|
July 27th, 2012, 12:09 PM
|
#1 |
|
ninjette.org member
Name: Tyler
Location: CT
Join Date: Jul 2012 Motorcycle(s): 2009 Ninja 250 Posts: 18
|
Opinions on turn signal mounting
I bought my 250 used with a fender eliminator kit already installed. I didn't like how the PO had the turn signals mounted so I made up different brackets for them. However, I can mount them two ways. This is where i need your opinions.
The first way:   If i flip the brackets 180 degrees:   I think I like the second way because it tucks them in tighter under the tail. My only concern with it is that they will be too close together and may be a safety issue. Thoughts? (PS - those pictures are just a mock up. The brackets will be painted and i know everything is all crooked  )
|
|
|
|
July 27th, 2012, 12:29 PM
|
#2 |
|
ninjette.org member
Name: RUDY
Location: AZ
Join Date: May 2012 Motorcycle(s): 2012 NINJA 250R Posts: 32
|
some states require a certain distance between the signals might wanna check before you mount them. call up your local DMV
|
|
|
|
|
July 27th, 2012, 12:58 PM
|
#3 |
|
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
The difference is so small I can't tell much difference either way. Rock what you like that is legal.
__________________________________________________
Goal: Shake A Million Hands | Look through the corners | Track Day Prep | Closest track? | The Mid-Ohio School |
|
|
|
 |
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Looking for 09 oem rear turn signal and front turn signals and tail fairings | mbbernas | Items Wanted | 1 | September 11th, 2013 10:48 AM |
| Looking for pregen left front turn signal and mounting parts | tanghonglai | Items Wanted | 3 | August 4th, 2013 04:44 PM |
| Turn Signal issue, looking for opinions | ArsnlTim | 2008 - 2012 Ninja 250R Tech Talk | 14 | August 2nd, 2013 02:47 PM |
| Turn signal mounting plate replacing...HELP | rph12 | 1986 - 2007 Ninja 250R Tech Talk | 5 | March 8th, 2012 09:48 PM |
| mounting turn signals | bhalv | 1986 - 2007 Ninja 250R Farkles | 4 | October 14th, 2010 01:15 PM |
|
|
