March 20th, 2013, 11:48 PM | #1 |
B-Town Ninja
Name: Nathan
Location: Bloomington, IN
Join Date: Feb 2011 Motorcycle(s): Black 2013 Ninja ZX6R ABS Posts: 609
Blog Entries: 3
|
FS: Red 2010 heavily modified 250r. Bloomington, Indiana
UPDATED PICTURES: it was 20degrees out but I uncovered her and got some updated pictures. I didn't wash it (common, it's 20 degrees out!) but I tried to show everything people asked to see.
I’m selling my red 2010 Ninja 250r with about EDIT: 10.5k miles (I’m still riding it until I sell it, if you want exact numbers, let me know). This is an extremely CUSTOM bike with a ton of time, money, and love put into it. I downgraded to a 2013 ZX6R abs model and don’t have the space to keep this bike too. I’m asking a very modest $3,000 for the bike considering the amount of aftermarket parts and performance tweaks. It’s really a bike best used on the track but is more than capable on the streets. None of the parts listed below were replaced due to OEM failure except for the front turn signals. I did not keep the OEM parts (I either donated or sold them via ninjette.org. The bike was low-sided once when it was around 2,800 miles. I had new tires put on and they slipped causing a less than 10 mile per hour low slide. Absolutely no damage was caused to the bike other than a few scrapes in the right front fairings and a broken front right turn signal (replaced). The only other minor issue (which isn’t applicable to most people) is that the ignition has a tendency to freeze in the winter if you don’t spray some WD-40 in it every couple of weeks. If this is a deal breaker, I have no issues replacing the ignition (only costs about $40 and takes less than an hour). EDIT: Yes, valve clearance was done at around 7k miles. All the normal maintenance in the manual were preformed at the proper time. This bike was taken to the race track multiple times and never crashed (other than low-side mentioned above). I’ve changed the oil after the first 100 miles, 600miles, and then following every 3,000 miles as well as a change before and after winter. I’ve always put in Royal Purple 10w-40 full syth and replaced with K&N oil filters each change. The engine brake-in was done as a hard brake-in to maximize engine life and power. Chain cleaned/adjusted (if needed) every couple of weeks. I’ve kept detailed logs of most the work I’ve done to this bike. I’m only going to try and sell this for a month or so. After that I’d rather part it out then spend more time trying to sell it. This is a real steal if you’re looking for a quick bike with excellent handling and MPG (riding it very hard, I average about 55~60mpg. Babying it, I got up to 81mpg http://www.reddit.com/r/250r/comment...t_her_10_250r/ ). Sale isn’t urgent so if you are interested but need more time, just let me know. I’m willing to work with you if you’re willing to work with me. You can test ride ONLY if the money is in my hand. The only trades I’ll consider are for a dual sport, otherwise cash only. I’m selling bike as is. If you want any specific pictures or information, don’t hesitate to email/text me. I work 3rd shift, so I might be difficult to reach via phone unless you call between 8am-noon or 5pm-midnight. I am the original owner and I bought this bike brand new (paid in full) February 4th, 2011. I have the title in hand. Engine performance: EBC fiber clutch plates (about 5k miles) EBC clutch springs (about 5k miles) K&N Pod filters (airbox delete) Block off plate Factory pro stage 3 jet kit Pit Bull 14/45 sprockets (about 2k miles) EK 520SRX x-ring chain (gold about 2k miles) Sportisi full system race carbon exhaust (dirty) Suspension/comfort: X Race top triple clamp (red 0 miles, never installed) X Race top triple clamp (silver) X Race rear sets (gold) Woodcraft Clip ons Adjustable shorty clutch/brake lever Slingshot preload adjusters (red, never used) Spiegler front brake line (red, never used) Race-tech fork spring kit (setup for street/track at 200lbs) EBC HH front brake pads (about 5k miles) EBC GG rear brake pads (about 5k miles) 120 Pirelli Rosso II front tire (about 2k miles, lots of tread left estimated to be replaced in another 3k miles) 140 Pirelli Rosso II rear tire (about 2k miles, lots of tread left, estimated to be replaced in another 2k miles) Cosmetic: Koso RX-2 GP Guage with custom bracket and Koso Voltmeter Flush Mount LED front turn signals Brake light modulator Yoshimuri fender eliminator CBR250 huger (not yet installed) Zero gravity double bubble Red reflective rim tape (has my youtube channel name on it, so I can remove/clean if you’d like) ZX2R Decals on rear fairings Gran Turismo logo on lower right/left fairings Killzone 3 decal on front windscreen Contact information: Nathan M. Email: bloomingtonninja@gmail.com Phone: (312) 768-8059 Reddit: btownninja Picture album: Note: most of these are taken with cell phone. I am more than happy to take any pictures from any angle that is requested. I’ll update this album over time: 03/27/2013 8:27am: https://picasaweb.google.com/1086274...eat=directlink NINJETTE ONLY MEMBERS: If you've been an active member here, let me know for a 20% discount.
__________________________________________________
Downgraded to a 2013 636. Previous owner of a 2010 250r --------------------------------- My moto-vlog YouTube channel http://www.youtube.com/bloomingtonninja Last futzed with by NathanUc; March 27th, 2013 at 05:44 AM. |
|
March 21st, 2013, 02:24 AM | #2 |
ninjette.org certified postwhore
Name: Hansveer
Location: Bombay, India
Join Date: Jan 2012 Motorcycle(s): Ninja 250r - Track whore, Ninja 300 - SOLD, KTM RC390 - Orange Hulk, Ducati 899 Panigale - Red Devil. Posts: A lot.
|
WOW! That's an awesome bike... GLWS!
|
|
March 21st, 2013, 03:51 AM | #3 |
Fighting Texas Aggie '05
Name: Neil
Location: Hutto, TX
Join Date: Feb 2009 Motorcycle(s): '07 ZX6R, '08 Versys, '09 250R Track, '93 F2/F3 Track Posts: A lot.
|
GLWS
|
|
March 21st, 2013, 10:39 PM | #4 |
B-Town Ninja
Name: Nathan
Location: Bloomington, IN
Join Date: Feb 2011 Motorcycle(s): Black 2013 Ninja ZX6R ABS Posts: 609
Blog Entries: 3
|
Thanks guys. I have a couple people coming to look at it tomorrow; hopefully something works out as it would be extremely nice to sell it this quickly I'd love to use the money for a new exhaust on the 636 (which I won't have for a few weeks since it was a custom order)
__________________________________________________
Downgraded to a 2013 636. Previous owner of a 2010 250r --------------------------------- My moto-vlog YouTube channel http://www.youtube.com/bloomingtonninja |
|
March 21st, 2013, 10:57 PM | #5 |
Gear crash test dummy
Name: Max
Location: South Bay (So. Cal)
Join Date: May 2011 Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r Posts: A lot.
|
super active member here and I WANT YOUR PRELOAD ADJUSTERS!!
Pretty pleaseeeeeeeeee sidenote: $3000 for this bike is cheap, $2400 for active members? Somebody buy now.
__________________________________________________
CVMA #531 |
|
March 21st, 2013, 10:59 PM | #6 | |
B-Town Ninja
Name: Nathan
Location: Bloomington, IN
Join Date: Feb 2011 Motorcycle(s): Black 2013 Ninja ZX6R ABS Posts: 609
Blog Entries: 3
|
Quote:
Edit: yeah, it's not about the money. Locally, IU Bloomington is known to be the home of a lot of squids and 'bad' riders. It's rare to see someone smart enough to buy a 250, so I'm trying to keep the price as 'fair' to that as I can. I'd much MUCH rather sell it for $2,400 to a member here than $3,000 to some random guy. That's why I'll just do a part out here if it doesn't sell by the time my posts expire.
__________________________________________________
Downgraded to a 2013 636. Previous owner of a 2010 250r --------------------------------- My moto-vlog YouTube channel http://www.youtube.com/bloomingtonninja |
|
|
March 21st, 2013, 11:23 PM | #7 |
Gear crash test dummy
Name: Max
Location: South Bay (So. Cal)
Join Date: May 2011 Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r Posts: A lot.
|
That's very admirable of you. I would not feel comfortable selling a bike to a squid.
If you do decide to part out contact me about preload adjusters and your fork springs if you're selling those. And the jet kit too!
__________________________________________________
CVMA #531 |
|
March 25th, 2013, 05:41 PM | #8 |
ninjette.org newbie
Name: Eric
Location: St. Louis, MO
Join Date: Mar 2013 Motorcycle(s): 2006 R6r Posts: 8
|
I would like to buy this bike. I left you a voicemail. Please call me back or email me. Thank you.
|
|
March 25th, 2013, 06:12 PM | #9 |
Gear crash test dummy
Name: Max
Location: South Bay (So. Cal)
Join Date: May 2011 Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r Posts: A lot.
|
Buy it without the preload adjusters... YOU DONT NEED THEM!
__________________________________________________
CVMA #531 |
1 out of 1 members found this post helpful. |
March 25th, 2013, 09:04 PM | #10 |
ninjette.org certified postwhore
Name: S
Location: CA/MA, usually
Join Date: Nov 2012 Motorcycle(s): 2012 Ninja 250R, 2007 Ninja 650R, 2001 F650 Dakar Posts: A lot.
|
Ugh, why are bikes so much more expensive in California? Still you're really giving that bike away. I wish I could buy it. Sounds like a very well-taken care of and tastefully modified bike.
|
|
March 26th, 2013, 10:36 AM | #11 |
Beer Me!
Name: Jimmy
Location: SoCal 818
Join Date: Oct 2011 Motorcycle(s): '13 Ninja 300 Car(s): '09 Cube, '93 240SX (Coupe & 'Vert) Posts: 144
|
I'd so buy this if I was local to you or vice versa.
|
|
March 26th, 2013, 11:42 AM | #12 |
crash 250, get supersport
Name: Richard
Location: San Diego, CA
Join Date: Apr 2010 Motorcycle(s): 2010 250R SE (Sold 6/9/14), 2009 ZX-6R (Sold 6/25/14), Subaru BRZ Posts: A lot.
|
Awwwww yeahhhhh.
GLWS, good to see the generous offer for active Ninjette members. |
|
March 26th, 2013, 12:37 PM | #14 |
ninjette.org certified postwhore
Name: .
Location: .
Join Date: Feb 2011 Motorcycle(s): . Posts: Too much.
MOTM - Feb '13, Feb '14
|
Did alex shank just tell someone to sell their bike for more than they have it listed for????
|
|
March 26th, 2013, 06:10 PM | #15 |
Gear crash test dummy
Name: Max
Location: South Bay (So. Cal)
Join Date: May 2011 Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r Posts: A lot.
|
__________________________________________________
CVMA #531 |
|
March 27th, 2013, 12:49 AM | #16 |
B-Town Ninja
Name: Nathan
Location: Bloomington, IN
Join Date: Feb 2011 Motorcycle(s): Black 2013 Ninja ZX6R ABS Posts: 609
Blog Entries: 3
|
If I were in Cali or if someone here were willing to pay $3,500 for it, I sure would :P
For now, it's just about selling it quickly with little effort as I'm a busy guy. Once my 636 comes in and this freak snow dissipates, I don't think I'll even have time to mess with the sale until I take a vacation. As an update: I have 3 people who are good candidates to buy. One, seeing it for the first time on Friday, one for the second time on Friday (for a test drive) and one for the first time on Saturday. @Trailerboy531 no word on those preloads yet :P
__________________________________________________
Downgraded to a 2013 636. Previous owner of a 2010 250r --------------------------------- My moto-vlog YouTube channel http://www.youtube.com/bloomingtonninja |
|
March 27th, 2013, 12:08 PM | #17 |
Gear crash test dummy
Name: Max
Location: South Bay (So. Cal)
Join Date: May 2011 Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r Posts: A lot.
|
They wont even use them, you should just sell them to me anyway. $80 shipped!!
__________________________________________________
CVMA #531 |
|
March 29th, 2013, 11:35 PM | #18 | |
B-Town Ninja
Name: Nathan
Location: Bloomington, IN
Join Date: Feb 2011 Motorcycle(s): Black 2013 Ninja ZX6R ABS Posts: 609
Blog Entries: 3
|
Bike has been sold can close the thread.
Quote:
__________________________________________________
Downgraded to a 2013 636. Previous owner of a 2010 250r --------------------------------- My moto-vlog YouTube channel http://www.youtube.com/bloomingtonninja |
|
|
March 29th, 2013, 11:39 PM | #19 |
Gear crash test dummy
Name: Max
Location: South Bay (So. Cal)
Join Date: May 2011 Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r Posts: A lot.
|
Oh i know I was just really interested in them being cheaper
Thanks for the heads up!
__________________________________________________
CVMA #531 |
|
March 30th, 2013, 12:03 AM | #20 |
ninjette.org certified postwhore
Name: Hansveer
Location: Bombay, India
Join Date: Jan 2012 Motorcycle(s): Ninja 250r - Track whore, Ninja 300 - SOLD, KTM RC390 - Orange Hulk, Ducati 899 Panigale - Red Devil. Posts: A lot.
|
Make then yourself... All you need is a drill + tap + bolt + washers + nuts... lol I'll explain the whole process to you if you like.
|
|
March 30th, 2013, 12:27 AM | #21 |
Gear crash test dummy
Name: Max
Location: South Bay (So. Cal)
Join Date: May 2011 Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r Posts: A lot.
|
Nah I've ghetto rigged somet hings before... Since i'm just using it to race I want to make sure it's been done right by (not me)
__________________________________________________
CVMA #531 |
|
March 30th, 2013, 12:48 AM | #22 |
ninjette.org certified postwhore
Name: Hansveer
Location: Bombay, India
Join Date: Jan 2012 Motorcycle(s): Ninja 250r - Track whore, Ninja 300 - SOLD, KTM RC390 - Orange Hulk, Ducati 899 Panigale - Red Devil. Posts: A lot.
|
I actually have an extra set with me, I could ship them to you if you want... Just pay shipping...
|
|
March 30th, 2013, 01:28 AM | #23 |
Gear crash test dummy
Name: Max
Location: South Bay (So. Cal)
Join Date: May 2011 Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r Posts: A lot.
|
Set of home made ones or SSR?
Shipping from India is what? $500?
__________________________________________________
CVMA #531 |
|
March 30th, 2013, 01:33 AM | #24 |
ninjette.org certified postwhore
Name: Hansveer
Location: Bombay, India
Join Date: Jan 2012 Motorcycle(s): Ninja 250r - Track whore, Ninja 300 - SOLD, KTM RC390 - Orange Hulk, Ducati 899 Panigale - Red Devil. Posts: A lot.
|
Home made ones... Shipping, I'll let you know... Not 500$ for sure... lol maybe 20-30$ but they aren't with me right now, i'll let you know once I have them in hand.
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
New guy..Heavily modified 1996 250 | akexel | New Members | 37 | April 23rd, 2015 09:04 AM |
[kropotkin thinks...] - More Moto2 Details - Spec Engine Will Be Heavily Modified CBR | Ninjette Newsbot | Motorcycling News | 0 | May 4th, 2009 03:40 PM |
|
|