April 10th, 2014, 03:40 PM | #1 |
ninjette.org newbie
Name: Mike
Location: Augusta GA
Join Date: Apr 2014 Motorcycle(s): 09 Ninja 250 Posts: 3
|
Where do these vacuum hoses go?
Huge story on my bike but tl;dr version:
Would idle but die immediately upon gas when in gear, or you could rev it very high and take off but it would stall soon thereafter. Happened after bike sat for awhile. Cleaned carbs thoroughly, installed new petcock, new oil and filter, new air filter. Now trying to re-assemble everything and have this random hose that is T'd hanging and I'm not sure where the two ends go! These are located under the gas tank on the unit where the hose from the intake box is running to. (Please ignore the quality of the pics and the dirtiness of the bike lol) Thanks for any help! |
|
April 10th, 2014, 06:08 PM | #2 |
Fix It Till Ya Break It
Name: Asspyre
Location: T.Dot
Join Date: Oct 2011 Motorcycle(s): 08 250RRrrrr Posts: 623
|
First pic, Kleen air system. Ignore it.
second pic: one hose goes to carb, second goes to fuel petcock. |
|
April 11th, 2014, 03:42 AM | #3 |
ninjette.org newbie
Name: Mike
Location: Augusta GA
Join Date: Apr 2014 Motorcycle(s): 09 Ninja 250 Posts: 3
|
Thank you. I knew I was missing the petcock/carb hose but I didn't realize it was separate and t'd off from there.
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
What are these airbox hoses for? | Braden07 | 2008 - 2012 Ninja 250R Tech Talk | 5 | February 1st, 2015 06:40 PM |
Colored hoses? | nickjpass | General Motorcycling Discussion | 9 | June 18th, 2014 07:03 PM |
Help with new bike - vacuum hoses | eric78 | 1986 - 2007 Ninja 250R Tech Talk | 1 | May 7th, 2014 09:16 PM |
TIP: How to keep track of loose vacuum hoses and wires during a DIY. | Army Aviator | 2008 - 2012 Ninja 250R Tech Talk | 8 | March 31st, 2012 08:08 PM |
Need help with vacuum hoses | Jordan91 | 2008 - 2012 Ninja 250R Tech Talk | 1 | December 25th, 2010 09:57 PM |
|
|