Posts: Too much.
MOTY - 2017, MOTM - Jan '19, Oct '16, May '14
|
You need to go to the hardware or home improvement store and buy screw extracting kit. iIt contains a set of bits that "bite" into the stripped screw head as you turn it.
|
|
February 21st, 2015, 04:12 PM | #3 |
Private Joker
Name: Ben
Location: Towson, MD
Join Date: Nov 2012 Motorcycle(s): '99/'01 Ninja 250 "sketchy", '13 Ninja 300 "yoshi", '03 GSXR 600 "merlin" Posts: A lot.
MOTM - Mar '14
|
take the allen wrench
put the allen wrench in the bolt, put some silicone sealant on it to get more grip. Let it harden and then apply some wd-40 or other lubricant to the inside of the bolt to help loosen it up. Try to remove it then. If that doesn't work find a drill, drill into it and use a vise grip to unscrew it. Regardless of the option you go with, replace the damn thing when you're done
__________________________________________________
I see you over there seeing me, do you see the me I think you see? |
|
February 21st, 2015, 07:46 PM | #4 |
ninjette.org guru
Name: Jacob
Location: Stockton, CA
Join Date: Dec 2013 Motorcycle(s): 2011 250R SE Posts: 326
|
|
|
February 21st, 2015, 07:49 PM | #5 |
Private Joker
Name: Ben
Location: Towson, MD
Join Date: Nov 2012 Motorcycle(s): '99/'01 Ninja 250 "sketchy", '13 Ninja 300 "yoshi", '03 GSXR 600 "merlin" Posts: A lot.
MOTM - Mar '14
|
I like the silicone more though, easier to remove when you're done. The downside is it can tear easily if you don't let it sit long enough
__________________________________________________
I see you over there seeing me, do you see the me I think you see? |
|
February 21st, 2015, 08:19 PM | #6 |
ninjette.org member
Name: Jean
Location: Toronto Ontario Eh!
Join Date: Jun 2013 Motorcycle(s): Red 2012 Ninja 250 Posts: 57
|
Snake's answer got my noodle going and I got it off using a Torx screwdriver WOO!
Sidenote it also comes off easier if you turn it in the right direction |
|
February 21st, 2015, 08:43 PM | #7 |
Private Joker
Name: Ben
Location: Towson, MD
Join Date: Nov 2012 Motorcycle(s): '99/'01 Ninja 250 "sketchy", '13 Ninja 300 "yoshi", '03 GSXR 600 "merlin" Posts: A lot.
MOTM - Mar '14
|
^That would explain how you destroyed it in the first place
__________________________________________________
I see you over there seeing me, do you see the me I think you see? |
|
February 21st, 2015, 08:56 PM | #8 |
in your machine
Name: Scott
Location: Summer Shade, Ky.
Join Date: Oct 2014 Motorcycle(s): 98 Ninja 250/F12 aka ZX-2R "SERENITY", 91 Ninja 500/A5 aka ZX-5R "Phoenix", 84 Honda GL1200A "SIREN" Posts: A lot.
Blog Entries: 25
MOTM - Jun '17, May '16, Mar '15
|
Take dremmel with cutting wheel, make a slot for a flat head screwdriver.
lefty loosey, righty tighty you might want to write that down somewhere. J/K And don't let this guy near your bike AGAIN!!!!
__________________________________________________
violente et ignorantia ZX-2R BLOG Twitter and Instagram = Ghostt_Scott I'm not here to change your mind, just to inform. |
1 out of 1 members found this post helpful. |
February 21st, 2015, 09:14 PM | #9 | |
ninjette.org member
Name: Jean
Location: Toronto Ontario Eh!
Join Date: Jun 2013 Motorcycle(s): Red 2012 Ninja 250 Posts: 57
|
Quote:
completely ****ed up on. I wonder if my mechanic would be annoyed if I gave him the bike like this. |
|
|
February 21st, 2015, 11:49 PM | #10 | |
in your machine
Name: Scott
Location: Summer Shade, Ky.
Join Date: Oct 2014 Motorcycle(s): 98 Ninja 250/F12 aka ZX-2R "SERENITY", 91 Ninja 500/A5 aka ZX-5R "Phoenix", 84 Honda GL1200A "SIREN" Posts: A lot.
Blog Entries: 25
MOTM - Jun '17, May '16, Mar '15
|
Quote:
Or I'll give you $200 USD for it, I like projects Meet Lazarus, and Serenity
__________________________________________________
violente et ignorantia ZX-2R BLOG Twitter and Instagram = Ghostt_Scott I'm not here to change your mind, just to inform. |
|
|
February 22nd, 2015, 12:28 AM | #11 |
ninjette.org member
Name: Jean
Location: Toronto Ontario Eh!
Join Date: Jun 2013 Motorcycle(s): Red 2012 Ninja 250 Posts: 57
|
Yeah, not gonna happen, only reason she's like that right now is that I've ordered a bunch of toys for her, putting in some HID's and a koso gauge. trying to save a bit of money by putting those in myself, I'll let the mechanic handle the dirty jobs though.
|
|
February 22nd, 2015, 09:07 AM | #12 | |
in your machine
Name: Scott
Location: Summer Shade, Ky.
Join Date: Oct 2014 Motorcycle(s): 98 Ninja 250/F12 aka ZX-2R "SERENITY", 91 Ninja 500/A5 aka ZX-5R "Phoenix", 84 Honda GL1200A "SIREN" Posts: A lot.
Blog Entries: 25
MOTM - Jun '17, May '16, Mar '15
|
Quote:
I hear ya, but you should reconsider my offer, that $200.00 USD, that's like a few million in CAD... RIGHT?
__________________________________________________
violente et ignorantia ZX-2R BLOG Twitter and Instagram = Ghostt_Scott I'm not here to change your mind, just to inform. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Rider T-boned by car. | cadd | Videos | 3 | November 19th, 2014 05:08 PM |
T-boned a Bicyclist | nycsteve | !%@*#$%!)@#&!%@ I crashed! | 96 | March 27th, 2014 08:48 PM |
T-boned a car | robertkh100 | !%@*#$%!)@#&!%@ I crashed! | 44 | July 18th, 2012 06:35 AM |
[superbikeplanet.com] - Demolition Daytona: EBoz Gets T-Boned By Ghost-Bike | Ninjette Newsbot | Motorcycling News | 0 | March 12th, 2011 08:40 AM |
|
|