January 21st, 2012, 08:04 PM | #41 | |
Blind 250 Loving Whore
Name: Tom
Location: Chesapeake, VA
Join Date: May 2011 Motorcycle(s): 2008 250R, 02 FZ1, '20 Fat Bob 114 Posts: A lot.
|
Quote:
|
|
|
January 21st, 2012, 08:06 PM | #42 |
Avid Kitteh Poster
Name: Justin
Location: Norcal
Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.
|
where I live I would be surprised if I get pulled over for it but I suppose we will see... lol My buddy has some but you can barely even see they are there and he hasnt gotten pulled over yet... for that at least. lol
__________________________________________________
I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/ |
|
January 21st, 2012, 08:51 PM | #43 |
cuz
Name: Israel
Location: Houston (me) Galveston
Join Date: Jul 2011 Motorcycle(s): 09 ninja 250r Posts: A lot.
|
all most there ur bike is going to be killer
__________________________________________________
THE GOOD LIFE |
|
January 21st, 2012, 09:37 PM | #44 |
ninjette.org guru
Name: Chris
Location: Newnan, G.A.
Join Date: Jan 2012 Motorcycle(s): 2008 Kawasaki Ninja 250R Posts: 347
|
Man that bikes coming along good, glad to see progress coming along! Whenever that things done though, I'm almost positive it's gonna be SICK!! Definently worth the time spent working and waiting on it!
|
|
January 21st, 2012, 11:13 PM | #45 |
Avid Kitteh Poster
Name: Justin
Location: Norcal
Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.
|
thanks for the encouragement guys, at this point I just want to get the damn thing done to the point where I can ride it!
hopefully ill get it painted this week. I just wanna ride it again! little stuff keeps coming up though and i have to add more spot putty then sand more, and stuff like that... :/ sooooon.
__________________________________________________
I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/ |
|
January 21st, 2012, 11:15 PM | #46 |
ninjette.org certified postwhore
Name: .
Location: .
Join Date: Feb 2011 Motorcycle(s): . Posts: Too much.
MOTM - Feb '13, Feb '14
|
|
|
January 21st, 2012, 11:17 PM | #47 |
Avid Kitteh Poster
Name: Justin
Location: Norcal
Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.
|
haha I know it cleared up today (its been raining for the last few) so it was like 60 degrees and sunny.
__________________________________________________
I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/ |
|
January 21st, 2012, 11:37 PM | #48 |
I hate driving...
Name: S
Location: SW Ohio
Join Date: Jul 2010 Motorcycle(s): 13 Triumph Street Triple R, 09 Ninja 250r (Sold 4/20/12) Posts: A lot.
|
When are you getting those fairings done? The last couple of projects I did my team painted our final designs neon green and black and it was awesome. I'm sure yours is will come out sweet
__________________________________________________
09 ninja 2fiddy SE Driving slow things fast |
|
January 21st, 2012, 11:47 PM | #49 |
Avid Kitteh Poster
Name: Justin
Location: Norcal
Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.
|
prolly shoot it this week if I got those stratches covered good enough today. I need to ask my Uncle if I can shoot paint over spot putty though. Im not sure. If I can Ill make sure it gets done this week.
for the sake of being cheap, and making it east on myself im just painting the bike black. I will be doing green decals that match the pegs and rims (when I get around to doing those) I figure the good thing about doing it this way is I can change the color scheme in the future but just rePC'ing the pegs and rims, and changing decal colors and anything else I have that color. what makes me think this way is if my wife really decides to get into riding (she keeps saying she wants to, but idk) and wants a pink bike. pink and black bike. just get some pink decals trade rims with someone and do the same thing I did with the green with the pink. So that is one of the reasons for why I am doing it this way....
__________________________________________________
I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/ |
|
February 2nd, 2012, 09:14 AM | #50 |
Avid Kitteh Poster
Name: Justin
Location: Norcal
Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.
|
Pics... enjoy. more soon.
Painted in the Paint Booth high tech **** mmmmm heat uncle painting hey look paint They are baking/curing right now. Should be ready to fix up soon. Im sure there are some imperfections as I am no prep pro... :/
__________________________________________________
I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/ |
|
February 2nd, 2012, 09:21 AM | #51 |
ninjette.org certified postwhore
Name: .
Location: .
Join Date: Feb 2011 Motorcycle(s): . Posts: Too much.
MOTM - Feb '13, Feb '14
|
took long enough. Loser
looks great so far. Waiting for the proper color. Green |
|
February 2nd, 2012, 09:25 AM | #52 |
Avid Kitteh Poster
Name: Justin
Location: Norcal
Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.
|
been having a hard time matching decals.
and since I only have $10 in my account.. that may be awhile :/ selling some stuff to try and finish this bitch!
__________________________________________________
I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/ |
|
February 2nd, 2012, 09:55 AM | #53 |
Recalculating. . .
Name: Jason
Location: Colorado
Join Date: Nov 2011 Motorcycle(s): '09 250 (sold) '12 Ninja 650 Posts: 353
|
Sweet! Fresh paint! Looking good!
__________________________________________________
jasontracewell.com |
|
February 2nd, 2012, 10:25 AM | #54 |
Avid Kitteh Poster
Name: Justin
Location: Norcal
Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.
|
more pics. running a second cure cycle because it was damp on the big pieces and I put a thumb print in the edge. DOH!
__________________________________________________
I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/ |
|
February 2nd, 2012, 11:42 AM | #55 |
ninjette.org certified postwhore
Name: .
Location: .
Join Date: Feb 2011 Motorcycle(s): . Posts: Too much.
MOTM - Feb '13, Feb '14
|
Damn that's smooth.
Is that straight black or is there metallic flake in it? it looks different |
|
February 2nd, 2012, 11:45 AM | #56 |
Avid Kitteh Poster
Name: Justin
Location: Norcal
Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.
|
SUPER JET BLACK!!!
lol whatever that means... its just a cheap gloss black I picked up. There are imperfections but im hoping I can get them out. But like my uncle said. Once they are on and the decals are on and everything the few I prolly wont be able to get out will most likely not be noticeable. Pretty stoked to get it all on and start riding again. We will see if it happens this weekend. Id like to but Im not betting on it. I have a lot to this weekend. :/
__________________________________________________
I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/ |
|
February 2nd, 2012, 11:47 AM | #57 |
ninjette.org certified postwhore
Name: .
Location: .
Join Date: Feb 2011 Motorcycle(s): . Posts: Too much.
MOTM - Feb '13, Feb '14
|
It must just be the lighting then. Either that or I need to get my eyes checked.
Still looks pretty good. |
|
February 2nd, 2012, 11:51 AM | #58 |
Avid Kitteh Poster
Name: Justin
Location: Norcal
Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.
|
Im SUPER picky dude. little tiny imperfections bug the **** out of me. So it looks GREAT to most people. I only see the imperfections. lol thats just how i am...
Its pretty shiny though so im overall pretty happy with it. I just gotta save up now to get new tires so I can PC the rims Green I think Ill do that before I get decals. I kind of like it bare. We will see how it looks on the frame.
__________________________________________________
I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/ |
|
February 2nd, 2012, 01:26 PM | #59 |
Avid Kitteh Poster
Name: Justin
Location: Norcal
Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.
|
my friend touched the paint while it was still soft on the gas tank. there is a palm print now!
my uncle says itll come out though.
__________________________________________________
I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/ |
|
February 2nd, 2012, 02:44 PM | #60 |
Blind 250 Loving Whore
Name: Tom
Location: Chesapeake, VA
Join Date: May 2011 Motorcycle(s): 2008 250R, 02 FZ1, '20 Fat Bob 114 Posts: A lot.
|
Lol, man that sucks. Hope that friend now has a matching palm print on his face.
|
|
February 2nd, 2012, 02:52 PM | #61 |
wat
Name: wat
Location: tustin/long beach
Join Date: Sep 2009 Motorcycle(s): wat Posts: Too much.
Blog Entries: 5
MOTM - Oct '12, Feb '14
|
aaarggggghhhh i hate that. if you put down enough clear it should sand away fine though
__________________________________________________
|
|
February 2nd, 2012, 04:03 PM | #62 |
Avid Kitteh Poster
Name: Justin
Location: Norcal
Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.
|
lol he is so much bigger than me. He felt so bad to. Its not his fault he was helping my uncle move my stuff cause I was on the phone and he thought it was completely dry.
Alex I actually went cheap and did a single stage paint. However there are like 4 coats on the gas tank. So I should still be able to sand it down and buff and polish it out. My uncle was bragging about how he got no runs then we picked up the rear fairing and one had a run on the back side. I could repaint it, but I probably wont because its on the underside and no one is going to see it and im impatient. gonna let it chill in the paint booth for the next few days. I may get to it this weekend, I may not. Not sure yet. Depends on my schedule.
__________________________________________________
I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/ |
|
February 4th, 2012, 07:00 PM | #63 |
Avid Kitteh Poster
Name: Justin
Location: Norcal
Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.
|
So I got all the stuff moved over to wear my bike is. I started to install the Proton FM's and got confused. didnt have my comp to search the DIYs and my son was driving me insane. so I just went home. I dont really care about the super bowl tomorrow, so im skipping out on church and fixing my car with my buddy at 10AM then when we are done with that Ill head over to my Gpas and get a little more done hopefully. Id like to at least get the plastics back on and such. shimming the carbs may have to wait. Ill have to see how ****** it sounds and feels I guess... although I dont want to take it all apart again :/ so we will see what I decide. I know I need to shim them though as they could have used a shimming pre slip on anyways.
another problem I forsee is the whole putting the rubber pieces back on, as well as remembering what goes where.... I didnt organize it well at all cause I am a total dumbass ugh. Also I have to figure out what I am going to do about my bar ends... I guess I shouldnt really be to worried about putting it back together then taking it apart again as I will have to at least take the rear apart again to install the integrated rear light... I imagine the seat cowl will get here monday or tuesday as well.. The front fairings will all be coming off soon since I just got some LED strips in. Ill have to figure out how imma wire that in as well. I may just cheat and buy a kit then try and splice these ones in if possible as well... ugh so much to do. Someone come help me. I need company.
__________________________________________________
I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/ |
|
February 4th, 2012, 07:44 PM | #64 |
Blind 250 Loving Whore
Name: Tom
Location: Chesapeake, VA
Join Date: May 2011 Motorcycle(s): 2008 250R, 02 FZ1, '20 Fat Bob 114 Posts: A lot.
|
Lol, it'll get easier man. I've taken the bike apart and put it back together so many times. It takes like 2 seconds to take the fairings off and put them on now. Once you memorize where everything goes, it won't feel like such a pain lol.
|
|
February 4th, 2012, 08:25 PM | #65 |
Avid Kitteh Poster
Name: Justin
Location: Norcal
Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.
|
Yeah I bet thats true, since its only my first time with everything off. :/
I am going to have a hard time remembering where the specific pieces of rubber go on the plastic too :/
__________________________________________________
I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/ |
|
February 10th, 2012, 08:41 AM | #66 |
Avid Kitteh Poster
Name: Justin
Location: Norcal
Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.
|
gonna finish this bitch today or tomorrow.
By finish I mean have it rideable... Ill still need to do the wheels and buy some more stuff. LED kit, Shorty Levers, Tires,.. and I think that's actually it. Decals are in question now. I might keep it clean with no decals
__________________________________________________
I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/ |
|
February 10th, 2012, 08:47 AM | #67 |
ninjette.org guru
Name: Chris
Location: Newnan, G.A.
Join Date: Jan 2012 Motorcycle(s): 2008 Kawasaki Ninja 250R Posts: 347
|
Can't wait to see it man, its been long enough!!! First thing you better do when its done is take some pictures of it!!
|
|
February 10th, 2012, 08:47 AM | #68 |
ninjette.org guru
Name: Chris
Location: Newnan, G.A.
Join Date: Jan 2012 Motorcycle(s): 2008 Kawasaki Ninja 250R Posts: 347
|
and decals, or no decals, its still gonna be one slick looking bike.
|
|
February 10th, 2012, 09:22 AM | #69 |
Avid Kitteh Poster
Name: Justin
Location: Norcal
Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.
|
haha word. I will be taking pics as soon as shes back together.
Ill have to take it apart again pretty soon though lol. LED light kit and new rear light... so she is just together temporarily.
__________________________________________________
I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/ |
|
February 10th, 2012, 07:57 PM | #70 |
Avid Kitteh Poster
Name: Justin
Location: Norcal
Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.
|
started her up and made a video but my phone didnt save it :/ Like I said earlier. no one has 3mm washers so I had to order them. Ill be testing it out seeing how it feels in the mean time.
__________________________________________________
I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/ |
|
February 10th, 2012, 08:24 PM | #71 |
#squid
Name: nickypoo
Location: Five Guys
Join Date: Jul 2011 Motorcycle(s): Track dedicated 2008 ZX6R Posts: A lot.
MOTM - Jul '16
|
Doood. Finally!! It looks great!!!
__________________________________________________
|
|
February 10th, 2012, 08:28 PM | #72 |
Avid Kitteh Poster
Name: Justin
Location: Norcal
Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.
|
ha thanks
fairings need to go on. but I fired her up and she sounded great. But Oh I forgot to say. I think my gas gauge is broken? It may have gotten wet but idk? what would cause it to read empty? I think there is enough gas in there for it to register some? also that pic sucks. Ill have a few good ones up tomorrow. Im already hating how dirty the black gets. There are finger prints all over it. lol
__________________________________________________
I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/ |
|
February 10th, 2012, 08:39 PM | #73 |
#squid
Name: nickypoo
Location: Five Guys
Join Date: Jul 2011 Motorcycle(s): Track dedicated 2008 ZX6R Posts: A lot.
MOTM - Jul '16
|
That's why I hate glossy paints!!
__________________________________________________
|
|
February 10th, 2012, 08:45 PM | #74 |
Avid Kitteh Poster
Name: Justin
Location: Norcal
Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.
|
haha its worth it.
looks dope.
__________________________________________________
I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/ |
|
February 10th, 2012, 08:51 PM | #75 |
#squid
Name: nickypoo
Location: Five Guys
Join Date: Jul 2011 Motorcycle(s): Track dedicated 2008 ZX6R Posts: A lot.
MOTM - Jul '16
|
Coool! I never got why people use the word "dope" to describe good stuff lol
__________________________________________________
|
|
February 10th, 2012, 09:06 PM | #76 |
cuz
Name: Israel
Location: Houston (me) Galveston
Join Date: Jul 2011 Motorcycle(s): 09 ninja 250r Posts: A lot.
|
sigh* California
__________________________________________________
THE GOOD LIFE |
|
February 10th, 2012, 09:07 PM | #77 |
cuz
Name: Israel
Location: Houston (me) Galveston
Join Date: Jul 2011 Motorcycle(s): 09 ninja 250r Posts: A lot.
|
y not party early :)
|
|
February 10th, 2012, 09:11 PM | #78 |
cuz
Name: Israel
Location: Houston (me) Galveston
Join Date: Jul 2011 Motorcycle(s): 09 ninja 250r Posts: A lot.
|
OGM I quit bin in the other forum to much So when is it COMPLETE??
__________________________________________________
THE GOOD LIFE |
|
February 10th, 2012, 09:12 PM | #79 |
cuz
Name: Israel
Location: Houston (me) Galveston
Join Date: Jul 2011 Motorcycle(s): 09 ninja 250r Posts: A lot.
|
OOOMMMMGGGGGG!! evn spleep that wrong that2 AWWW!!!
__________________________________________________
THE GOOD LIFE |
|
February 10th, 2012, 10:21 PM | #80 |
Avid Kitteh Poster
Name: Justin
Location: Norcal
Join Date: Sep 2011 Motorcycle(s): 2006 Yamaha TTR 50 SUCK IT Posts: A lot.
|
LOL
I think someone has been doin a bit of boozin... hahahaha Should be rideable tomorrow. Complete? mehh idk. Trying to pay stuff off then next step will be tires so I can powder coat the rims, and do all that bullshit. then shorty levers, then LEDs. Think that will be pretty much it unless we get a our HID projector/Halo set up...
__________________________________________________
I powdercoat stuff Help me pay for my addiction I say funny stuff. http://twitter.com/JustinPWNSyou sometimes... I write like a 12 year old too, http://justinpwnsyou.wordpress.com/ |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
My Ninja 250R Evolution | Roda_BR | Pictures | 7 | January 11th, 2014 09:38 PM |
massacremasses go pro adventures | massacremasses | Videos | 14 | March 13th, 2012 02:09 PM |
My ride with "massacremasses" | AlanDog | Ride Reports | 32 | February 28th, 2012 11:56 PM |
Evolution of the Ninja | Nemy | Pictures | 17 | April 7th, 2009 11:32 AM |
|
|