Koso gauge & gear Indicator install

randomwalk101 · February 19th, 2011, 10:53 PM

Just got done installing the long waited Koso gauge & gear indic. Gear indicator was bought here in US. Koso gauge was from Shito Paul...I was one of the lucky ones to get something...he still owe me a custom face plate and somehow I have a feeling I'll never get it. Have not test or setup yet. Will do tomorrow

randomwalk101 · February 19th, 2011, 11:18 PM

I'm reading the instruction to set this thing up. Is our bike 4 strokes and 2 pistons?

sherjay · February 20th, 2011, 12:26 AM

That looks bad a$$. Hope you get it all set up. Ive been wanting one. Pricey, but I have a feeling it's all worth it

randomwalk101 · February 20th, 2011, 10:12 AM

okay I set up the Koso gauge and everything is working except the gear indicator. I guess is it because I use a diff brand of gear indicator or is it because I set up wrong? Hmm..

Our engine is 4 stroke cycles/2 pistons correct?

I also use the Daytona water temp sensor instead of the provided Koso water temp sensor...and it only displays 80F temp...not sure if it's the weather or the sensor are incompatible..I need to swap them out to find out I guess. oil temp displays around 120F or so at that time. Fuel gauge works...kind of fluctuate all over the place.. I need to adjust the resistance...what value of resistance did you guys use?

k-os · February 20th, 2011, 10:32 PM

Quote:

Originally Posted by randomwalk101

Our engine is 4 stroke cycles/2 pistons correct?

Yes.

February 19th, 2011, 10:53 PM	#1
randomwalk101 self wrencher Name: john Location: houston Join Date: Dec 2008 Motorcycle(s): 08 250r and 07 600r Posts: A lot.	Koso gauge & gear Indicator install Just got done installing the long waited Koso gauge & gear indic. Gear indicator was bought here in US. Koso gauge was from Shito Paul...I was one of the lucky ones to get something...he still owe me a custom face plate and somehow I have a feeling I'll never get it. Have not test or setup yet. Will do tomorrow

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: koso gauge install	dyeforever	2008 - 2012 Ninja 250R Tech Talk	207	March 30th, 2017 03:50 PM
Koso gauge install question	randomwalk101	2008 - 2012 Ninja 250R Tech Talk	6	February 17th, 2012 01:54 PM
Koso gauge and gear indicator confusion	randomwalk101	2008 - 2012 Ninja 250R Tech Talk	49	July 29th, 2011 08:35 AM
DIY for Koso gear indicator? Not listed in the directory.	MotoStrider	2008 - 2012 Ninja 250R Tech Talk	2	July 22nd, 2011 05:06 AM
For the next person to install a Koso gauge cluster...	headshrink	2008 - 2012 Ninja 250R Tech Talk	8	October 26th, 2010 06:25 AM

February 19th, 2011, 11:18 PM	#2
randomwalk101 self wrencher Name: john Location: houston Join Date: Dec 2008 Motorcycle(s): 08 250r and 07 600r Posts: A lot.	I'm reading the instruction to set this thing up. Is our bike 4 strokes and 2 pistons?

February 20th, 2011, 12:26 AM	#3
sherjay ninjette.org member Name: Xtian Location: Artesia, California Join Date: Jun 2010 Motorcycle(s): 2010 Ninja 250r SE Posts: 98	That looks bad a$$. Hope you get it all set up. Ive been wanting one. Pricey, but I have a feeling it's all worth it

February 20th, 2011, 10:12 AM	#4
randomwalk101 self wrencher Name: john Location: houston Join Date: Dec 2008 Motorcycle(s): 08 250r and 07 600r Posts: A lot.	okay I set up the Koso gauge and everything is working except the gear indicator. I guess is it because I use a diff brand of gear indicator or is it because I set up wrong? Hmm.. Our engine is 4 stroke cycles/2 pistons correct? I also use the Daytona water temp sensor instead of the provided Koso water temp sensor...and it only displays 80F temp...not sure if it's the weather or the sensor are incompatible..I need to swap them out to find out I guess. oil temp displays around 120F or so at that time. Fuel gauge works...kind of fluctuate all over the place.. I need to adjust the resistance...what value of resistance did you guys use?