Frame sliders, bar ends...

liltenatattoo · August 28th, 2009, 10:36 AM

I'm looking for no cut frame sliders, bar ends, and i forget the name of the other thing, i think it's spools (it's the piece to hold the bike on a stand, it's attached near the rear tire)
if anyone has any of these things they aren't using, i don't care if they are used, just not damaged.
my bike got knocked over some how, and i don't want any damage if this happens again. my bar end got messed up and a bad scratch on my exhaust, i'm a lil upset, but no damage to the plastics.

if not then i'll have to look for them, any ideas where to get them cheap?

zev42 · August 28th, 2009, 01:49 PM

Check out eBay. They've got spools starting from $19 and no-cut frame sliders starting from $130.

liltenatattoo · August 29th, 2009, 02:30 PM

thanks!!! will do. any suggestions on which ones you like best?

andrewexd · August 29th, 2009, 02:41 PM

shogun is supposed to be good frame sliders. you should know though, frame sliders will only help in low speed drops, anything else and no cut frame sliders will either brake (by design) or bad ones will damage the bike itself.

liltenatattoo · August 29th, 2009, 03:13 PM

i don't expect them to do much, unless my bike mysteriously gets knocked over in my parking lot again, hopefully it will save more than it did this time. i know if i'm riding it fast there will still be lots of damage. but thanks for the knowledge.

SpyderGirl · September 4th, 2009, 01:46 PM

I have some spools from my bike if you're interested. You can have them for $15 shipped. They have some minor scuffing from my accident, but otherwise are in good shape. They are black. All hardware is includeed, installation takes like 5 minutes. Let me know.

AnarchoMoltov · September 4th, 2009, 02:39 PM

Get the shogun no-cut crash kit...It comes with everything you need...The frame sliders, bar ends, and the spools...Here's a link to them on new enough: http://www.newenoughhp.com/parts/sli...crash_kit.html

You may be able to find it cheaper somewhere else, but this is what you are looking 4....

rockNroll · September 6th, 2009, 08:33 PM

I have the original equipment bar ends if you need em.

August 28th, 2009, 10:36 AM	#1
liltenatattoo ninjette.org member Name: Tena Location: Morris Co. NJ Join Date: Jul 2009 Motorcycle(s): 2008 blue 250r "KameSane" Posts: 67	Frame sliders, bar ends... I'm looking for no cut frame sliders, bar ends, and i forget the name of the other thing, i think it's spools (it's the piece to hold the bike on a stand, it's attached near the rear tire) if anyone has any of these things they aren't using, i don't care if they are used, just not damaged. my bike got knocked over some how, and i don't want any damage if this happens again. my bar end got messed up and a bad scratch on my exhaust, i'm a lil upset, but no damage to the plastics. if not then i'll have to look for them, any ideas where to get them cheap?

September 4th, 2009, 01:46 PM	#6
SpyderGirl 3 for street, 2 for dirt Name: Katlyn Location: San Francisco Bay Area (California) Join Date: Mar 2009 Motorcycle(s): 2008 Can Am Spyder PE #1344 / 2009 Kawi KLX140L Monster Energy / 2009 Kawi Ninja 250R (RIP 8.23.09) Posts: 586	I have some spools from my bike if you're interested. You can have them for $15 shipped. They have some minor scuffing from my accident, but otherwise are in good shape. They are black. All hardware is includeed, installation takes like 5 minutes. Let me know. __________________________________________________ Feel free to look me up on facebook.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Shogun bar-end and frame sliders	sofo	Motorcycle-related	1	May 25th, 2010 10:48 AM
2009 ninja 250r frame sliders, bar ends, swingarm spools	ajaygraci	Items Wanted	13	May 1st, 2010 09:21 PM

August 28th, 2009, 01:49 PM	#2
zev42 ninjette.org member Name: Michelle Location: Covina, CA Join Date: Aug 2009 Motorcycle(s): 2008 Ninja 250R Posts: 89	Check out eBay. They've got spools starting from $19 and no-cut frame sliders starting from $130.

August 29th, 2009, 02:30 PM	#3
liltenatattoo ninjette.org member Name: Tena Location: Morris Co. NJ Join Date: Jul 2009 Motorcycle(s): 2008 blue 250r "KameSane" Posts: 67	thanks!!! will do. any suggestions on which ones you like best?

August 29th, 2009, 02:41 PM	#4
andrewexd ninjette.org guru Name: Andrew Location: LA Join Date: Aug 2009 Motorcycle(s): 07 GSXR600 (N250 sold :( ) Posts: 415	shogun is supposed to be good frame sliders. you should know though, frame sliders will only help in low speed drops, anything else and no cut frame sliders will either brake (by design) or bad ones will damage the bike itself.

August 29th, 2009, 03:13 PM	#5
liltenatattoo ninjette.org member Name: Tena Location: Morris Co. NJ Join Date: Jul 2009 Motorcycle(s): 2008 blue 250r "KameSane" Posts: 67	i don't expect them to do much, unless my bike mysteriously gets knocked over in my parking lot again, hopefully it will save more than it did this time. i know if i'm riding it fast there will still be lots of damage. but thanks for the knowledge.

September 4th, 2009, 02:39 PM	#7
AnarchoMoltov ninjette.org guru Name: Dan Location: Chicago, il.... Join Date: Jun 2009 Motorcycle(s): 2007 Suzuki GSX-R750 Posts: 378	Get the shogun no-cut crash kit...It comes with everything you need...The frame sliders, bar ends, and the spools...Here's a link to them on new enough: http://www.newenoughhp.com/parts/sli...crash_kit.html You may be able to find it cheaper somewhere else, but this is what you are looking 4....

September 6th, 2009, 08:33 PM	#8
rockNroll . Name: rock Location: greenville, south carolina Join Date: Jun 2009 Motorcycle(s): black Posts: A lot.	I have the original equipment bar ends if you need em.